You searched and this document matched it.
See all results085756 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Serena Honeycomb Shades CAD Drawing: Architectural Wall Mount Battery Access, Section View (085756)
Lutron's CAD section of the architectural honeycomb shade on a wall mount, drawn to show the battery access.
Lutron 085756 Rev A, Serena Honeycomb Shades CAD Drawing: Architectural Wall Mount Battery Access, Section View. https://assets.lutron.com/a/documents/085756.pdf, via https://newwaykl.com/resources/lutron/honeycomb-shades/triathlon/lutron-serena-honeycomb-shades-cad-drawing-085756/
About document 085756
Lutron drawing 085756, revision A, is the one-sheet wall mount battery access section, view 1 at scale 1/2: glazing and wood blocking labeled, an unlabeled 3.50 in (89 mm) dimension, stack note and clearance note.
What drawing 085756 covers
Lutron document 085756 has these seven sections, all on its one page.
- Sheet header: wall mount battery access
- Section with glazing and wood blocking
- Battery access
- Dimension of 3.50 in (89 mm)
- Stack height note
- Clearance note for the master technician
- Title block: drawing number, scale, view and revision
Specifications in 085756
Lutron document 085756 prints 13 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
Section view (view 1)
PDF page 1 of 085756, opens in a new tab- Dimension with no label on the sheet
- 3.50 in (89 mm)
- Battery access
- Labeled, no dimension of its own
- Stack height range (note)
- 2.5 in to 5 in
- Stack height depends on (note)
- Shade height and fabric selection
- Actual stack height (note)
- Estimated during the online order process
- Construction labeled
- Glazing (typical) and wood blocking
Title block
PDF page 1 of 085756, opens in a new tab- Sheet header
- Architectural honeycomb shade, wall mount battery access
- Drawing number
- 085756
- Scale
- 1/2
- View
- 1
- Revision
- A
- View title
- Section view
- Clearance note
- Shade installed as the factory supplies it has the clearances it needs to operate; the master technician keeps them after installation
Facts Lutron states in 085756
The values Lutron document 085756 states, as published:
- Subject
- Architectural honeycomb shade, wall mount battery access, section view
- View, scale and revision
- View 1, scale 1/2, revision A. No issue date printed
- Dimension printed
- 3.50 in (89 mm), with no label on the sheet
- Stack height range
- 2.5 in to 5 in, printed in inches only
- What sets the stack height
- The shade height and the fabric selected
- Actual stack height
- Estimated during the online order process, with no single figure on the sheet
- Construction labeled
- Typical glazing and wood blocking, no trim labeled
- Clearance note
- A shade installed as supplied by the factory has the clearances for proper operation. The master technician keeps them after installation
- File formats
- PDF of one page, with DWG and DXF files of the same drawing
- Not on the sheet
- Battery type, count and life, fixing sizes and bracket positions are not stated in the document
Questions about document 085756
The answers come from Lutron document 085756 and New Way's record of it.
What is Lutron drawing 085756?
Lutron's one-page PDF with DWG and DXF files, naming the architectural honeycomb shade only, not Serena or Triathlon.
Which revision of 085756 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which honeycomb shades does 085756 cover?
Lutron Triathlon honeycomb shades.
What dimension does Lutron print on the wall mount battery access section?
Lutron drawing 085756 prints one dimension, 3.50 in (89 mm), and gives it no label on the sheet.
How tall is the stack on a wall-mounted architectural honeycomb shade?
Lutron drawing 085756 puts the stack height between 2.5 in and 5 in, set by shade height and fabric. Lutron says the actual figure is estimated during the online order.
Is window trim shown on the wall mount battery access section?
Lutron drawing 085756 labels the typical glazing, the wood blocking and the battery access, and no trim.
Who keeps the clearances right after the shade is installed?
Lutron drawing 085756 states that a shade installed as the factory supplies it has the clearances it needs. Lutron makes the master technician responsible for keeping those clearances after installation.
Does the fabric choice change the stack on a wall mount?
Lutron drawing 085756 ties the stack height to the fabric selection as well as the shade height. Two fabrics at the same shade height can stack differently within 2.5 in to 5 in.
Other Triathlon CAD drawings
CAD drawings for the same Triathlon system:
All 19 Triathlon CAD drawingsDocuments used with 085756
Lutron's 085752 is the inside mount battery access view; 085753 and 085754 the trim spacer wall mount views (085754 tilted). Lutron's 085750 and 085751 are the inside section and elevation views, and 045902 the Serena and architectural honeycomb installation guide.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045902Serena and Architectural Honeycomb Shades Installation Guide | Installation Guide | A | Feb 2022 |
| 085745Serena and Architectural Honeycomb Shades Specification Submittal | Specification Submittal | F | Sep 2023 |
| 085300Serena Cable-Guided Insulating Honeycomb Shades Specification Submittal | Specification Submittal | A | May 2013 |
| 045836Serena and Wood Blinds Installation Guide | Installation Guide | F | Mar 2025 |
| 045866Serena Cable Guided Insulating Honeycomb Door Shade Installation Guide | Installation Guide | A | Aug 2020 |
| Honeycomb Shades Revit Family: Insulating | Revit Family | ||
| 085276Serena 10 Output Power Panel Power Supply (12 V) Specification Submittal | Specification Submittal | C | May 2016 |
| 085283Serena Individual Plug-In Power Supply Specification Submittal | Specification Submittal | D | Nov 2018 |
| Serena Application Note: Blink Codes | Application Note | ||
| 048561Serena Application Note: Optimizing Battery Life in Shades | Application Note | F | Oct 2024 |
Revisions of 085756
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085756, and what to read next
Lutron drawing 085756 does not label its 3.50 in (89 mm) dimension and gives no fixing sizes, bracket positions or battery details.
Publisher and citation for document 085756
Lutron Electronics Co., Inc. publishes document 085756, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron, Triathlon and Serena are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Triathlon?
New Way supplies and installs Lutron Triathlon shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085756 filled in.
