You searched and this document matched it.
See all resultsCAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Tension Shades and Skylights CAD Drawing: Bottom-Up Recessed Mount, Section View
Lutron's tensioned roller detail of the Sivoia QS bottom-up shade on a recessed mount, drawn in section at 1/4.
Lutron, Sivoia QS Tension Shades and Skylights CAD Drawing: Bottom-Up Recessed Mount, Section View. https://assets.lutron.com/a/documents/0100-butr-rmt-s.pdf, via https://newwaykl.com/resources/lutron/tension-shades-and-skylights/sivoia-qs/lutron-sivoia-qs-tension-shades-and-skylights-cad-drawing-bottom-up-recessed-mount-section-view/
About this Sivoia QS drawing
Lutron drawing 0100-BUTR-RMT-S, revision A, holds view 1, a typical section with the glazing labeled and a break line, giving a 5.00 in (127 mm) shade recess and 38.52 in (978 mm) minimum recess height.
What this Sivoia QS drawing covers
This Sivoia QS drawing has these nine sections.
- Heading: tensioned roller detail
- Title block: bottom-up, recessed mount (section)
- Drawing 0100-BUTR-RMT-S, revision A, scale 1/4
- View 1, typical section at scale 1/4
- Break line shortening the drawn height
- Glazing
- Shade recess, 5.00 in (127 mm)
- Shade recess height, 38.52 in (978 mm) minimum
- Five dimensions without a label
Specifications in this Sivoia QS drawing
This Sivoia QS drawing prints eight values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Shade recess
- 5.00 in (127 mm)
- Shade recess height, minimum height
- 38.52 in (978 mm)
- dimension without a label, top right of the section
- 4.77 in (121 mm)
- dimension without a label, upper right of the section
- 2.25 in (57 mm)
- dimension without a label, lower center of the section
- 4.75 in (121 mm)
- dimension without a label, lower right of the section
- 4.64 in (118 mm)
- dimension without a label, bottom right of the section
- 0.13 in (3 mm)
- Scale
- 1/4
Facts Lutron states in this Sivoia QS drawing
The values this Sivoia QS drawing states, as published:
- Drawing number and revision
- 0100-BUTR-RMT-S, revision A, printed in the title block
- Sheet title
- Tensioned roller detail: bottom-up, recessed mount (section)
- View and scale
- View 1, typical section, scale 1/4
- Shade recess
- 5.00 in (127 mm)
- Shade recess height
- 38.52 in (978 mm), labeled minimum height
- Dimensions without a label
- 4.77 in (121 mm), top right of the section
- 2.25 in (57 mm), upper right
- 4.75 in (121 mm), lower center
- 4.64 in (118 mm), lower right
- 0.13 in (3 mm), bottom right
- Labeled parts
- Glazing, with no other part named on the sheet
- File formats
- PDF (one page, about 112 KB), DWG and DXF
- Date
- Copyright 2009 in the title block
Questions about this Sivoia QS drawing
The answers come from this Sivoia QS drawing and New Way's record of it.
What is this Sivoia QS drawing?
Lutron's tensioned roller detail of the Sivoia QS bottom-up shade on a recessed mount, drawn in section at 1/4. Lutron drawing 0100-BUTR-RMT-S, revision A, holds view 1, a typical section with the glazing labeled and a break line, giving a 5.00 in (127 mm) shade recess and 38.52 in (978 mm) minimum recess height.
Which revision of this Sivoia QS drawing is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which tension shades and skylights does this Sivoia QS drawing cover?
Lutron Sivoia QS tension shades and skylights.
What does Lutron drawing 0100-BUTR-RMT-S show?
Lutron prints the drawing as one page in PDF, DWG and DXF, naming no part beyond the glazing. Lutron's break line shortens the drawn height, and five dimensions carry no label.
How large a shade recess does Lutron draw?
Lutron labels the shade recess at 5.00 in (127 mm) and the shade recess height at a 38.52 in (978 mm) minimum.
Which dimensions on the section carry no label?
Lutron prints five dimensions without naming them, so read each against the drawing itself.
- 4.77 in (121 mm) top right, 2.25 in (57 mm) upper right
- 4.75 in (121 mm) lower center
- 4.64 in (118 mm) lower right, 0.13 in (3 mm) bottom right
Where is the matching elevation?
The elevation of the same bottom-up recessed mount is 0114-BUTR-RMT-F, a Sivoia QS tension shade CAD drawing.
Which documents go with this Sivoia QS drawing?
Three documents go with this Sivoia QS drawing, listed under Documents used with this Sivoia QS drawing with the others:
Other Sivoia QS CAD drawings
CAD drawings for the same Sivoia QS system:
All 15 Sivoia QS CAD drawingsDocuments used with this Sivoia QS drawing
Lutron drawing 0100-BUTR-RMT-S is the section of the bottom-up recessed mount, and 0114-BUTR-RMT-F its elevation. Lutron draws the inside mount on 0098-BUTR-IMT-S and 0099-BUTR-IMT-F, the angled one on 0115-BUTR-CTM-S; 086130 is the specification submittal.
| Document | Type | Revision | Date |
|---|---|---|---|
| 086130Tension Shades and Skylights Specification Submittal | Specification Submittal | A | Feb 2026 |
| 045156Tension Shades and Skylights Installation Guide | Installation Guide | B | |
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 3671530Tension Shades and Skylights Product Brochure: Tensioned Roller Shades | Product Brochure | I | May 2016 |
| 3683231Application Note: Care and Maintenance of Window Treatments | Application Note | C | |
| Performance Specification: Section 086710, Skylight Shades | Performance Specification | ||
| 3671319Product Brochure: Residential Shading Solutions | Product Brochure | K | Feb 2023 |
Revisions of this Sivoia QS drawing
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in this Sivoia QS drawing, and what to read next
Lutron drawing 0100-BUTR-RMT-S shows the section only: no shade width, no fastener and no control wiring.
- Elevation: 0114-BUTR-RMT-F, the bottom-up recessed mount elevation drawing
- Mounting: 045156, the Sivoia QS tension shades and skylights installation guide
Publisher and citation for this Sivoia QS drawing
Lutron Electronics Co., Inc. publishes this document and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
