You searched and this document matched it.
See all results048846 · Application Note · Rev A · Nov 2024 · English · PDF, 2 pages, 58 KB
Lutron Sivoia QS Application Note: EU EcoDesign Standby Power Information (048846, rev A)
Lutron's application note giving the networked standby power per shade for Sivoia QS, Palladiom, Serena and Triathlon shades.
Lutron 048846 Rev A (November 2024), Sivoia QS Application Note: EU EcoDesign Standby Power Information. https://assets.lutron.com/a/documents/048846_eng.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-application-note-048846/
About document 048846
Lutron document 048846, Rev A of November 2024, is the EU Ecodesign Directive 2009/125/EC standby power note: one figure per external power supply in three shade groups, from 0.1 W to 1.9 W per shade.
What note 048846 covers
Lutron document 048846 has these five sections. Each link opens the PDF at that page in a new tab.
- Scope: standby power under Directive 2009/125/EC, opens in a new tab page 1
- Sivoia QS and Palladiom standby power, opens in a new tab page 1
- Sivoia QS Wireless and wireless Palladiom standby power, opens in a new tab page 1
- Standby power for Serena and Triathlon shades, opens in a new tab page 1
- Lutron contact numbers, opens in a new tab page 2
Specifications in 048846
Lutron document 048846 prints 17 values in the groups the document uses, each with the document's unit. A row names the catalog codes it applies to. The page link beside each group opens the PDF where the group starts.
- Directive
- 2009/125/EC (EU Ecodesign)
- Quantity stated
- Standby power per shade, networked standby mode
Sivoia QS shades and Palladiom shades
PDF page 1 of 048846, opens in a new tab- Single output supply, networked standby mode
- Activates automatically 5 seconds after motionModels: QSPS-P2-1-35V, QSPS-P3-1-35V
- Single output supply, standby power per shade
- 1.0 WModels: QSPS-P2-1-35V, QSPS-P3-1-35V
- 10-output supply, networked standby mode
- Activates automatically 5 seconds after motionModels: QSPS-10PNL
- 10-output supply, standby power per shade
- 1.3 W (at least 3 shades on the panel)Models: QSPS-10PNL
Sivoia QS Wireless shades and Palladiom shades with wireless receiver
PDF page 1 of 048846, opens in a new tab- Single output supply, networked standby mode
- Activates automatically 5 seconds after motionModels: QSPS-P2-1-35V, QSPS-P3-1-35V
- Single output supply, standby power per shade
- 1.2 WModels: QSPS-P2-1-35V, QSPS-P3-1-35V
- 10-output supply, networked standby mode
- Activates automatically 5 seconds after motionModels: QSPSY-10PNL
- 10-output supply, standby power per shade
- 1.9 W (at least 3 shades on the panel)Models: QSPSY-10PNL
Serena and Triathlon shades
PDF page 1 of 048846, opens in a new tab- Single output supply, networked standby mode
- Activates automatically 5 seconds after motionModels: CSPS-P2-1-6-WH, CSPS-P3-1-6-WH
- Single output supply, standby power per shade
- 0.2 WModels: CSPS-P2-1-6-WH, CSPS-P3-1-6-WH
- 10-output supply, networked standby mode
- Activates automatically 5 seconds after motionModels: CSPS-P1-10-6
- 10-output supply, standby power per shade
- 0.1 W (at least 3 shades on the panel)Models: CSPS-P1-10-6
- Application note
- #846
- Part number
- 048846
- Revision and date
- Rev. A, November 2024
Facts Lutron states in 048846
The values Lutron document 048846 states, as published:
- Scope
- Standby energy use of Lutron shading products, stated to comply with the EU Ecodesign Directive 2009/125/EC
- Shade families covered
- Sivoia QS, Sivoia QS Wireless, Palladiom (also with a wireless receiver), Serena and Triathlon
- When standby starts
- Networked standby mode starts automatically 5 seconds after motion, on every supply listed
- Sivoia QS, Palladiom, single output
- 1.0 W per shade on QSPS-P2-1-35V or QSPS-P3-1-35V
- Sivoia QS, Palladiom, 10-output
- 1.3 W per shade on QSPS-10PNL, with 3 or more shades on the panel
- Wireless shades, single output supply
- 1.2 W per shade on QSPS-P2-1-35V or QSPS-P3-1-35V, for Sivoia QS Wireless shades and Palladiom shades with a wireless receiver
- Wireless shades, 10-output supply
- 1.9 W per shade on QSPSY-10PNL, with 3 or more shades on the panel
- Serena, Triathlon, single output
- 0.2 W per shade on CSPS-P2-1-6-WH or CSPS-P3-1-6-WH
- Serena and Triathlon, 10-output supply
- 0.1 W per shade on CSPS-P1-10-6, with 3 or more shades on the panel
- Basis of the figures
- Watts per shade, not per power supply, with 10-output figures only for a panel serving at least 3 shades
- Range
- 0.1 W to 1.9 W per shade across the seven supplies listed
- Issue
- Application Note #846, P/N 048846, revision A, November 2024, two pages
Questions about document 048846
The answers come from Lutron document 048846 and New Way's record of it.
