You searched and this document matched it.
See all results085691 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Serena Wood Blinds CAD Drawing: Butt and Pass Application (085691)
Lutron's CAD detail of two Serena or Triathlon wood blinds meeting at a corner in a butt and pass arrangement.
Lutron 085691 Rev A, Serena Wood Blinds CAD Drawing: Butt and Pass Application. https://assets.lutron.com/a/documents/085691_butt_and_pass_corner_solution.pdf, via https://newwaykl.com/resources/lutron/wood-blinds/triathlon/lutron-serena-wood-blinds-cad-drawing-085691/
About document 085691
Lutron document 085691, revision A, is the sheet of auxiliary views for the butt and pass corner: a corner mounting recommendation, an installation order, a measurement deduction, a light gap and a section drawing reference.
What drawing 085691 covers
Lutron document 085691 has these seven sections, all on its one page.
- Butt and pass typical details
- Corner mounting recommendation
- Installation order for blind 1 and blind 2
- Measurement deduction
- Light gap
- Reference to the section drawing for mounting requirements
- Title block with scale, page and revision
Specifications in 085691
Lutron document 085691 prints 14 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
Auxiliary views
PDF page 1 of 085691, opens in a new tab- Measurement deduction
- 4.6875 in (19 mm as printed; does not match the inch value)
- Light gap
- 2.5625 in (65 mm)
- Blinds marked
- Blind 1 and blind 2
- Second scale printed
- 1/6
- Corner mounting
- Butt and pass not recommended; use corner to corner
- Installation order
- Blind 1 completely installed before the brackets for blind 2
- Mounting requirements
- See the section drawing
Title block
PDF page 1 of 085691, opens in a new tab- Product
- Serena and Triathlon wood blinds
- Subject
- Butt and pass typical details
- Sheet title
- Auxiliary views
- Number as printed
- 085691
- Scale
- 1/5
- Page
- 1
- Revision
- A
Installation walk-through for 085691
Lutron document 085691 gives two steps, in the document's order.
The clearance, the check and the warning under a step are the document's own.
Install blind 1 completely
Lutron document 085691 starts a butt and pass corner with blind 1, the blind marked #1 on the sheet. Blind 1 is installed in full before any work begins on blind 2.
Check: Blind 1 is fully installed.
Warning: Lutron warns that the blind 2 brackets interfere with installing or removing blind 1.
Fit the brackets for blind 2
Lutron document 085691 places the brackets for blind 2 only once blind 1 is in. Fitting them earlier leaves those brackets in the way of blind 1.
Warning: Taking blind 1 down later is obstructed by the blind 2 brackets.
Facts Lutron states in 085691
The values Lutron document 085691 states, as published:
- What the drawing shows
- Two Serena and Triathlon wood blinds, marked blind 1 and blind 2, meeting at a corner, butt and pass
- Corner mounting recommendation
- Not recommended by Lutron, who directs the reader to corner to corner instead
- Installation order
- Blind 1 is installed completely before any bracket for blind 2 goes up
- Why the order matters
- Lutron warns that the blind 2 brackets get in the way of fitting or removing blind 1
- Measurement deduction
- 4.6875 in, printed beside a 19 mm metric figure that does not match the inch value
- Light gap
- 2.5625 in (65 mm)
- Mounting requirements
- Lutron refers the reader to the section drawing for detailed mounting requirements
- Scale
- 1/5 in the title block, with a second scale of 1/6 printed on the sheet
- Revision
- A, page 1, with no date printed
- Files
- One-page PDF, with DWG and DXF versions of the same drawing
Questions about document 085691
The answers come from Lutron document 085691 and New Way's record of it.
What is Lutron document 085691?
Lutron's one-page sheet of auxiliary views at scale 1/5, page 1, with a second scale of 1/6 printed. Lutron prints no issue date and publishes the sheet as DWG and DXF files.
Which revision of 085691 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which wood blinds does 085691 cover?
Lutron Triathlon wood blinds.
Does Lutron recommend butt and pass at a corner?
No. Lutron document 085691 says butt and pass is not recommended for corner mounting. Lutron tells the reader to use corner to corner instead.
What deduction and light gap does the detail give?
Lutron document 085691 prints a measurement deduction of 4.6875 in, with a metric figure beside it that does not match.
- Metric printed beside the deduction: 19 mm
- Light gap: 2.5625 in (65 mm)
Check the deduction against the PDF before ordering.
In what order are butt and pass blinds installed?
Lutron document 085691 has blind 1 fully in place before the brackets for blind 2 are fixed. Lutron gives the reason: the blind 2 brackets get in the way of fitting or removing blind 1.
Where are the detailed mounting requirements for a butt and pass corner?
Lutron document 085691 refers the reader to the section drawing for detailed mounting requirements and prints no fixing details itself. The wood blind section views are Lutron documents 085676 to 085682.
Why might a designer avoid butt and pass at a corner?
Lutron document 085691 warns that the blind 2 brackets interfere with taking blind 1 down. Lutron names corner to corner as the arrangement to use instead.
Other Triathlon CAD drawings
CAD drawings for the same Triathlon system:
All 18 Triathlon CAD drawingsDocuments used with 085691
Lutron document 085692 is the corner to corner detail, the arrangement this sheet's own note tells the reader to use. Lutron documents 085676 to 085679 are the inside mount section views, and 085680 to 085682 the outside mount views.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085665Serena and Wood Blinds Specification Submittal | Specification Submittal | F | Aug 2025 |
| 3682573Serena Honeycomb and Wood Blinds Stack Specification Submittal | Specification Submittal | L | Jan 2022 |
| 045848Serena & Wood Blinds – Drive Replacement Instructions Installation Guide | Installation Guide | A | Apr 2020 |
| 045836Serena and Wood Blinds Installation Guide | Installation Guide | F | Mar 2025 |
| 085276Serena 10 Output Power Panel Power Supply (12 V) Specification Submittal | Specification Submittal | C | May 2016 |
| 085283Serena Individual Plug-In Power Supply Specification Submittal | Specification Submittal | D | Nov 2018 |
| Serena Application Note: Blink Codes | Application Note | ||
| 048561Serena Application Note: Optimizing Battery Life in Shades | Application Note | F | Oct 2024 |
| 3672208Product Brochure: Shading Solutions | Product Brochure | M | Dec 2020 |
| 3672855Wood Blinds Product Brochure: Battery-Powered | Product Brochure | B |
Revisions of 085691
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085691, and what to read next
Lutron document 085691 gives no bracket positions, fixing sizes or section through the head.
Publisher and citation for document 085691
Lutron Electronics Co., Inc. publishes document 085691, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron, Triathlon and Serena are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Triathlon?
New Way supplies and installs Lutron Triathlon shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085691 filled in.
