You searched and this document matched it.
See all resultsCAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Tension Shades and Skylights CAD Drawing: Skylight, Recessed Mount (Length)
Lutron's tensioned roller detail of the Sivoia QS skylight shade on a recessed mount, drawn for the length at 1/4.
Lutron, Sivoia QS Tension Shades and Skylights CAD Drawing: Skylight, Recessed Mount. https://assets.lutron.com/a/documents/0091-sktr-rmt-s.pdf, via https://newwaykl.com/resources/lutron/tension-shades-and-skylights/sivoia-qs/lutron-sivoia-qs-tension-shades-and-skylights-cad-drawing-skylight-recessed-mount-length/
About this Sivoia QS drawing
Lutron drawing 0091-SKTR-RMT-S, revision A, is a typical section with the skylight, finished skylight well and finished ceiling labeled, giving a 5.00 in (127 mm) shade recess and 38.52 in (978 mm) minimum recess length.
What this Sivoia QS drawing covers
This Sivoia QS drawing has these ten sections.
- Heading: tensioned roller detail
- Title block: skylight, recessed mount (length)
- Drawing 0091-SKTR-RMT-S, revision A, scale 1/4
- View 1, typical section at scale 1/4
- Break line shortening the drawn length
- Skylight and finished skylight well
- Finished ceiling
- Shade recess, 5.00 in (127 mm)
- Shade recess length, 38.52 in (978 mm) minimum
- Five dimensions without a label
Specifications in this Sivoia QS drawing
This Sivoia QS drawing prints eight values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Shade recess
- 5.00 in (127 mm)
- Shade recess length, minimum length
- 38.52 in (978 mm)
- dimension without a label, top right of the section
- 0.13 in (3 mm)
- dimension without a label, upper right of the section
- 4.64 in (118 mm)
- dimension without a label, upper center of the section
- 4.75 in (121 mm)
- dimension without a label, lower right of the section
- 2.25 in (57 mm)
- dimension without a label, bottom right of the section
- 4.77 in (121 mm)
- Scale
- 1/4
Facts Lutron states in this Sivoia QS drawing
The values this Sivoia QS drawing states, as published:
- Drawing number and revision
- 0091-SKTR-RMT-S, revision A, printed in the title block
- Sheet title
- Tensioned roller detail: skylight, recessed mount (length)
- View and scale
- View 1, typical section, scale 1/4
- Shade recess
- 5.00 in (127 mm)
- Shade recess length
- 38.52 in (978 mm), labeled minimum length
- Dimensions without a label
- 0.13 in (3 mm), top right of the section
- 4.64 in (118 mm), upper right
- 4.75 in (121 mm), upper center
- 2.25 in (57 mm), lower right
- 4.77 in (121 mm), bottom right
- Labeled parts
- Skylight, finished skylight well and finished ceiling
- File formats
- PDF (one page, about 245 KB), DWG and DXF
- Date
- Copyright 2009 in the title block
Questions about this Sivoia QS drawing
The answers come from this Sivoia QS drawing and New Way's record of it.
What is this Sivoia QS drawing?
Lutron's tensioned roller detail of the Sivoia QS skylight shade on a recessed mount, drawn for the length at 1/4. Lutron drawing 0091-SKTR-RMT-S, revision A, is a typical section with the skylight, finished skylight well and finished ceiling labeled, giving a 5.00 in (127 mm) shade recess and 38.52 in (978 mm) minimum recess length.
Which revision of this Sivoia QS drawing is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which tension shades and skylights does this Sivoia QS drawing cover?
Lutron Sivoia QS tension shades and skylights.
What does Lutron drawing 0091-SKTR-RMT-S show?
Lutron's view 1 is the length section, drawn with a break line, as one page in PDF, DWG and DXF. Lutron prints five dimensions without a label beside the two labeled recess values.
How large a recess does Lutron draw for the skylight shade?
Lutron labels a shade recess of 5.00 in (127 mm) and a minimum shade recess length of 38.52 in (978 mm) on drawing 0091-SKTR-RMT-S.
Which dimensions on the section carry no label?
Lutron prints five dimensions without naming them, so read each against the drawing itself.
- 0.13 in (3 mm) top right, 4.64 in (118 mm) upper right
- 4.75 in (121 mm) upper center
- 2.25 in (57 mm) lower right, 4.77 in (121 mm) bottom right
Where is the width drawing of the same mount?
The width drawing of the skylight recessed mount is 0092-SKTR-RMT-S, a Sivoia QS skylight CAD drawing.
Which documents go with this Sivoia QS drawing?
Three documents go with this Sivoia QS drawing, listed under Documents used with this Sivoia QS drawing with the others:
Other Sivoia QS CAD drawings
CAD drawings for the same Sivoia QS system:
All 15 Sivoia QS CAD drawingsDocuments used with this Sivoia QS drawing
Lutron drawing 0091-SKTR-RMT-S pairs with 0092-SKTR-RMT-S, the width drawing, and 0097-SKTR-SYS-V, the frame product views. Lutron's inside, recessed flush and surface mounts are 0089-SKTR-IMT-S and 0090-SKTR-IMT-S, 0093-SKTR-FMT-S and 0094-SKTR-FMT-S, 0095-SKTR-SMT-S and 0096-SKTR-SMT-S.
| Document | Type | Revision | Date |
|---|---|---|---|
| 086130Tension Shades and Skylights Specification Submittal | Specification Submittal | A | Feb 2026 |
| 045156Tension Shades and Skylights Installation Guide | Installation Guide | B | |
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 3671530Tension Shades and Skylights Product Brochure: Tensioned Roller Shades | Product Brochure | I | May 2016 |
| 3683231Application Note: Care and Maintenance of Window Treatments | Application Note | C | |
| Performance Specification: Section 086710, Skylight Shades | Performance Specification | ||
| 3671319Product Brochure: Residential Shading Solutions | Product Brochure | K | Feb 2023 |
Revisions of this Sivoia QS drawing
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in this Sivoia QS drawing, and what to read next
Lutron drawing 0091-SKTR-RMT-S shows the length section only: no width direction, no fasteners and no control wiring.
Publisher and citation for this Sivoia QS drawing
Lutron Electronics Co., Inc. publishes this document and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
