You searched and this document matched it.
See all results086130 · Specification Submittal · Rev A · Feb 2026 · English · PDF, 9 pages, 0.6 MB
Lutron Sivoia QS Tension Shades and Skylights Specification Submittal (086130, rev A)
Lutron's specification submittal for the tensioned roller shade chassis, a framed skylight shade for QS and QS wireless drives.
Lutron 086130 Rev A (February 2026), Sivoia QS Tension Shades and Skylights Specification Submittal. https://assets.lutron.com/a/documents/086130.pdf, via https://newwaykl.com/resources/lutron/tension-shades-and-skylights/sivoia-qs/lutron-sivoia-qs-tension-shades-and-skylights-specification-submittal-086130/
About document 086130
Lutron document 086130, Rev A of February 2026, is the tensioned roller shade chassis specification submittal: Class 2 35 V DC power and supplies, environment, mounting and shade options, frame, angles, system sizes and wiring.
What submittal 086130 covers
Lutron document 086130 has these nine sections. Each link opens the PDF at that page in a new tab.
- Aesthetics, design, control and installation, opens in a new tab page 1
- Low-voltage power, compatible power sources and environment, opens in a new tab page 2
- Mounting options and configuration options, opens in a new tab page 3
- Shade options, opens in a new tab page 4
- Frame information, shipping options and angles of installation, opens in a new tab page 5
- System parameters: standard configuration, opens in a new tab page 6
- System parameters: meet-in-the-middle configuration, opens in a new tab page 7
- Tensioned shade wiring: keypad and drive power, opens in a new tab page 8
- Tensioned shade wiring: wireless receiver, opens in a new tab page 9
Specifications in 086130
Lutron document 086130 prints 59 values in the groups the document uses, each with the document's unit. A row names the catalog codes it applies to. The page link beside each group opens the PDF where the group starts.
Tensioned Roller Shade
PDF page 1 of 086130, opens in a new tab- Drive unit
- Housed inside the frame; moves the shade, tracks its position and adjusts to set positions
- Drive units
- QS and QS wireless
- Noise
- 44 dBA maximum at 3 ft (1 m) from the EDU
Aesthetics
PDF page 1 of 086130, opens in a new tab- Fascia
- Closes light gaps around the fabric when closed
- Cable guides
- Concealed, for a clear view through the skylight when open
- Fiberglass-based fabrics
- Available for light filtering and blackout
- Trim
- Added trim may be needed to hide gaps between frame and mounting surface
- Frame
- Tension-absorbing; keeps stress off the surrounding ceiling structure
- Configurations
- Standard, meet-in-the-middle
Low-Voltage Power
PDF page 2 of 086130, opens in a new tab- Operating voltage
- Class 2, 35 V DC
- Power source
- Lutron NEC Class 2 power supply only
- Overvoltage protection
- Plus or minus 10% of line voltage, all devices
- ESD protection
- Provided by the power supply, all devices
- Power failure
- Shade programming kept
Compatible Power Sources
PDF page 2 of 086130, opens in a new tab- Individual plug-in power supply
- QSPS-P1-1-35V, QSPS-P2-1-35V, QSPS-P3-1-35VModels: QSPS-P1-1-35V, QSPS-P2-1-35V, QSPS-P3-1-35V
- 10-output power panels
- QSPS-10PNL, QSPSY-10PNLModels: QSPS-10PNL, QSPSY-10PNL
- Configurable power panels
- QSPS-10PNL-NPM, QSPS-30PNL-NPM, each with WIN-PS-5CC-R installedModels: QSPS-10PNL-NPM, QSPS-30PNL-NPM, WIN-PS-5CC-R
- Individual junction box
- QSPS-J-1-35VModels: QSPS-J-1-35V
Power Supply Models
PDF page 8 of 086130, opens in a new tab- Plug
- NEMA 5-15Models: QSPS-P1-1-35V
- Plug
- CEE 7/7Models: QSPS-P2-1-35V
- Plug
- BS 1363Models: QSPS-P3-1-35V
- Plug
- JIS C 8303Models: QSPS-P4-1-35V
Environment
PDF page 2 of 086130, opens in a new tab- Ambient operating temperature
- 32 °F to 104 °F (0 °C to 40 °C)
- Humidity
- 90% maximum, non-condensing
- Location
- Indoor use only
Mounting Options
PDF page 3 of 086130, opens in a new tab- Frame mounting
- Inside of, recessed into or outside of the window opening; inside of or recessed into a window frame
- Skylight mounts
- Inside, recessed, surface
- Window mounts
- Inside, recessed
Configuration Options
PDF page 3 of 086130, opens in a new tab- Standard
- Optional customer-provided trim
- Meet-in-the-middle
- Optional customer-provided trim
Shade Options
PDF page 4 of 086130, opens in a new tab- Hem bar
- Half-wrap
- Fabric roll orientation
- Unwinds from the roller closest to the glass
- Drive side
- Left or right
Fabric Options
PDF page 4 of 086130, opens in a new tab- Light filtering
- UV protection, high transparency, openness factor 1% or higher
- Blackout
- Maximum UV protection, 0% openness factor, blocks 100% of daylight
Shade Options
