Contact Us
Opens in a new tab

085333 · Specification Submittal · Rev B · English · PDF, 5 pages, 1.3 MB

Lutron Triathlon Roller Shades Specification Submittal (085333)

Lutron's specification submittal for Sivoia QS Triathlon WIDR roller shades, battery-powered or wired, with ClearConnect RF control built in.

About document 085333

Lutron document 085333, Rev b of August 2016, is the Triathlon WIDR roller shade specification submittal: drive ratings, noise, wireless range, environment, compatible controls, profile drawings, three mounting options and three power options.

What submittal 085333 covers

Lutron document 085333 has these nine sections. Each link opens the PDF at that page in a new tab.

  1. Features, opens in a new tab page 1
  2. Regulatory listings, opens in a new tab page 1
  3. Ratings of the electronic drive unit, opens in a new tab page 1
  4. Environment, opens in a new tab page 1
  5. Compatible controls, opens in a new tab page 1
  6. Back cover and shade profile without fascia, opens in a new tab page 2
  7. Shade profile with optional architectural or fabric-wrapped fascia, opens in a new tab page 3
  8. Mounting options, opens in a new tab page 4
  9. Power options, opens in a new tab page 5

Specifications in 085333

Lutron document 085333 prints 46 values in the groups the document uses, each with the document's unit. A row names the catalog codes it applies to. The page link beside each group opens the PDF where the group starts.

Power models
Battery-powered and wired power
Battery life, battery-powered models
2 to 5 years
Sound
38 dBA measured 3 ft (1 m) from the drive
Stopping interval
0.125 in (3 mm) throughout the travel
Wireless communication
ClearConnect RF, built in
Wireless control range
30 ft (9 m)
Listing
cULus listed (E135084)
Approvals
FCC (USA), IC (Canada), CFT (Mexico)

Ratings (Electronic Drive Unit)

PDF page 1 of 085333, opens in a new tab
Operating voltage
6 to 12 V DC
Operating wattage
5 W
Torque
2.0 in-lb
Speed
3.6 in/sec
Temperature
32 °F to 104 °F (0 °C to 40 °C)
Use
Indoor use only
Relative humidity
Below 90%, non-condensing
Dimensions printed on the profile (unlabelled)
3.00 in (76 mm); 2.70 in (69 mm)
Total projection
Varies with shade height and fabric roll-up; maximum 4.000 in (102 mm)
Dimensions printed on the profile (unlabelled)
4.36 in (111 mm); 3.30 in (84 mm)

Shade with Optional Architectural Fascia

PDF page 3 of 085333, opens in a new tab
Dimensions printed on the profile (unlabelled)
4.94 in (125 mm); 4.50 in (114 mm)

Shade with Optional Fabric Wrapped Fascia

PDF page 3 of 085333, opens in a new tab
Dimensions printed on the profile (unlabelled)
4.94 in (125 mm); 4.50 in (114 mm)
Width
20.5 in (546 mm) to 144 in (3658 mm); smallest of top, center and bottom opening widths supplied
Height
Top of the mounted back cover to the lower limit, typically the sill
Jamb depth to fully recess, without fascia
4 in (102 mm) minimum
Jamb depth to fully recess, with fascia
4.5 in (114 mm) minimum
Width
20.5 in (546 mm) to 144 in (3658 mm)
Height
Top of the mounted back cover to the lower limit, typically the sill
Width
20.5 in (546 mm) to 144 in (3658 mm)
Top of back cover above top of trim, without spacing off the wall
5 1/4 in (133 mm) minimum
Optional fascia with reverse roll
Not available
Input voltage
120 to 240 V~Models: CSPS-P1-10-6
Maximum input current
1.5 AModels: CSPS-P1-10-6
Operating frequency
50/60 HzModels: CSPS-P1-10-6
Output voltage
12 VModels: CSPS-P1-10-6
Output current
5 AModels: CSPS-P1-10-6
ESD protection
Plus or minus 16 kVModels: CSPS-P1-10-6
Power outputs
Up to 10Models: CSPS-P1-10-6
Secondary wiring
Type CL2, CL2P, CL2R, CL2X or equivalent cable to local and national codeModels: CSPS-P1-10-6
Cord
12 in (305 mm) with barrel connector; available separatelyModels: CSPS-P1-1-6-WH, CSPS-P2-1-6-WH, CSPS-P3-1-6-WH
Power wire supplied with wired shades
15 ft (4.5 m)
Battery type
D-cell alkaline, not included
Shade width 20 1/2 in (521 mm) to 25 15/16 in (659 mm)
6 D-cell; no Battery Boost option
Shade width 26 in (660 mm) to 37 9/16 in (954 mm)
8 D-cell; no Battery Boost option
Shade width 37 5/8 in (956 mm) to 47 1/16 in (1195 mm)
8 D-cell; 12 D-cell with Battery Boost
Shade width 47 1/8 in (1197 mm) to 144 in (3658 mm)
8 D-cell; 16 D-cell with Battery Boost
Threshold tolerance for other mount and fascia combinations
Plus or minus 1/4 in (6 mm)
Wired power recommended
Buildings with 20 or more Lutron Radio Powr Savr sensors

Facts Lutron states in 085333

The values Lutron document 085333 states, as published:

