You searched and this document matched it.
See all results086118 · Specification Submittal · Rev B · May 2017 · English · PDF, 2 pages, 0.1 MB
Lutron Sivoia QS Drapery Specification Submittal: D145 System, Capacity (086118, rev B)
Lutron's capacity specification for the Sivoia QS D145 drapery track: panel weight by width for the D145 drive.
Lutron 086118 Rev B (May 2017), Sivoia QS Drapery Specification Submittal: D145 System, Capacity. https://assets.lutron.com/a/documents/086118.pdf, via https://newwaykl.com/resources/lutron/drapery/sivoia-qs/lutron-sivoia-qs-drapery-specification-submittal-086118/
About document 086118
Lutron document 086118, Rev B of May 2017, is the D145 track capacity specification: the 145 lbs (66 kg) rating, ripplefold and pinch pleat charts for straight and curved track, fullness and curve limits.
What submittal 086118 covers
Lutron document 086118 has these five sections. Each link opens the PDF at that page in a new tab.
Specifications in 086118
Lutron document 086118 prints 31 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Maximum drapery weight
- Up to 145 lbs (66 kg), per the capacity charts
- Operating types
- Sivoia QS Wireless and Sivoia QS
- Track configurations
- Single, dual, tandem and dual-tandem
- Pleat styles
- Pinch pleat or ripplefold panels
- Curved tracks
- Available; conditions, limits and ordering in the curved drapery track template construction guide
Ripplefold capacity, straight track
PDF page 2 of 086118, opens in a new tab- 24 in to 32 in (610 mm to 813 mm)
- Straight track 30 lbs (13.6 kg)
- 32 in to 44 in (813 mm to 1118 mm)
- Straight track 40 lbs (18.1 kg)
- 44 in to 56 in (1118 mm to 1422 mm)
- Straight track 55 lbs (24.9 kg)
- 56 in to 68 in (1422 mm to 1727 mm)
- Straight track 70 lbs (31.8 kg)
- 68 in to 84 in (1727 mm to 2134 mm)
- Straight track 85 lbs (38.6 kg)
- 84 in to 108 in (2134 mm to 2743 mm)
- Straight track 105 lbs (47.6 kg)
- 108 in to 132 in (2743 mm to 3353 mm)
- Straight track 140 lbs (63.5 kg)
- 132 in to 168 in (3353 mm to 4267 mm)
- Straight track 125 lbs (56.7 kg)
- 168 in to 216 in (4267 mm to 5486 mm)
- Straight track 90 lbs (40.8 kg)
Pinch pleat capacity
PDF page 2 of 086118, opens in a new tab- 24 in to 32 in (610 mm to 813 mm)
- Straight track 20 lbs (9.1 kg); curved track with 1 bend not available; curved track with 2 bends not available
- 32 in to 44 in (813 mm to 1118 mm)
- Straight track 30 lbs (13.6 kg); curved track with 1 bend 30 lbs (13.6 kg); curved track with 2 bends not available
- 44 in to 56 in (1118 mm to 1422 mm)
- Straight track 40 lbs (18.1 kg); curved track with 1 bend 40 lbs (18.1 kg); curved track with 2 bends not available
- 56 in to 68 in (1422 mm to 1727 mm)
- Straight track 55 lbs (24.9 kg); curved track with 1 bend 55 lbs (24.9 kg); curved track with 2 bends 40 lbs (18.1 kg)
- 68 in to 84 in (1727 mm to 2134 mm)
- Straight track 65 lbs (29.5 kg); curved track with 1 bend 65 lbs (29.5 kg); curved track with 2 bends 45 lbs (20.4 kg)
- 84 in to 108 in (2134 mm to 2743 mm)
- Straight track 80 lbs (36.3 kg); curved track with 1 bend 80 lbs (36.3 kg); curved track with 2 bends 50 lbs (22.7 kg)
