You searched and this document matched it.
See all results085751 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Serena Honeycomb Shades CAD Drawing: Architectural Inside Mount, Elevation View (085751)
Lutron's CAD elevation of the architectural honeycomb shade inside a window opening, with its two light gaps dimensioned.
Lutron 085751 Rev A, Serena Honeycomb Shades CAD Drawing: Architectural Inside Mount, Elevation View. https://assets.lutron.com/a/documents/085751.pdf, via https://newwaykl.com/resources/lutron/honeycomb-shades/triathlon/lutron-serena-honeycomb-shades-cad-drawing-085751/
About document 085751
Lutron drawing 085751, revision A, is the one-sheet inside window elevation, view 2 at scale 1/1: order width, shade height and stack height labels, two light gap figures and the master technician's clearance note.
What drawing 085751 covers
Lutron document 085751 has these seven sections, all on its one page.
- Sheet header: architectural honeycomb shade, inside window elevation
- Elevation inside the window opening
- Inside mount order width
- Ordered shade height and stack height
- Minimum light gap and gap at fabric
- Clearance note for the master technician
- Title block: drawing number, scale, view and revision
Specifications in 085751
Lutron document 085751 prints 13 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
Elevation view (view 2)
PDF page 1 of 085751, opens in a new tab- Minimum light gap
- 0.13 in (3 mm), marked 2X
- Light gap at fabric
- 0.19 in (5 mm), marked 2X
- Inside mount order width
- Labeled, no value printed
- Ordered shade height
- Labeled, no value printed
- Stack height
- Labeled, no value printed
- Construction labeled
- Wall and window opening
Title block
PDF page 1 of 085751, opens in a new tab- Sheet header
- Architectural honeycomb shade, inside window elevation
- Drawing number
- 085751
- Scale
- 1/1
- View
- 2
- Revision
- A
- View title
- Elevation view
- Clearance note
- Shade installed as the factory supplies it has the clearances it needs to operate; the master technician keeps them after installation
Facts Lutron states in 085751
The values Lutron document 085751 states, as published:
- Subject
- Architectural honeycomb shade, inside window elevation
- View, scale and revision
- View 2, elevation view, scale 1/1, revision A. No issue date printed
- Mounting shown
- Inside mount: the shade sits within the window opening in the wall
- Minimum light gap
- 0.13 in (3 mm), marked 2X (two places)
- Light gap at the fabric
- 0.19 in (5 mm), marked 2X (two places)
- Labeled without values
- Inside mount order width, ordered shade height and stack height
- Clearance note
- A shade installed as supplied by the factory has the clearances for proper operation. The master technician keeps them after installation
- File formats
- PDF of one page, with DWG and DXF files of the same drawing
- Not on the sheet
- Fixing positions, bracket details, the power option, the fabric and size limits are not stated in the document
Questions about document 085751
The answers come from Lutron document 085751 and New Way's record of it.
What is Lutron drawing 085751?
Lutron's one-page PDF with matching DWG and DXF files, naming the architectural honeycomb shade only, not Serena or Triathlon.
Which revision of 085751 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which honeycomb shades does 085751 cover?
Lutron Triathlon honeycomb shades.
What light gaps does Lutron show for an inside-mounted architectural honeycomb shade?
Lutron drawing 085751 prints a minimum light gap of 0.13 in (3 mm) and a light gap at the fabric of 0.19 in (5 mm). Lutron marks each figure 2X, so each gap is dimensioned for two places.
Which dimensions does the elevation leave without a figure?
Lutron drawing 085751 labels the inside mount order width, the ordered shade height and the stack height without values. Lutron's sheet gives figures only for the two light gaps.
Who keeps the clearances right once the shade is installed?
Lutron drawing 085751 states that a shade installed as the factory supplies it has the clearances it needs. Lutron makes the master technician responsible for keeping those clearances after installation.
Will an inside-mounted honeycomb shade fill the opening edge to edge?
Lutron drawing 085751 dimensions light gaps rather than an edge-to-edge fit, so narrow gaps of light show inside the opening. The minimum light gap is 0.13 in (3 mm) and the gap at the fabric 0.19 in (5 mm).
Does the elevation show how much window the stack takes?
Lutron drawing 085751 labels the stack height on the elevation but prints no figure for it. The stack size is therefore not stated in the document.
Other Triathlon CAD drawings
CAD drawings for the same Triathlon system:
All 19 Triathlon CAD drawingsDocuments used with 085751
Lutron's 085750 and 085752 are the inside mount and battery access views; 085756, 085753 and 085754 the wall mount views. Lutron document 045902 is the installation guide and 085745 the specification submittal for the Serena and architectural honeycomb shades.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045902Serena and Architectural Honeycomb Shades Installation Guide | Installation Guide | A | Feb 2022 |
| 085745Serena and Architectural Honeycomb Shades Specification Submittal | Specification Submittal | F | Sep 2023 |
| 085300Serena Cable-Guided Insulating Honeycomb Shades Specification Submittal | Specification Submittal | A | May 2013 |
| 3682573Serena Honeycomb and Wood Blinds Stack Specification Submittal | Specification Submittal | L | Jan 2022 |
| 045836Serena and Wood Blinds Installation Guide | Installation Guide | F | Mar 2025 |
| 045866Serena Cable Guided Insulating Honeycomb Door Shade Installation Guide | Installation Guide | A | Aug 2020 |
| Honeycomb Shades Revit Family: Insulating | Revit Family | ||
| 085276Serena 10 Output Power Panel Power Supply (12 V) Specification Submittal | Specification Submittal | C | May 2016 |
| 085283Serena Individual Plug-In Power Supply Specification Submittal | Specification Submittal | D | Nov 2018 |
| Serena Application Note: Blink Codes | Application Note |
Revisions of 085751
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085751, and what to read next
Lutron drawing 085751 shows the elevation only, without fixing positions, bracket details, the power option or the stack size.
Publisher and citation for document 085751
Lutron Electronics Co., Inc. publishes document 085751, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron, Triathlon and Serena are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Triathlon?
New Way supplies and installs Lutron Triathlon shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085751 filled in.
