You searched and this document matched it.
See all results086126 · Specification Submittal · English · PDF, 6 pages, 0.6 MB
Lutron Specification Submittal: Wireless System (086126)
Lutron's system specification submittal for the Sivoia QS Wireless System, the 24 V wireless drive platform for shades and drapery.
Lutron 086126, Specification Submittal: Wireless System. https://assets.lutron.com/a/documents/086126.pdf, via https://newwaykl.com/resources/documents/lutron-specification-submittal-086126/
About document 086126
Lutron document 086126, dated 15 April 2009, is the Sivoia QS Wireless System specification submittal: drive features, power, capacity, performance, grouping, integration, controls, a wire length chart and three wiring examples.
What submittal 086126 covers
Lutron document 086126 has these eleven sections. Each link opens the PDF at that page in a new tab.
- Features, opens in a new tab page 1
- Power, opens in a new tab page 2
- System capacity, opens in a new tab page 2
- Performance, opens in a new tab page 2
- Grouping, opens in a new tab page 2
- Integration, opens in a new tab page 2
- Controls, opens in a new tab page 2
- Wire length chart, opens in a new tab page 3
- Example: one shade, individual power supply
- Example: one shade per power panel output, opens in a new tab page 5
- Example: multiple shades per power panel output, opens in a new tab page 6
Specifications in 086126
Lutron document 086126 prints 43 values in the groups the document uses, each with the document's unit. A row names the catalog codes it applies to. The page link beside each group opens the PDF where the group starts.
- Drive noise
- 44 dBA maximum at 1 m (3 ft) from the drive
- Standards
- CE
- Supply
- 24 V low-voltage
- Power failure memory
- Grouping, presets and shade limits kept for the lifetime of the product
- Systems served
- Roller shade, drapery and skylight shade
- Programmable stop points
- The drive tracks the shade position and moves it to preset locations at the touch of a button
- Operating voltage
- 24 V low-voltage power supply required
- Spike and brownout protection
- Plus or minus 10% of line voltage, all devices
- ESD protection
- Provided by the power supply for all devices
- Power source
- Lutron approved power source only
System Capacity
PDF page 2 of 086126, opens in a new tab- Maximum devices
- 100 (drive units, QS Wireless seeTouch keypads, QS Wireless Pico controls, RadioRa-SR devices)
- Maximum zones
- 100, wireless shades and drapes included
Performance
PDF page 2 of 086126, opens in a new tab- Stored positions per drive
- Presets at any stop point, plus full open and full close limits
- Stop accuracy
- 0.125 in (3 mm) steps over the full travel
- Preset adjustment
- 5 second press and hold on a seeTouch QS wireless keypad or Pico control
- Wireless range
- 30 ft (9 m)
- Alignment of multiple drives
- Within 0.125 in (3 mm) at all times
- Limit programming
- From the drive units, seeTouch QS wireless keypads or Pico controls
- Group control
- Any drive, group or subgroup from a system keypad; no group controller or extra interface
- Mixed treatments
- Groups and subgroups may mix window treatment types
Integration
PDF page 2 of 086126, opens in a new tab- Lighting control
- RadioRa-SR, no separate interface
- Third-party systems
- RS232 and ethernet for A/V equipment, timeclocks and security systems
- Control devices
- seeTouch QS wireless keypads; Sivoia QS wireless Pico controls
- Programming points
- Microprocessors in the drive, the keypads and the Pico controls; program from any of them
Wire length chart: power panel output
PDF page 3 of 086126, opens in a new tab- 1 drive, 12 AWG (4 mm²)
- 500 ft (150 m)
- 1 drive, 16 AWG (1.5 mm²)
- 200 ft (60 m)Models: QSHY-CBLP-M-1000
- 1 drive, 18 AWG (1 mm²)
- 100 ft (30 m)
- 2 roller 64 up to 30 sq ft (2.75 sq m) each, 12 AWG (4 mm²)
- 200 ft (60 m)
- 2 roller 64 up to 30 sq ft (2.75 sq m) each, 16 AWG (1.5 mm²)
- 75 ft (20 m)Models: QSHY-CBLP-M-1000
- 2 roller 64 up to 30 sq ft (2.75 sq m) each, 18 AWG (1 mm²)
- 50 ft (15 m)
- 3 roller 64 up to 20 sq ft (1.8 sq m) each, or 2 Roller 100 up to 50 sq ft (4.6 sq m) each
- Printed in the same distance band: 200 ft (60 m) on 12 AWG (4 mm²), 75 ft (20 m) on 16 AWG (1.5 mm²), 50 ft (15 m) on 18 AWG (1 mm²)
Wire length chart: individual power supply
PDF page 3 of 086126, opens in a new tab- Maximum drives per supply
- 1
- Total wire length, 12 AWG (4 mm²)
- 250 ft (75 m)
- Total wire length, 16 AWG (1.5 mm²)
- 100 ft (30 m)Models: QSHY-CBLP-M-1000
- Total wire length, 18 AWG (1 mm²)
- 50 ft (15 m)
Wire length chart
PDF page 3 of 086126, opens in a new tab- Drives the chart applies to
- roller 20, roller 64, roller 100, roller 200CW, roller 225, D105, D145, D175, skylight
Wiring examples
PDF pages 4, 5 and 6 of 086126, opens in a new tab- Individual power supply
- SZ-PS-P1-1-50Models: SZ-PS-P1-1-50
- Shade in the individual power supply example
- Roller 64, 25 sq ft (2.25 sq m)
- Power panel
