You searched and this document matched it.
See all results086117 · Specification Submittal · Rev D · May 2026 · English · PDF, 2 pages, 0.2 MB
Lutron Sivoia QS Drapery Specification Submittal: D105 System, Capacity (086117, rev D)
Lutron's capacity specification for the Sivoia QS D105 drapery track: panel weight by width for the D105 and D105-P drives.
Lutron 086117 Rev D (May 2026), Sivoia QS Drapery Specification Submittal: D105 System, Capacity. https://assets.lutron.com/a/documents/086117.pdf, via https://newwaykl.com/resources/lutron/drapery/sivoia-qs/lutron-sivoia-qs-drapery-specification-submittal-086117/
About document 086117
Lutron document 086117, Rev D of May 2026, is the D105 track capacity specification: the 105 lbs (48 kg) rating, ripple fold and pinch pleat charts for straight and curved track, fullness and curve limits.
What submittal 086117 covers
Lutron document 086117 has these five sections. Each link opens the PDF at that page in a new tab.
Specifications in 086117
Lutron document 086117 prints 32 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Maximum drapery weight
- Up to 105 lbs (48 kg), per the capacity charts
- Drive types
- D105 and D105-P; Pull-to-Start only with the D105-P
- Operating types
- Sivoia QS Wireless and Sivoia QS
- Track configurations
- Single, dual, tandem and dual-tandem
- Pleat styles
- Pinch pleat or ripple fold panels
- Curved tracks
- Available; conditions, limitations and ordering in the curved drapery track template construction guide
Ripple fold capacity, straight track
PDF page 2 of 086117, opens in a new tab- 24 in to 32 in (610 mm to 813 mm)
- Straight track 30 lbs (13.6 kg)
- 32 in to 44 in (813 mm to 1118 mm)
- Straight track 40 lbs (18.1 kg)
- 44 in to 56 in (1118 mm to 1422 mm)
- Straight track 55 lbs (24.9 kg)
- 56 in to 68 in (1422 mm to 1727 mm)
- Straight track 70 lbs (31.8 kg)
- 68 in to 108 in (1727 mm to 2743 mm)
- Straight track 85 lbs (38.6 kg)
- 108 in to 156 in (2743 mm to 3962 mm)
- Straight track 65 lbs (29.5 kg)
- 156 in to 180 in (3962 mm to 4572 mm)
- Straight track 40 lbs (18.1 kg)
- 180 in to 216 in (4572 mm to 5486 mm)
- Straight track 10 lbs (4.5 kg) at 80% fullness; 10 lbs (4.5 kg) at 100% fullness; no capacity at 120% fullness
Pinch pleat capacity
PDF page 2 of 086117, opens in a new tab- 24 in to 32 in (610 mm to 813 mm)
- Straight track 20 lbs (9.1 kg); curved track with 1 bend not available
- 32 in to 44 in (813 mm to 1118 mm)
- Straight track 30 lbs (13.6 kg); curved track with 1 bend 30 lbs (13.6 kg)
- 44 in to 56 in (1118 mm to 1422 mm)
- Straight track 40 lbs (18.1 kg); curved track with 1 bend 40 lbs (18.1 kg)
- 56 in to 68 in (1422 mm to 1727 mm)
- Straight track 55 lbs (24.9 kg); curved track with 1 bend 50 lbs (22.7 kg)
- 68 in to 84 in (1727 mm to 2134 mm)
- Straight track 65 lbs (29.5 kg); curved track with 1 bend 50 lbs (22.7 kg)
- 84 in to 108 in (2134 mm to 2743 mm)
- Straight track 80 lbs (36.3 kg); curved track with 1 bend 55 lbs (24.9 kg)
- 108 in to 132 in (2743 mm to 3353 mm)
- Straight track 105 lbs (47.6 kg); curved track with 1 bend 55 lbs (24.9 kg)
- 132 in to 156 in (3353 mm to 3962 mm)
- Straight track 100 lbs (45.4 kg); curved track with 1 bend 60 lbs (27.2 kg)
- 156 in to 216 in (3962 mm to 5486 mm)
