You searched and this document matched it.
See all resultsCAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Tension Shades and Skylights CAD Drawing: Bottom-Up Inside Mount, Elevation View
Lutron's tensioned roller detail of the Sivoia QS bottom-up shade in an inside mount, a 1/8 scale typical elevation.
Lutron, Sivoia QS Tension Shades and Skylights CAD Drawing: Bottom-Up Inside Mount, Elevation View. https://assets.lutron.com/a/documents/0099-butr-imt-f.pdf, via https://newwaykl.com/resources/lutron/tension-shades-and-skylights/sivoia-qs/lutron-sivoia-qs-tension-shades-and-skylights-cad-drawing-bottom-up-inside-mount-elevation-view/
About this Sivoia QS drawing
Lutron drawing 0099-BUTR-IMT-F, revision A, is an elevation of a divided-pane window inside its trim, with a 24.00 in (610 mm) minimum width, 36.00 in (914 mm) minimum height and an inside mount deduction note.
What this Sivoia QS drawing covers
This Sivoia QS drawing has these eleven sections.
- Header band: tensioned roller detail, scale 1/8
- Code 0099-BUTR-IMT-F in the header band
- View 1, typical elevation at scale 1/8
- Bottom-up shade inside a window opening
- Labeled part: window trim
- Minimum width 24.00 in (610 mm)
- Minimum height 36.00 in (914 mm)
- Two asterisked and two unmarked dimensions
- Note: inside mount deduction, 1/8 in all sides
- Title block: bottom-up shade, inside mount (elevation)
- Drawing number line blank, revision A, 2009 copyright
Specifications in this Sivoia QS drawing
This Sivoia QS drawing prints nine values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Minimum width
- 24.00 in (610 mm)
- Minimum height
- 36.00 in (914 mm)
- Marked with an asterisk, at the top left of the view
- 0.13 in (3 mm)
- Marked with an asterisk, at the top right of the view
- 0.13 in (3 mm)
- At the left of the view
- 2.33 in (59 mm)
- At the lower left of the view
- 4.64 in (118 mm)
- Deduction for inside mount, all sides
- 1/8 in
- Scale
- 1/8
- Revision
- A
Facts Lutron states in this Sivoia QS drawing
The values this Sivoia QS drawing states, as published:
- Drawing code and revision
- 0099-BUTR-IMT-F in the header band and revision A in the title block, with the drawing number line blank
- Sheet title
- Bottom-up shade, inside mount (elevation), under the header tensioned roller detail
- Scale
- 1/8, printed in the header band and under view 1
- Minimum width
- 24.00 in (610 mm), marked across the top of the view
- Minimum height
- 36.00 in (914 mm), marked at the right of the view
- Inside mount deduction
- 1/8 in on all sides by the sheet's note, with the two asterisked dimensions reading 0.13 in (3 mm)
- Asterisked dimensions
- 0.13 in (3 mm) at the top left and the top right of the view
- Unlabeled dimensions
- 2.33 in (59 mm) at the left of the view and 4.64 in (118 mm) at the lower left
- Labeled part
- Window trim
- Also drawn
- The inside mount within the opening, with a hatched band near its foot
- File formats
- PDF (one page, about 104 KB), DWG and DXF
- Date
- Copyright 2009, no issue date
Questions about this Sivoia QS drawing
The answers come from this Sivoia QS drawing and New Way's record of it.
What is this Sivoia QS drawing?
Lutron's tensioned roller detail of the Sivoia QS bottom-up shade in an inside mount, a 1/8 scale typical elevation. Lutron drawing 0099-BUTR-IMT-F, revision A, is an elevation of a divided-pane window inside its trim, with a 24.00 in (610 mm) minimum width, 36.00 in (914 mm) minimum height and an inside mount deduction note.
Which revision of this Sivoia QS drawing is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which tension shades and skylights does this Sivoia QS drawing cover?
Lutron Sivoia QS tension shades and skylights.
What does Lutron drawing 0099-BUTR-IMT-F show?
Lutron's elevation draws a window with divided panes inside the window trim, the inside mount within the opening. Lutron marks the minimum width and height and prints four further dimensions.
What are the minimum sizes on the bottom-up inside mount elevation?
Lutron marks a minimum width of 24.00 in (610 mm) and a minimum height of 36.00 in (914 mm). No maximum is printed on drawing 0099-BUTR-IMT-F.
What deduction applies to the bottom-up inside mount?
Lutron's note calls for a deduction of 1/8 in on all sides for the inside mount. The two dimensions marked with the same asterisk read 0.13 in (3 mm), at the top left and the top right of the view.
Does the drawing carry a number, revision or date?
Lutron's header band prints the code 0099-BUTR-IMT-F and the title block prints revision A, with the drawing number line blank. The only date is a 2009 copyright line.
Which documents go with this Sivoia QS drawing?
Three documents go with this Sivoia QS drawing, listed under Documents used with this Sivoia QS drawing with the others:
Other Sivoia QS CAD drawings
CAD drawings for the same Sivoia QS system:
All 15 Sivoia QS CAD drawingsDocuments used with this Sivoia QS drawing
Lutron drawing 0099-BUTR-IMT-F is the elevation partner of 0098-BUTR-IMT-S, the bottom-up inside mount section view. Lutron draws the angled inside mount in section as 0115-BUTR-CTM-S; 045156 is the installation guide and 086130 the specification submittal.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045156Tension Shades and Skylights Installation Guide | Installation Guide | B | |
| 086130Tension Shades and Skylights Specification Submittal | Specification Submittal | A | Feb 2026 |
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 3671530Tension Shades and Skylights Product Brochure: Tensioned Roller Shades | Product Brochure | I | May 2016 |
| 3683231Application Note: Care and Maintenance of Window Treatments | Application Note | C | |
| Performance Specification: Section 086710, Skylight Shades | Performance Specification | ||
| 3671319Product Brochure: Residential Shading Solutions | Product Brochure | K | Feb 2023 |
Revisions of this Sivoia QS drawing
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in this Sivoia QS drawing, and what to read next
Lutron drawing 0099-BUTR-IMT-F shows the elevation only: no section, no fixing size, no wiring and no mounting steps.
- Section: 0098-BUTR-IMT-S, the bottom-up inside mount section view
- Mounting: 045156, the tension shades and skylights installation guide
Publisher and citation for this Sivoia QS drawing
Lutron Electronics Co., Inc. publishes this document and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