- 120 V 60 Hz feedModels: QSPSY-P1-10-60
- Multiple shades per output example
- Two roller 64, 25 sq ft (2.25 sq m) each
- Pico wireless control
- Battery powered, 3 V battery included
- Sivoia QS Wireless seeTouch keypad
- Open, Preset and Close buttons
- Line feed shown
- 120 V~ 60 Hz
Facts Lutron states in 086126
The values Lutron document 086126 states, as published:
- Drives covered
- Roller shade, drapery and skylight shade drive units
- Chart footnote drives
- roller 20, 64, 100, 200CW and 225, D105, D145, D175 and skylight
- Noise
- No more than 44 dBA at 1 m (3 ft) from the drive
- Power
- 24 V low-voltage supply from a Lutron approved source
- Protection
- The control system power supply gives every device spike and brownout overvoltage protection and ESD protection
- Overvoltage protection
- Plus or minus 10% of line voltage
- Listing
- CE
- System capacity
- Up to 100 devices and 100 zones, with drives, keypads, Pico controls and RadioRa-SR devices all counting as devices
- Positioning
- Stops in 0.125 in (3 mm) steps, with grouped shades aligned within 0.125 in (3 mm)
- Presets
- Anywhere between the limits, set with a 5 second press and hold
- Limits
- Set from the drive, a keypad or a Pico
- Wireless range
- 30 ft (9 m)
- Grouping and integration
- No group controller needed
- RadioRa-SR lighting joins with no interface
- RS232 and ethernet for A/V, timeclock and security systems
- Programming memory
- Grouping, presets and limits kept through power failures for the life of the product
- Panel output, one drive
- 12 AWG (4 mm²): 500 ft (150 m)
- 16 AWG (1.5 mm²): 200 ft (60 m)
- 18 AWG (1 mm²): 100 ft (30 m)
- Shared output shades
- Two roller 64 shades up to 30 sq ft (2.75 sq m) each
- Three roller 64 shades up to 20 sq ft (1.8 sq m) each
- Two Roller 100 shades up to 50 sq ft (4.6 sq m) each
- Shared output wire lengths
- 12 AWG (4 mm²): 200 ft (60 m)
- 16 AWG (1.5 mm²): 75 ft (20 m)
- 18 AWG (1 mm²): 50 ft (15 m)
- Individual supply, one drive
- 12 AWG (4 mm²): 250 ft (75 m)
- 16 AWG (1.5 mm²): 100 ft (30 m)
- 18 AWG (1 mm²): 50 ft (15 m)
- Wiring examples
- SZ-PS-P1-1-50 individual supply or QSPSY-P1-10-60 power panel, each with a battery Pico and a QS Wireless seeTouch keypad
Questions about document 086126
The answers come from Lutron document 086126 and New Way's record of it.
What is Lutron document 086126?
Lutron's six-page Sivoia QS Wireless System specification submittal, printed 04.15.09 on every page footer with no revision letter. Lutron's platform covers roller shades, drapery tracks and skylight shades, with figures a tender can quote.
Which revision of 086126 is current?
Lutron publishes document 086126 without a revision letter. New Way checked it against assets.lutron.com on 15 October 2026.
How many devices and zones can a Sivoia QS Wireless system hold?
Lutron document 086126 allows up to 100 devices and 100 zones.
Drive units, QS Wireless seeTouch keypads, QS Wireless Pico controls and RadioRa-SR devices all count as devices. Wireless shades and drapes count toward the 100 zones.
How far can the power wire run?
Lutron document 086126 allows one drive per power panel output at 500 ft (150 m) on 12 AWG (4 mm²).
- 16 AWG (1.5 mm²): 200 ft (60 m)
- 18 AWG (1 mm²): 100 ft (30 m)
- Individual supply: 250 ft (75 m), 100 ft (30 m), 50 ft (15 m)
Can several shades share one power panel output?
Lutron document 086126 lets one output feed two or three roller 64 shades or two Roller 100 shades.
- Two roller 64: up to 30 sq ft (2.75 sq m) each
- Three roller 64: up to 20 sq ft (1.8 sq m) each
- Two Roller 100: up to 50 sq ft (4.6 sq m) each
How quiet and how precise are the drives?
Lutron document 086126 puts the drive at no more than 44 dBA, taken 1 m (3 ft) away. Each drive stops in 0.125 in (3 mm) steps, and grouped shades stay aligned within 0.125 in (3 mm) while they travel.
What controls the shades, and how far can they be?
Lutron document 086126 names seeTouch QS wireless keypads and Sivoia QS wireless Pico controls, with a wireless range of 30 ft (9 m).
Presets are adjusted with a 5 second press and hold. The drives also answer RadioRa-SR lighting control with no extra interface.
Which models does 086126 name?
Document 086126 names three models: QSHY-CBLP-M-1000 (16 AWG (1.5 mm²) power cable named in the wire length chart), SZ-PS-P1-1-50 (Individual power supply in the one-shade-per-output example), QSPSY-P1-10-60 (Power panel in the power panel output examples).
Not covered in 086126, and what to read next
Lutron document 086126 holds no mounting steps, terminal wiring or programming sequence, and gives shade areas only as wiring conditions.
Publisher and citation for document 086126
Lutron Electronics Co., Inc. publishes document 086126 and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 15 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Lutron?
New Way supplies and installs Lutron shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 086126 filled in.