- 108 in to 144 in (2473 mm to 3658 mm, as printed)
- Straight track 105 lbs (47.6 kg); curved track with 1 bend 85 lbs (38.6 kg); curved track with 2 bends 50 lbs (22.7 kg)
- 144 in to 180 in (3658 mm to 4572 mm)
- Straight track 145 lbs (65.8 kg); curved track with 1 bend 90 lbs (40.8 kg); curved track with 2 bends 55 lbs (24.9 kg)
- 180 in to 216 in (4572 mm to 5486 mm)
- Straight track 135 lbs (61.2 kg); curved track with 1 bend 95 lbs (43.1 kg); curved track with 2 bends 55 lbs (24.9 kg)
- 216 in to 252 in (5486 mm to 6401 mm)
- Straight track 120 lbs (54.4 kg); curved track with 1 bend 95 lbs (43.1 kg); curved track with 2 bends 55 lbs (24.9 kg)
- 252 in to 288 in (6401 mm to 7315 mm)
- Straight track 110 lbs (49.9 kg); curved track with 1 bend 95 lbs (43.1 kg); curved track with 2 bends 50 lbs (22.7 kg)
- 288 in to 324 in (7315 mm to 8230 mm)
- Straight track 100 lbs (45.4 kg); curved track with 1 bend 90 lbs (40.8 kg); curved track with 2 bends 50 lbs (22.7 kg)
- 324 in to 360 in (8230 mm to 9144 mm)
- Straight track 90 lbs (40.8 kg); curved track with 1 bend 85 lbs (38.6 kg); curved track with 2 bends 45 lbs (20.4 kg)
- Ripplefold fullness
- 80%, 100% or 120%; not available with curved tracks
- Pinch pleat fullness
- 3:1 for sheer drapes only; 2.5:1 maximum for all other drapes
- Curved radius
- 20 in (0.5 m) or greater
- Inside angle
- 90° tightest; smaller angles not allowed
Facts Lutron states in 086118
The values Lutron document 086118 states, as published:
- Maximum drapery weight
- Up to 145 lbs (66 kg), subject to the capacity charts on page 2.
- Compatibility
- Sivoia QS Wireless and Sivoia QS operating types
- Single, dual, tandem and dual-tandem tracks
- Pinch pleat or ripplefold panels
- Curved track solutions available
- Chart coverage
- Ripplefold on straight track in nine width bands from 24 in to 216 in (610 mm to 5486 mm). Pinch pleat in thirteen bands from 24 in to 360 in (610 mm to 9144 mm) for straight track, one bend and two bends.
- Ripplefold capacity, straight track
- 30 lbs (13.6 kg) at 24 in to 32 in (610 mm to 813 mm)
- Rising to 140 lbs (63.5 kg) at 108 in to 132 in (2743 mm to 3353 mm)
- Then 125 lbs (56.7 kg) at 132 in to 168 in (3353 mm to 4267 mm)
- 90 lbs (40.8 kg) at 168 in to 216 in (4267 mm to 5486 mm), where the chart ends
- Pinch pleat capacity, straight track
- 20 lbs (9.1 kg) at 24 in to 32 in (610 mm to 813 mm)
- Rising to 145 lbs (65.8 kg) at 144 in to 180 in (3658 mm to 4572 mm)
- Falling to 90 lbs (40.8 kg) at 324 in to 360 in (8230 mm to 9144 mm)
- Pinch pleat capacity, curved track
- One bend: 30 lbs (13.6 kg) at 32 in to 44 in (813 mm to 1118 mm)
- One bend peak 95 lbs (43.1 kg) between 180 in and 288 in (4572 mm and 7315 mm)
- Two bends: 40 lbs (18.1 kg) at 56 in to 68 in (1422 mm to 1727 mm)
- Two bends peak 55 lbs (24.9 kg) at 144 in to 252 in (3658 mm to 6401 mm)
- No capacity below 32 in (813 mm), one bend, or 56 in (1422 mm), two bends
- Fullness
- Ripplefold in 80%, 100% or 120% fullness, not available with curved tracks. Pinch pleat fullness of 3:1 is allowed for sheer drapes only. Every other drape stays at 2.5:1 or less.