PDF page 4 of 086130, opens in a new tab- Installation angle, angled shade
- 0° to 135°
- Installation angle, bottom-up shade
- -1° to -135°
Frame Information
PDF page 5 of 086130, opens in a new tab- Frame thickness and depth
- Standard at every system size
- System dimensions figure, value not labeled in the text
- 4.75 in (121 mm)
Shipping Options
PDF page 5 of 086130, opens in a new tab- Pre-assembled
- Units up to 30 sq ft (2.8 sq m)
- Components
- Assembled on site
Angles of Installation
PDF page 5 of 086130, opens in a new tab- Range
- -135° to +135°
System Parameters: Standard Configuration
PDF page 6 of 086130, opens in a new tab- Minimum system size
- 24 1/16 in (611 mm) wide x 24 in (610 mm) long
- Maximum system size
- 96 in (2438 mm) wide x 144 in (3658 mm) long
- Frame thickness, drive end
- 4.65 in (118 mm)
- Frame thickness, non-drive end and sides
- 2.25 in (57 mm)
System Parameters: Meet-in-the-Middle Configuration
PDF page 7 of 086130, opens in a new tab- Minimum system size
- 24 1/16 in (611 mm) wide x 48 in (1219 mm) long
- Maximum system size
- 96 in (2438 mm) wide x 288 in (7315 mm) long
- Frame thickness, drive ends
- 4.65 in (118 mm)
- Frame thickness, sides
- 2.25 in (57 mm)
Tensioned Shade Wiring
PDF page 8 of 086130, opens in a new tab- Wire type A, keypad power and COM
- 18 AWG to 22 AWG (1.0 mm² to 0.5 mm²), 250 ft (75 m) max, MUX/MUX twisted pair, shieldedModels: GRX-CBL-346S-500
- Wire type B, drive power, 12 AWG (4.0 mm²)
- 250 ft (75 m) max
- Wire type B, drive power, 16 AWG (1.5 mm²)
- 100 ft (30 m) max
- Wire type B, drive power, 18 AWG (1.0 mm²)
- 50 ft (17 m) max, as printed
- Lutron drive power cables
- QSHY-CBL-M-1000 non-plenum; QSHY-CBLP-M-1000 plenumModels: QSHY-CBL-M-1000, QSHY-CBLP-M-1000
- Drive connector
- 4-pin EDU connector: MUX, MUX, V+, COM
Tensioned Shade Wiring (continued)
PDF page 9 of 086130, opens in a new tab- QS wireless drive power
- Wire type A on this page; 12 AWG (4.0 mm²) 250 ft (75 m), 16 AWG (1.5 mm²) 100 ft (30 m), 18 AWG (1.0 mm²) 50 ft (17 m) max
- RF receiver
- QS wireless only; drive RF and receiver connectors pre-wired
- Terminals 3 and 4
- Wired communication only; not used in wireless control installations
Facts Lutron states in 086130
The values Lutron document 086130 states, as published:
- Drive and noise
- QS and QS wireless drive units, with shade components at or below 44 dBA, taken 3 ft (1 m) from the drive
- Power
- Class 2, 35 V DC, Lutron NEC Class 2 supply only
- Overvoltage protection, plus or minus 10% of line voltage
- ESD protection to every device
- Shade programming survives a power loss
- Compatible power sources
- Plug-in: QSPS-P1-1-35V, QSPS-P2-1-35V, QSPS-P3-1-35V
- 10-output panels: QSPS-10PNL, QSPSY-10PNL
- Configurable panels: QSPS-10PNL-NPM, QSPS-30PNL-NPM, with WIN-PS-5CC-R
- Junction box: QSPS-J-1-35V
- Environment
- 32 °F to 104 °F (0 °C to 40 °C), humidity up to 90% without condensation, indoor use only
- Mounting
- Skylight: inside, recessed or surface mount
- Window: inside or recessed mount
- Configuration: standard or meet-in-the-middle, optional customer-provided trim
- Shade options
- Half-wrap hem bar
- Fabric unwinds from the roller closest to the glass
- Drive on the left or right
- Light filtering fabrics: openness factor 1% or higher
- Blackout fabrics: 0% openness, blocking 100% of daylight
- Look and trim
- Fascia closes light gaps around the closed fabric
- Cable guides hidden
- Added trim suggested where the frame alone may not meet aesthetic needs
- Frame and shipping
- Drive end 4.65 in (118 mm)
- Sides and non-drive end 2.25 in (57 mm)
- 4.75 in (121 mm) printed in the system dimensions figure
- Ships pre-assembled up to 30 sq ft (2.8 sq m), or as components
- Installation angle
- Any angle between -135° and +135°, for angled windows, skylights and bottom-up shades
- Standard configuration size
- Maximum 96 in (2438 mm) wide by 144 in (3658 mm) long
- Minimum 24 1/16 in (611 mm) wide by 24 in (610 mm) long
- Final limits depend on fabric and angle
- Meet-in-the-middle size
- Maximum 96 in (2438 mm) wide by 288 in (7315 mm) long
- Minimum 24 1/16 in (611 mm) wide by 48 in (1219 mm) long
- Both ends are drive ends
- Keypad power and COM wire
- 18 AWG to 22 AWG (1.0 mm² to 0.5 mm²) shielded MUX twisted pair to 250 ft (75 m), GRX-CBL-346S-500
- Drive power wire
- 12 AWG (4.0 mm²) to 250 ft (75 m)
- 16 AWG (1.5 mm²) to 100 ft (30 m)
- 18 AWG (1.0 mm²) to 50 ft (17 m as printed)
- QS wireless wiring
- Drive power only, with the same wire limits
- RF receiver connectors pre-wired to the drive
- Terminals 3 and 4: wired communication only, unused when wireless
Questions about document 086130
The answers come from Lutron document 086130 and New Way's record of it.
