You searched and this document matched it.
See all results085750 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Serena Honeycomb Shades CAD Drawing: Architectural Inside Mount, Section View (085750)
Lutron's CAD section of the architectural honeycomb shade on an inside mount, with the stack height range noted.
Lutron 085750 Rev A, Serena Honeycomb Shades CAD Drawing: Architectural Inside Mount, Section View. https://assets.lutron.com/a/documents/085750.pdf, via https://newwaykl.com/resources/lutron/honeycomb-shades/triathlon/lutron-serena-honeycomb-shades-cad-drawing-085750/
About document 085750
Lutron drawing 085750, revision A, is the one-sheet inside mount section, view 1 at scale 3/4: glazing, trim and wood blocking labeled, stack height and ordered shade height labels, stack note and clearance note.
What drawing 085750 covers
Lutron document 085750 has these six sections, all on its one page.
- Sheet header: architectural honeycomb shade, inside mount
- Section with glazing, trim and wood blocking
- Stack height and ordered shade height
- Stack height note
- Clearance note for the master technician
- Title block: drawing number, scale, view and revision
Specifications in 085750
Lutron document 085750 prints 13 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
Section view (view 1)
PDF page 1 of 085750, opens in a new tab- Stack height
- Labeled on the section; range given in the note
- Ordered shade height
- Labeled, no value printed
- Stack height range (note)
- 2.5 in to 5 in
- Stack height depends on (note)
- Shade height and fabric selection
- Actual stack height (note)
- Estimated during the online order process
- Construction labeled
- Glazing (typical), trim and wood blocking
Title block
PDF page 1 of 085750, opens in a new tab- Sheet header
- Architectural honeycomb shade, inside mount
- Drawing number
- 085750
- Scale
- 3/4
- View
- 1
- Revision
- A
- View title
- Section view
- Clearance note
- Shade installed as the factory supplies it has the clearances it needs to operate; the master technician keeps them after installation
Facts Lutron states in 085750
The values Lutron document 085750 states, as published:
- Subject
- Architectural honeycomb shade, inside mount, section view
- View, scale and revision
- View 1, scale 3/4, revision A. No issue date printed
- Stack height range
- 2.5 in to 5 in, printed in inches only
- What sets the stack height
- The shade height and the fabric selected
- Actual stack height
- Estimated during the online order process, with no single figure on the sheet
- Labeled without values
- The stack height and ordered shade height dimensions
- Construction labeled
- Typical glazing, trim and wood blocking
- Clearance note
- A shade installed as supplied by the factory has the clearances for proper operation. The master technician keeps them after installation
- File formats
- PDF of one page, with DWG and DXF files of the same drawing
- Not on the sheet
- Fixing sizes, bracket positions, the blocking size and the power option are not stated in the document
Questions about document 085750
The answers come from Lutron document 085750 and New Way's record of it.
What is Lutron drawing 085750?
Lutron's one-page PDF with DWG and DXF files, naming the architectural honeycomb shade only, not Serena or Triathlon.
Which revision of 085750 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which honeycomb shades does 085750 cover?
Lutron Triathlon honeycomb shades.
How tall is the stack on an inside mount?
Lutron drawing 085750 gives a stack height between 2.5 in and 5 in, set by shade height and fabric. Lutron says the actual figure is estimated during the online order process, so the sheet prints a range.
Does the inside mount section give fixing or blocking sizes?
Lutron drawing 085750 labels the wood blocking but prints no blocking size, fixing size or bracket position. Those values are not stated in the document.
Who keeps the clearances right after the shade is fitted?
Lutron drawing 085750 states that a shade installed as the factory supplies it has the clearances it needs. Lutron makes the master technician responsible for keeping those clearances after installation.
Does the fabric choice change the stack height?
Lutron drawing 085750 ties the stack height to the fabric selection as well as the shade height. The stack still falls within 2.5 in to 5 in.
Is the stack height given in millimeters?
Lutron drawing 085750 prints the stack range in inches only, 2.5 in to 5 in, with no millimeter figure.
Other Triathlon CAD drawings
CAD drawings for the same Triathlon system:
All 19 Triathlon CAD drawingsDocuments used with 085750
Lutron's 085751 and 085752 are the inside elevation and battery access views; 085756, 085753 and 085754 the wall mount views. Lutron document 3682573 is the Serena honeycomb and wood blinds stack specification submittal and 045902 the installation guide.
| Document | Type | Revision | Date |
|---|---|---|---|
| 3682573Serena Honeycomb and Wood Blinds Stack Specification Submittal | Specification Submittal | L | Jan 2022 |
| 045902Serena and Architectural Honeycomb Shades Installation Guide | Installation Guide | A | Feb 2022 |
| 085745Serena and Architectural Honeycomb Shades Specification Submittal | Specification Submittal | F | Sep 2023 |
| 085300Serena Cable-Guided Insulating Honeycomb Shades Specification Submittal | Specification Submittal | A | May 2013 |
| 045836Serena and Wood Blinds Installation Guide | Installation Guide | F | Mar 2025 |
| 045866Serena Cable Guided Insulating Honeycomb Door Shade Installation Guide | Installation Guide | A | Aug 2020 |
| Honeycomb Shades Revit Family: Insulating | Revit Family | ||
| 085276Serena 10 Output Power Panel Power Supply (12 V) Specification Submittal | Specification Submittal | C | May 2016 |
| 085283Serena Individual Plug-In Power Supply Specification Submittal | Specification Submittal | D | Nov 2018 |
| Serena Application Note: Blink Codes | Application Note |
Revisions of 085750
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085750, and what to read next
Lutron drawing 085750 gives a stack range, not the order's figure, and no fixing sizes, bracket positions or power details.
Publisher and citation for document 085750
Lutron Electronics Co., Inc. publishes document 085750, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron, Triathlon and Serena are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Triathlon?
New Way supplies and installs Lutron Triathlon shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085750 filled in.
