Contact Us
Opens in a new tab

3684408 · Product Brochure · Rev C · Dec 2023 · English · PDF, 3 pages, 0.6 MB

Lutron Triathlon Honeycomb Shades Product Brochure: Shade Selection Guide (3684408, rev C)

Lutron's Triathlon Shades Selection Guide, the order worksheet for one window's honeycomb or roller shade.

About document 3684408

Lutron document 3684408, Rev C of December 2023, is the three-page Triathlon selection worksheet: shade style, power, control, mount with measurements, fabric, above-trim clearance, maximum widths, full-recess projections and two honeycomb enhancements.

What brochure 3684408 covers

Lutron document 3684408 has these eight sections. Each link opens the PDF at that page in a new tab.

  1. Step 1: select shade style, opens in a new tab page 1
  2. Step 2: select power, opens in a new tab page 1
  3. Step 3: select control, opens in a new tab page 2
  4. Step 4: select shade mount and measurements, opens in a new tab page 2
  5. Honeycomb shade projection for a full-recess inside mount, opens in a new tab page 2
  6. Step 5: select fabric, opens in a new tab page 3
  7. Optional enhancements for honeycomb shades, opens in a new tab page 3
  8. Roller shade projection for a full-recess inside mount, opens in a new tab page 3

Specifications in 3684408

Lutron document 3684408 prints 28 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.

Honeycomb styles
Standard; Architectural
Roller roll direction
Regular roll, fabric closest to the glass (standard); reverse roll, fabric farthest from the glass
Reverse roll
Not available with fascia
Roller top treatment
Headrail without fascia; fabric-wrapped fascia (regular roll only); architectural fascia (regular roll only)
Power options
Battery-powered; plug-in; power panel; manual shade
Control options
Pico remote (standalone); Caséta system; RadioRA 3 system; HomeWorks system

Step 4 Select Shade Mount and Measurements

PDF page 2 of 3684408, opens in a new tab
Inside mount width
Readings A, B and C; smallest width recorded, in/mm
Inside mount height
Readings D, E and F; smallest height recorded, in/mm
Outside mount width
Width of the area the fabric is to cover, in/mm
Outside mount height
Top of the headrail to the window sill, in/mm
Above-trim spacers
Included; clear trim up to 1/2 in (13 mm) thick
Above-trim headrail height, Standard and Architectural honeycomb
At least 3 1/8 in (80 mm) above the top edge of the window trim
Above-trim headrail height, roller
At least 4 1/2 in (114 mm) above the top edge of the window trim
Maximum width, Standard or Architectural honeycomb
96 in (2,438 mm)
Maximum width, roller
108 in (2,743 mm)
Maximum width, WIDR roller
144 in (3,657 mm)

Honeycomb shade projection: full-recess depth for inside mount

PDF page 2 of 3684408, opens in a new tab
Battery powered, Tap 'n' Tilt brackets
2 1/2 in (64 mm)
Manual shade, stationary brackets
2 in (51 mm)

Roller shade projection: full-recess depth for inside mount

PDF page 3 of 3684408, opens in a new tab
Without fascia, battery powered
3 in (76 mm), maximum projection
Without fascia, wired power
3 in (76 mm), maximum projection
Without fascia, cordless manual
3 in (76 mm), maximum projection
Without fascia, basis
Varies with the fabric roll-up; shown for the largest available fabric panel height
Fabric-wrapped fascia
3 3/8 in (86 mm)
Architectural fascia
3 3/8 in (86 mm)
Fabric
Fabric part number from the fabric binders

Optional Enhancements for Honeycomb Shade

PDF page 3 of 3684408, opens in a new tab
Back cover
Standard honeycomb shade; typically room-darkening inside mounts
Cable-guided
Outside mount only; for a shade mounted on a door
Cable-guided anchor and hardware colors
Snow; Biscuit; Sienna

Facts Lutron states in 3684408

The values Lutron document 3684408 states, as published:

Honeycomb styles
Standard or Architectural
Roller top treatments
Headrail with no fascia, a fabric-wrapped fascia or an architectural fascia
Regular roll
Standard, with the fabric closest to the glass
Reverse roll
Fabric farthest from the glass, to clear door or window hardware. Not available with a fascia.
Fascia and roll
Both the fabric-wrapped and the architectural fascia come in regular roll only
Power choices
Battery-powered, plug-in, power panel or manual shade
Control choices
Pico remote (standalone), Caséta system, RadioRA 3 system or HomeWorks system
Inside mount measurements
Three width readings (A, B, C) and three height readings (D, E, F). The smallest width and the smallest height are recorded in inches or millimeters.
Outside mount measurements
Width is the area the fabric should cover. Height runs from the top of the headrail to the sill, on trim or above trim.
Above-trim mount clearance
Top of the headrail at least this far above the top edge of the trim:
  • Standard or architectural honeycomb: 3 1/8 in (80 mm)
  • Roller: 4 1/2 in (114 mm)
  • Included spacers clear trim up to 1/2 in (13 mm) thick
Maximum width
  • Standard or architectural honeycomb: 96 in (2,438 mm)
  • Roller: 108 in (2,743 mm)
  • WIDR roller: 144 in (3,657 mm)
Honeycomb projection, battery
2 1/2 in (64 mm) on Tap 'n' Tilt brackets, full recess
Honeycomb projection, manual
2 in (51 mm) on stationary brackets, full recess
Roller projection, no fascia
3 in (76 mm) for battery, wired and cordless manual shades, the maximum for the largest fabric panel height
Roller projection, fascia
3 3/8 in (86 mm) with a fabric-wrapped or architectural fascia
Back cover
A cover on the back of a standard honeycomb headrail blocks light through the mounting area. Typical use: room-darkening inside mounts.
Cable-guided option
Outside mount only, for a shade mounted on a door. Anchor and hardware in Snow, Biscuit or Sienna.

Questions about document 3684408

The answers come from Lutron document 3684408 and New Way's record of it.

What is Lutron document 3684408?

Lutron's three-page fill-in worksheet, copyright 12/2023 under P/N 368-4408 Rev C, listed as a product brochure. The worksheet notes that options can vary with the application and availability is subject to change.

Which revision of 3684408 is current?

Rev C, dated December 2023, is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.

Which honeycomb shades does 3684408 cover?

Lutron Triathlon honeycomb shades.

What is the maximum width of a Triathlon shade?

Up to 144 in (3,657 mm) on a WIDR roller shade, per Lutron document 3684408.

  • Standard or architectural honeycomb: 96 in (2,438 mm)
  • Roller: 108 in (2,743 mm)
  • WIDR roller: 144 in (3,657 mm)

How deep must a recess be to hide the shade fully?

Lutron document 3684408 gives the full-recess projection by shade type.

  • Honeycomb: 2 1/2 in (64 mm) battery-powered, 2 in (51 mm) manual
  • Roller without fascia: 3 in (76 mm), a maximum that varies with fabric roll-up
  • Roller with fabric-wrapped or architectural fascia: 3 3/8 in (86 mm)

How far above the trim does an above-trim mount sit?

At least 3 1/8 in (80 mm) above the trim's top edge for standard and architectural honeycomb shades, per Lutron document 3684408.

  • Roller shades: at least 4 1/2 in (114 mm)
  • Supplied spacers clear trim up to 1/2 in (13 mm) thick

How are inside-mount measurements recorded on the worksheet?

Lutron document 3684408 asks for three width readings, A to C, and three height readings, D to F. The smallest width and the smallest height go on the order, in inches or millimeters.

Lutron document 3684408 also asks the measurer to check the chosen shade type's projection when a full recess is wanted.

When is reverse roll chosen and what does it rule out?

Lutron document 3684408 places the fabric farthest from the glass on a reverse roll, to clear door or window hardware. Reverse roll is not available with a fascia; both fascia styles come in regular roll only.

Ask about 3684408

Other Triathlon brochures

Brochures for the same Triathlon system:

All 2 Triathlon brochures

Documents used with 3684408

Lutron document 3672208 is the Triathlon product brochure and 085333 the Triathlon roller shades specification submittal. Lutron document 048598 is the application note on measuring for shades.

Revisions of 3684408

This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.

RevisionDateStatus
CDec 2023Current. The file on assets.lutron.com. Checked 16 Oct 2026.

Not covered in 3684408, and what to read next

Lutron document 3684408 gives no fabric data, installation steps or wiring.

  • Product data: 085333, the Triathlon roller shades specification submittal
  • Measuring: 048598, the measuring for shades application note

Publisher and citation for document 3684408

Lutron Electronics Co., Inc. publishes document 3684408, Rev C, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.

Lutron and Triathlon are trademarks of Lutron Electronics Co., Inc.

Reviewed by Edmond Hong, Technical Specialist, New Way.

Specifying Triathlon?

New Way supplies and installs Lutron Triathlon shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.

The form opens with document 3684408 filled in.