- Curved track limits
- Curved radius 20 in (0.5 m) or more
- Tightest inside angle 90°, smaller angles not allowed
- Conditions and ordering: the curved drapery track template construction guide
Questions about document 086118
The answers come from Lutron document 086118 and New Way's record of it.
What is Lutron document 086118?
Lutron's two-page D145 capacity sheet, footer 086118b, dated 05.05.17. The charts run ripplefold to 216 in (5486 mm) and pinch pleat to 360 in (9144 mm) in three columns.
Which revision of 086118 is current?
Rev B, dated May 2017, is the revision Lutron publishes. New Way checked it against assets.lutron.com on 15 October 2026.
Which drapery tracks does 086118 cover?
Lutron Sivoia QS drapery tracks.
What is the heaviest drapery a Sivoia QS D145 drive can move?
Lutron document 086118 rates the D145 at up to 145 lbs (66 kg), on straight pinch pleat:
- Peak 145 lbs (65.8 kg) at 144 in to 180 in (3658 mm to 4572 mm)
- 20 lbs (9.1 kg) at 24 in to 32 in (610 mm to 813 mm)
- Lower at every other width and on ripplefold or curved track
How much does a bend in the track reduce the capacity?
Lutron document 086118 shows the drop at 144 in to 180 in (3658 mm to 4572 mm), pinch pleat only.
- Straight track: 145 lbs (65.8 kg)
- One bend: 90 lbs (40.8 kg)
- Two bends: 55 lbs (24.9 kg)
Is ripplefold available on a curved D145 track?
Lutron document 086118 offers ripplefold in 80%, 100% and 120% fullness on straight tracks only. The ripplefold chart stops at 216 in (5486 mm) wide.
What are the limits for a curved D145 drapery track?
Lutron document 086118 requires a curved radius of 20 in (0.5 m) or greater and an inside angle no tighter than 90°.
The sheet refers the reader to the curved drapery track template construction guide for ordering.
Which operating types and track configurations does the D145 system work with?
Lutron document 086118 lists the Sivoia QS Wireless and Sivoia QS operating types. Tracks come single, dual, tandem or dual-tandem, with pinch pleat or ripplefold panels.
Other Sivoia QS specification submittals
Specification submittals for the same Sivoia QS system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 086117Drapery Specification Submittal: D105 System, Capacity | D | May 2026 | |
| 086119Drapery Specification Submittal: D175 System, Capacity | C | Apr 2022 | |
| 086123Drapery Specification Submittal: System (Traditional), Chassis | K | Oct 2025 | |
| 085274Hard Wired Power Supply Specification Submittal | D | Aug 2014 |
Documents used with 086118
Lutron documents 086117 and 086119 are the D105 and D175 capacity sheets; the installation guide is 045982. Lutron document 086118 refers curved track ordering to the curved drapery track template construction guide.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045982Drapery Installation Guide | Installation Guide | A | Sep 2024 |
| 045985Installation Guide: Wireless Drapery Lite System | Installation Guide | A | Nov 2024 |
| 045983Recessed System for Drapery Installation Guide | Installation Guide | A | Sep 2024 |
| 085807Alena Drapery CAD Drawing: Ceiling-Mount, Section View | CAD Drawing | B | |
| 085821Drapery CAD Drawing: All Pinch Pleat Master Carriers, Detail Views | CAD Drawing | A | |
| Drapery Revit Family: Ceiling Mount | Revit Family | ||
| Drapery Revit Family: Dual (Ceiling Mount) | Revit Family | ||
| Drapery Revit Family: Dual (Wall Mount) | Revit Family | ||
| Drapery Revit Family: Standard Curved (Ceiling Mount) | Revit Family | ||
| Drapery Revit Family: Standard Curved (Wall Mount) | Revit Family |
Revisions of 086118
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| B | May 2017 | Current. The file on assets.lutron.com. Checked 15 Oct 2026. |
Not covered in 086118, and what to read next
Lutron document 086118 gives capacity only and carries no mounting, wiring or set-up steps.
Publisher and citation for document 086118
Lutron Electronics Co., Inc. publishes document 086118, Rev B, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 15 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 086118 filled in.