- Straight track 80 lbs (36.3 kg); curved track with 1 bend 55 lbs (24.9 kg)
- 216 in to 252 in (5486 mm to 6401 mm)
- Straight track 70 lbs (31.8 kg); curved track with 1 bend 50 lbs (22.7 kg)
- 252 in to 288 in (6401 mm to 7315 mm)
- Straight track 60 lbs (27.2 kg); curved track with 1 bend 45 lbs (20.4 kg)
- 288 in to 324 in (7315 mm to 8230 mm)
- Straight track 50 lbs (22.7 kg); curved track with 1 bend 45 lbs (20.4 kg)
- 324 in to 360 in (8230 mm to 9144 mm)
- Straight track 40 lbs (18.1 kg); curved track with 1 bend 35 lbs (15.9 kg)
- Ripple fold fullness
- 80%, 100% or 120%; not available with curved tracks
- Pinch pleat fullness
- 3:1 for sheer drapes only; 2.5:1 maximum for all other drapes
- Curved radius
- 20 in (0.5 m) or greater
- Inside angle
- 90° tightest; smaller angles not allowed
- D105-P EDU with curved tracks
- Not available
Facts Lutron states in 086117
The values Lutron document 086117 states, as published:
- Maximum drapery weight
- Up to 105 lbs (48 kg), subject to the capacity charts on page 2.
- Drive types
- D105 and D105-P. The Pull-to-Start function is available only with the D105-P.
- Compatibility
- Sivoia QS Wireless and Sivoia QS operating types
- Single, dual, tandem and dual-tandem tracks
- Pinch pleat or ripple fold panels
- Curved track solutions available
- Pull-to-Start panels
- For the master carriers and panel construction that support Pull-to-Start, the sheet refers to the drapery track system specification.
- Chart coverage
- Ripple fold on straight track in eight width bands from 24 in to 216 in (610 mm to 5486 mm). Pinch pleat in thirteen bands from 24 in to 360 in (610 mm to 9144 mm), straight and one bend.
- Ripple fold capacity, straight track
- 30 lbs (13.6 kg) at 24 in to 32 in (610 mm to 813 mm)
- Rising to 85 lbs (38.6 kg) at 68 in to 108 in (1727 mm to 2743 mm)
- Falling to 40 lbs (18.1 kg) at 156 in to 180 in (3962 mm to 4572 mm)
- 180 in to 216 in (4572 mm to 5486 mm): 10 lbs (4.5 kg) at 80% and 100% fullness
- No capacity for 120% fullness at 180 in to 216 in (4572 mm to 5486 mm)
- Pinch pleat capacity, straight track
- 20 lbs (9.1 kg) at 24 in to 32 in (610 mm to 813 mm)
- Rising to 105 lbs (47.6 kg) at 108 in to 132 in (2743 mm to 3353 mm)
- Falling to 40 lbs (18.1 kg) at 324 in to 360 in (8230 mm to 9144 mm)
- Pinch pleat, one bend
- No capacity at 24 in to 32 in (610 mm to 813 mm)
- 30 lbs (13.6 kg) from 32 in to 44 in (813 mm to 1118 mm)
- Peak 60 lbs (27.2 kg) at 132 in to 156 in (3353 mm to 3962 mm)
- 35 lbs (15.9 kg) at 324 in to 360 in (8230 mm to 9144 mm)
- Fullness
- Ripple fold in 80%, 100% or 120% fullness, not available with curved tracks. Pinch pleat fullness of 3:1 is allowed for sheer drapes only. Every other drape stays at 2.5:1 or less.
- Curved track limits
- Curved radius 20 in (0.5 m) or more
- Tightest inside angle 90°, smaller angles not allowed
- The D105-P drive is not available with curved tracks
- Conditions and ordering: the curved drapery track template construction guide
Questions about document 086117
The answers come from Lutron document 086117 and New Way's record of it.
What is Lutron document 086117?
Lutron's two-page D105 capacity sheet, footer 086117d, dated 05.18.2026. The charts run ripple fold to 216 in (5486 mm) and pinch pleat to 360 in (9144 mm).
