You searched and this document matched it.
See all resultsCAD Drawing · English · PDF, DWG, DXF
Lutron Serena Honeycomb Shades CAD Drawing: Wall Mount Tilted
Lutron's CAD section of a wall-mounted Serena cellular shade, with a battery access label.
Lutron, Serena Honeycomb Shades CAD Drawing: Wall Mount Tilted. https://assets.lutron.com/a/documents/009-ser-wmtlt-s.pdf, via https://newwaykl.com/resources/lutron/honeycomb-shades/triathlon/lutron-serena-honeycomb-shades-cad-drawing-wall-mount-tilted/
About this Triathlon drawing
Lutron drawing 009-SER-WMTLT-S, copyright 2009, 1/2 scale, is the Serena shade wall mount section listed as Wall Mount Tilted: battery access, wood blocking, glazing and finished ceiling labels, one unlabeled value, the stack height note.
What this Triathlon drawing covers
This Triathlon drawing has these six sections, all on its one page.
- Section through a wall-mounted shade
- Battery access label on the section
- Wood blocking, glazing and finished ceiling labeled
- Ordered shade height and one unlabeled value
- Note on the stack height range
- Title block with number, scale and revision
Specifications in this Triathlon drawing
This Triathlon drawing prints 14 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
Typical section
PDF page 1 of this Triathlon drawing, opens in a new tab- Unlabeled dimension
- 2.50 in (63 mm)
- Label
- Battery access
- Elements labeled
- Wood blocking; glazing (typical); finished ceiling
- Height marked
- Ordered shade height (no figure printed)
- Mount
- Serena cellular shade wall mount
- Range
- 2.5 in to 5 in (inches only)
- Varies with
- Shade height and fabric selection
- Actual height
- Estimated during the online order process
- Drawing series
- Serena cellular shade detail drawing
- Drawing number
- 009-SER-WMTLT-S
- Scale
- 1/2
- Revision
- - (a dash is printed)
- Copyright
- 2009
- Formats published
- PDF (1 page, about 94 KB), DWG, DXF
Facts Lutron states in this Triathlon drawing
The values this Triathlon drawing states, as published:
- Drawing number
- 009-SER-WMTLT-S, printed in the drawing line and the title block
- Header
- Serena cellular shade, wall mount, typical section
- Battery access
- Labeled on the section, with no clearance figure printed for it
- Elements labeled
- Wood blocking, glazing (typical) and finished ceiling
- Printed dimension
- 2.50 in (63 mm), with no label naming what it measures
- Height marked
- Ordered shade height, with no figure printed for it
- Stack height range
- 2.5 in to 5 in, depending on shade height and fabric selection, inches only
- Actual stack height
- Estimated during the online order process, per Lutron's note
- Not labeled
- No trim, spacer or pocket appears among the labels
- Scale, revision and date
- Scale 1/2
- Revision field prints a dash
- Copyright 2009, no issue date
- File formats
- PDF (one page, about 94 KB), DWG and DXF
Questions about this Triathlon drawing
The answers come from this Triathlon drawing and New Way's record of it.
What is Lutron drawing 009-SER-WMTLT-S?
Lutron's one-page Serena cellular shade wall mount section, drawn at 1/2 scale with a 2009 copyright. Lutron's title block prints a dash in the revision field and no issue date.
Which revision of this Triathlon drawing is current?
Lutron publishes this Triathlon drawing without a revision letter. New Way checked it against assets.lutron.com on 16 October 2026.
Which honeycomb shades does this Triathlon drawing cover?
Lutron Triathlon honeycomb shades.
Does the wall mount need blocking?
Lutron labels wood blocking on drawing 009-SER-WMTLT-S. The sheet gives no size, grade or fixing for the blocking.
What is the 2.50 in (63 mm) value?
Lutron prints 2.50 in (63 mm) on drawing 009-SER-WMTLT-S without a label naming what it measures. The dimension line in the PDF or DWG shows the two points it spans.
Does the drawing explain how to reach the batteries?
Lutron labels battery access on the section of drawing 009-SER-WMTLT-S. The sheet prints no clearance figure and no steps for the battery change.
How much stack height should a wall-mounted Serena shade allow?
Lutron's note on drawing 009-SER-WMTLT-S puts the stack height between 2.5 in and 5 in. Shade height and fabric selection set where it falls.
Lutron estimates the actual figure during the online order process.
Is a DWG or DXF available for the wall mount section?
Lutron publishes drawing 009-SER-WMTLT-S as a one-page PDF of about 94 KB and as DWG and DXF files.
Other Triathlon CAD drawings
CAD drawings for the same Triathlon system:
All 19 Triathlon CAD drawingsDocuments used with this Triathlon drawing
Lutron drawing 009-SER-WMTLT-S is the wall mount section without trim; the sections with trim are 004-SER-WMT-E and 006-SER-WMTLT-E. Lutron's inside mount pair is 001-SER-INSMT-S and 003-SER-INSTLT-S, and installation guide 045830 covers the shade.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045830Serena Insulating Honeycomb Shade Installation Guide | Installation Guide | B | Oct 2020 |
| 085745Serena and Architectural Honeycomb Shades Specification Submittal | Specification Submittal | F | Sep 2023 |
| 085300Serena Cable-Guided Insulating Honeycomb Shades Specification Submittal | Specification Submittal | A | May 2013 |
| 045902Serena and Architectural Honeycomb Shades Installation Guide | Installation Guide | A | Feb 2022 |
| 045836Serena and Wood Blinds Installation Guide | Installation Guide | F | Mar 2025 |
| Honeycomb Shades Revit Family: Insulating | Revit Family | ||
| 085276Serena 10 Output Power Panel Power Supply (12 V) Specification Submittal | Specification Submittal | C | May 2016 |
| 085283Serena Individual Plug-In Power Supply Specification Submittal | Specification Submittal | D | Nov 2018 |
| Serena Application Note: Blink Codes | Application Note | ||
| 048561Serena Application Note: Optimizing Battery Life in Shades | Application Note | F | Oct 2024 |
Not covered in this Triathlon drawing, and what to read next
Lutron drawing 009-SER-WMTLT-S prints no trim, spacer, blocking size, fixing or battery change steps.
- With trim: 004-SER-WMT-E, the wall mount with trim spacer section drawing
- Mounting: 045830, the Serena and Triathlon honeycomb shade installation guide
Publisher and citation for this Triathlon drawing
Lutron Electronics Co., Inc. publishes this document and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron, Triathlon and Serena are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Triathlon?
New Way supplies and installs Lutron Triathlon shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
