Lutron Alena Drapery CAD Drawing: Ceiling-Mount, Section View (085807)

Facts Lutron states in 085807

The values Lutron document 085807 states, as published:

Drawing number and revision

085807, revision B on all eight sheets, no issue date printed

Minimum track width

24 in (610 mm) for center draw and side draw, 48 in (1219 mm) for tandem

Bracket spacing

• Camlock brackets 16 to 24 in (407 to 610 mm) bracket to bracket
• 4 to 8 in (102 to 203 mm) from the end of the track
• 6 to 8 in (152 to 203 mm) from a splice center

Minimum clearance from the wall

3.50 in (89 mm), on both plans

Minimum clearance between tracks

5.50 in (140 mm), on the dual plan

Minimum dimensions on the sections

3.50 in (89 mm) on both sections and 5.50 in (140 mm) on the dual section

Track width

1.3 in (33 mm), on both sections

Bracket width

3.73 in (95 mm) on the dual section, printed as 3.73 in [45 mm] on the single section

Track height with mounting bracket

• Single section: 1.1 in (28 mm) and 10.6 in (270 mm)
• Dual section: 10.6 in (270 mm)

Electronic drive unit (EDU)

Slim orientation on every elevation, with 10.6 in (270 mm) and 2.1 in (53 mm) printed on it unlabeled

EDU rail box length

3.65 in (93 mm), on both plans

Idler length

3.20 in (81 mm) on the single plan, 3.22 in (82 mm) on the dual plan

Unlabeled dimensions

• 2.72 in (69 mm) on every elevation
• 3.30 in (84 mm) on both sections
• 1.64 in (42 mm), 3.73 in (95 mm) and 2.36 in (60 mm) on both plans

Second tandem track

Mirror the track about the marked edge, on both plans

Scale

Elevations 1/4, single-track plan 1/5, dual-track plan 1/4, sections 1/2

Factory-supplied track

Fitted to the drawing, clears typical fabric panels

Installer responsibility

Keeping the clearances right for the fabric panels actually chosen