Power models
Battery-powered and wired power models, with a 2 to 5 year battery life stated for the battery models
Noise and precision
38 dBA measured 3 ft (1 m) from the drive, which stops at 0.125 in (3 mm) intervals through the full travel
Wireless range
30 ft (9 m) using ClearConnect RF technology
Drive ratings
Operating voltage 6 to 12 V DC, operating wattage 5 W, torque 2.0 in-lb, speed 3.6 in/sec
Environment
32 °F to 104 °F (0 °C to 40 °C), indoor use only, relative humidity below 90% non-condensing
Regulatory
cULus listed (E135084), FCC (USA), IC (Canada), CFT (Mexico)
Shade width range
20.5 in (546 mm) to 144 in (3658 mm) for inside mount, outside mount on trim and outside mount above trim
Recess depth, inside mount
Fully recessed inside mount
  • At least 4 in (102 mm) without fascia
  • At least 4.5 in (114 mm) with the optional fascia
  • Projection without fascia varies with roll-up, peaking at 4.000 in (102 mm)
Outside mount above trim
Back cover top at least 5 1/4 in (133 mm) above the trim top, when the back cover is not spaced off the wall
Wired power
  • 10-output power panel CSPS-P1-10-6, 120 to 240 V~ input
  • Panel output 12 V 5 A
  • Plug-in supplies: CSPS-P1-1-6-WH, CSPS-P2-1-6-WH, CSPS-P3-1-6-WH
  • Wired shades ship with a 15 ft (4.5 m) power wire
Batteries by shade width
D-cell alkaline, not included, counted by shade width for an outside mount without fascia
  • 6 cells up to 25 15/16 in (659 mm)
  • 8 cells from 26 in (660 mm)
  • Battery Boost: 12 cells from 37 5/8 in (956 mm)
  • Battery Boost: 16 cells from 47 1/8 in (1197 mm)
Wired power recommendation
Lutron recommends wired power in buildings with 20 or more Lutron Radio Powr Savr sensors

Questions about document 085333

The answers come from Lutron document 085333 and New Way's record of it.

What is Lutron document 085333?

Lutron's 5-page Triathlon WIDR submittal, dated 29 August 2016 on every page.

  • Profile drawings: back cover, shade without fascia, shade with fascia
  • Mounts: inside, outside on trim, outside above trim
  • Power: 10-output panel, plug-in supply or D-cell batteries by width

Which revision of 085333 is current?

Rev B is the revision Lutron publishes. New Way checked it against assets.lutron.com on 15 October 2026.

Which roller shades does 085333 cover?

Lutron Triathlon roller shades.

How wide can a Triathlon WIDR roller shade be made?

Lutron document 085333 gives a width range of 20.5 in (546 mm) to 144 in (3658 mm) for all three mounts.

For an inside mount the opening is measured at the top, center and bottom. The smallest figure is supplied, and Lutron works out the shade width from it.

Which controls work with the shade?

Lutron document 085333 lists these compatible controls, with the built-in ClearConnect RF range rated at 30 ft (9 m).

  • Pico wireless control, Lutron Shading Solutions 4-Group RF remote
  • seeTouch RF keypads, GRAFIK Eye QS, RadioRA 2, HomeWorks QS
  • Caséta Wireless Smart Bridge Pro

How deep must a recess be to hide the shade?

Lutron document 085333 asks for a jamb at least 4 in (102 mm) deep without a fascia, allowing for the largest fabric roll.

With the optional fascia fitted, the jamb must be at least 4.5 in (114 mm) deep.

How many batteries does a battery-powered shade need?

Lutron document 085333 tables D-cell alkaline counts by width, with a Battery Boost second holder offered above 37 5/8 in (956 mm).

  • 6 cells up to 25 15/16 in (659 mm)
  • 8 cells from 26 in (660 mm)
  • Battery Boost: 12 cells, or 16 cells from 47 1/8 in (1197 mm)

Which fascia options does the shade offer?

Lutron document 085333 shows the shade without a fascia, with an optional architectural fascia and with an optional fabric-wrapped fascia. Lutron document 085333 notes the optional fascia cannot be combined with reverse roll.

Ask about 085333

Other Triathlon specification submittals

Specification submittals for the same Triathlon system:

All 8 Triathlon specification submittals

Documents used with 085333

Lutron document 045662 is the drive replacement guide for the same shade, and 045507 the Triathlon setup and operation guide.

Revisions of 085333

This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.

RevisionDateStatus
BNot statedCurrent. The file on assets.lutron.com. Checked 15 Oct 2026.

Not covered in 085333, and what to read next

Lutron document 085333 gives no mounting steps or programming; its wiring content is one panel diagram and a cable note.

  • Installation: 045612, the Triathlon WIDR roller shade installation guide
  • Fascia: 045583, the WIDR architectural fascia installation guide

Publisher and citation for document 085333

Lutron Electronics Co., Inc. publishes document 085333, Rev B, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 15 October 2026.

Lutron, Sivoia QS and Triathlon are trademarks of Lutron Electronics Co., Inc.

Reviewed by Edmond Hong, Technical Specialist, New Way.

Specifying Triathlon?

New Way supplies and installs Lutron Triathlon shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.

The form opens with document 085333 filled in.