What is Lutron document 048846?
Lutron's two-page Application Note #846, P/N 048846, with office addresses and contact numbers filling page 2.
Which revision of 048846 is current?
Rev A, dated November 2024, is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 048846 cover?
Lutron Sivoia QS roller shades.
Which EU rule does Lutron document 048846 answer?
Lutron document 048846 gives standby energy figures for Lutron shading products under the EU Ecodesign Directive 2009/125/EC. Lutron states the figure as networked standby power per shade.
What standby power should a specifier declare for a Sivoia QS shade?
Lutron document 048846 gives 1.0 W per shade on a QSPS-P2-1-35V or QSPS-P3-1-35V single output supply. On the QSPS-10PNL 10-output panel Lutron gives 1.3 W per shade, with 3 or more shades on the panel.
When does a Lutron shade go into networked standby?
Lutron document 048846 states that networked standby mode starts automatically 5 seconds after motion. Lutron gives the same delay for every power supply in the note.
Is there a 10-output figure for fewer than 3 shades?
Lutron document 048846 gives the 10-output figures only for a panel with at least 3 shades connected. A figure for fewer shades is not stated in the document.
Does a wireless receiver raise the standby draw of a Palladiom shade?
Lutron document 048846 lists Palladiom shades with a wireless receiver at 1.2 W per shade on a single output supply. On the QSPSY-10PNL panel the figure is 1.9 W per shade.
The Sivoia QS shades and Palladiom shades group sits at 1.0 W and 1.3 W on the matching supplies.
Other Sivoia QS application notes
Application notes for the same Sivoia QS system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 048863Roller Shades Application Note: Fabric Aesthetic Characteristics | Clutch, Commercial Contract Manual | A | May 2026 |
| 048562Application Note: Alkaline Battery Screening and Diagnosis | Roller 20 to 300 | A | Jul 2015 |
| Application Note: Blink Codes for Shades and Venetian Blinds | Roller 20 to 300 | ||
| 3683231Application Note: Care and Maintenance of Window Treatments | Clutch, Commercial Contract Manual, Roller 20 to 300 | C |
Documents used with 048846
Lutron document 048846 names no other Lutron document; the matching documents are each family's specification submittals. Lutron documents 085705, 085333 and 085665 are the Sivoia QS Roller 64, Triathlon roller shade and Serena wood blind submittals.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085705Roller 64 Specification Submittal | Specification Submittal | D | Sep 2025 |
| 085333Triathlon Roller Shades Specification Submittal | Specification Submittal | B | |
| 085665Serena and Wood Blinds Specification Submittal | Specification Submittal | F | Aug 2025 |
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| 369847Pico Wireless Control, 4-Button Specification Submittal | Specification Submittal | K | Mar 2024 |
| CAD Drawing: Shade Equipment CAD Block | CAD Drawing | ||
| 085612Roller 100 CAD Drawing: 4.75″ x 5″ (121 x 127mm) Pocket, Detail Drawing | CAD Drawing | A | |
| 085274Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 0454114-Group RF Remote Control Installation Guide | Installation Guide | D | Jan 2015 |
Revisions of 048846
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Nov 2024 | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 048846, and what to read next
Lutron document 048846 gives standby figures only: on-mode power, supply ratings, wiring and capacity are not in the note.
Publisher and citation for document 048846
Lutron Electronics Co., Inc. publishes document 048846, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron, Sivoia QS, Triathlon, Serena and Palladiom are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 048846 filled in.