Which revision of 086117 is current?
Rev D, dated May 2026, is the revision Lutron publishes. New Way checked it against assets.lutron.com on 15 October 2026.
Which drapery tracks does 086117 cover?
Lutron Sivoia QS drapery tracks.
What is the heaviest drapery a Sivoia QS D105 drive can move?
Lutron document 086117 rates the D105 at up to 105 lbs (48 kg), on straight pinch pleat:
- Peak 105 lbs (47.6 kg) at 108 in to 132 in (2743 mm to 3353 mm)
- 20 lbs (9.1 kg) at 24 in to 32 in (610 mm to 813 mm)
- Lower at other widths and on ripple fold or curved track
What is the difference between the D105 and D105-P drives?
Lutron document 086117 offers Pull-to-Start only with the D105-P, which is not available with curved tracks.
Lutron describes the D105 drapery drives, with and without Pull-to-Start, as able to operate a drapery of up to 105 lbs (48 kg).
Can a D105 drapery track be curved?
Lutron document 086117 offers curved tracks at a radius of 20 in (0.5 m) or more and an inside angle no tighter than 90°.
The one-bend column of the pinch pleat chart gives the reduced capacity. Neither ripple fold nor the D105-P drive is available on curved tracks.
What fullness can the drapery panels have?
Lutron document 086117 allows ripple fold in 80%, 100% or 120% fullness. Pinch pleat is 3:1 for sheer drapes only, with all other drapes at 2.5:1 or less.
Which operating types and track configurations does the D105 system support?
Lutron document 086117 lists the Sivoia QS Wireless and Sivoia QS operating types. Tracks come single, dual, tandem or dual-tandem, with pinch pleat or ripple fold panels.
Other Sivoia QS specification submittals
Specification submittals for the same Sivoia QS system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 086118Drapery Specification Submittal: D145 System, Capacity | B | May 2017 | |
| 086119Drapery Specification Submittal: D175 System, Capacity | C | Apr 2022 | |
| 086123Drapery Specification Submittal: System (Traditional), Chassis | K | Oct 2025 | |
| 085274Hard Wired Power Supply Specification Submittal | D | Aug 2014 |
Documents used with 086117
Lutron documents 086118 and 086119 are the D145 and D175 capacity sheets alongside 086117; the installation guide is 045982. Lutron document 086117 refers Pull-to-Start carriers to the drapery track system specification and curved tracks to the template construction guide.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045982Drapery Installation Guide | Installation Guide | A | Sep 2024 |
| 045985Installation Guide: Wireless Drapery Lite System | Installation Guide | A | Nov 2024 |
| 045983Recessed System for Drapery Installation Guide | Installation Guide | A | Sep 2024 |
| 085807Alena Drapery CAD Drawing: Ceiling-Mount, Section View | CAD Drawing | B | |
| 085821Drapery CAD Drawing: All Pinch Pleat Master Carriers, Detail Views | CAD Drawing | A | |
| Drapery Revit Family: Ceiling Mount | Revit Family | ||
| Drapery Revit Family: Dual (Ceiling Mount) | Revit Family | ||
| Drapery Revit Family: Dual (Wall Mount) | Revit Family | ||
| Drapery Revit Family: Standard Curved (Ceiling Mount) | Revit Family | ||
| Drapery Revit Family: Standard Curved (Wall Mount) | Revit Family |
Revisions of 086117
This page always shows the revision Lutron publishes today. Lutron replaces the file in place; the library keeps Rev C (February 2024) on its own page for projects specified against it.
| Revision | Date | Status |
|---|---|---|
| D | May 2026 | Current. The file on assets.lutron.com. Checked 15 Oct 2026. |
| C | Feb 2024 | Replaced by Rev D in May 2026. Open Rev C, kept for projects specified against it. |
Not covered in 086117, and what to read next
Lutron document 086117 gives capacity only and carries no mounting, wiring or set-up steps.
Publisher and citation for document 086117
Lutron Electronics Co., Inc. publishes document 086117, Rev D, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 15 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 086117 filled in.