What is Lutron document 086130?
Lutron's nine-page tensioned roller shade chassis specification submittal, part number 086130a, dated 4 February 2026.
Which revision of 086130 is current?
Rev A, dated February 2026, is the revision Lutron publishes. New Way checked it against assets.lutron.com on 15 October 2026.
Which tension shades and skylights does 086130 cover?
Lutron Sivoia QS tension shades and skylights.
How large can a tensioned roller shade be?
Lutron document 086130 sets a standard shade at 96 in (2438 mm) by 144 in (3658 mm) maximum.
- Standard minimum: 24 1/16 in (611 mm) wide by 24 in (610 mm) long
- Meet-in-the-middle maximum: 96 in (2438 mm) wide by 288 in (7315 mm) long
- Meet-in-the-middle minimum: 24 1/16 in (611 mm) wide by 48 in (1219 mm) long
What power does the shade take?
Lutron document 086130 specifies Class 2, 35 V DC from a Lutron NEC Class 2 supply.
- Plug-in: QSPS-P1-1-35V, QSPS-P2-1-35V, QSPS-P3-1-35V
- Panels: QSPS-10PNL, QSPSY-10PNL, QSPS-10PNL-NPM, QSPS-30PNL-NPM
- Junction box QSPS-J-1-35V; configurable panels carry WIN-PS-5CC-R
What wire runs to the drive?
Up to 250 ft (75 m) on 12 AWG (4.0 mm²) drive power wire, per Lutron document 086130.
- 16 AWG (1.5 mm²): up to 100 ft (30 m)
- 18 AWG (1.0 mm²): up to 50 ft (printed as 17 m)
- Cables: QSHY-CBL-M-1000 non-plenum, QSHY-CBLP-M-1000 plenum
How is a QS wireless tensioned shade wired?
Lutron document 086130 shows only the drive power run, from the power supply to the 4-pin EDU connector. The RF receiver's connectors come pre-wired to the drive.
Terminals 3 and 4 carry wired communication only and stay unused when the shade is wireless.
Which fabrics does the shade take, and how does it look closed?
Lutron document 086130 offers light filtering fabrics, 1% openness or higher, and blackout fabrics, 0% openness, both with fiberglass-based options. The fascia closes light gaps around the closed fabric.
Where the frame alone may not meet aesthetic needs, Lutron suggests added trim between the frame and the mounting surface.
Other Sivoia QS specification submittals
Specification submittals for the same Sivoia QS system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 086126Specification Submittal: Wireless System |
Documents used with 086130
Lutron document 3671530 is the product brochure and 045156 the chassis installation guide for the tensioned shade in submittal 086130. Lutron document 086126 is the Sivoia QS Wireless system specification submittal for the QS wireless drive units that 086130 names.
| Document | Type | Revision | Date |
|---|---|---|---|
| 3671530Tension Shades and Skylights Product Brochure: Tensioned Roller Shades | Product Brochure | I | May 2016 |
| 045156Tension Shades and Skylights Installation Guide | Installation Guide | B | |
| Tension Shades and Skylights CAD Drawing: Angled Skylight Inside Mount (Length), Detail View | CAD Drawing | A | |
| Tension Shades and Skylights CAD Drawing: Bottom-Up Angled Inside-Mount Recessed Mount, Section View | CAD Drawing | A | |
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 3683231Application Note: Care and Maintenance of Window Treatments | Application Note | C | |
| 3671319Product Brochure: Residential Shading Solutions | Product Brochure | K | Feb 2023 |
| Performance Specification: Section 086710, Skylight Shades | Performance Specification |
Revisions of 086130
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Feb 2026 | Current. The file on assets.lutron.com. Checked 15 Oct 2026. |
Not covered in 086130, and what to read next
Lutron document 086130 gives no installation steps, limit setting or programming.
Publisher and citation for document 086130
Lutron Electronics Co., Inc. publishes document 086130, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 15 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 086130 filled in.
