You searched and this document matched it.
See all results085554 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Drapery CAD Drawing: Single Wall-Mount Tandem Draw, Plan View (085554)
Lutron's plan view of the Sivoia QS drapery tandem track on wall brackets, with bracket positions and lengths.
Lutron 085554 Rev A, Sivoia QS Drapery CAD Drawing: Single Wall-Mount Tandem Draw, Plan View. https://assets.lutron.com/a/documents/085554.pdf, via https://newwaykl.com/resources/lutron/drapery/sivoia-qs/lutron-sivoia-qs-drapery-cad-drawing-085554/
About document 085554
Lutron drawing 085554, revision A, is the one-sheet tandem wall mount plan at 1/10 scale: minimum track and system widths, clearance, bracket positions and spacing, EDU and idler lengths and the installer note.
What drawing 085554 covers
Lutron document 085554 has these seven sections, all on its one page.
- Plan view of the tandem track, wall mount
- Minimum track and system widths
- Bracket positions from track ends and splice centers
- Bracket-to-bracket spacing
- EDU and idler lengths
- Minimum clearance and installer clearance note
- Title block: scale, plan view, revision
Specifications in 085554
Lutron document 085554 prints 15 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Minimum per track
- 24 in
- Minimum system width
- 48 in
- Minimum clearance
- 3.50 in (89 mm)
- From end of track, printed twice
- 8.00 in (203 mm)
- Bracket-to-bracket spacing
- 16 in to 24 in (407 mm to 610 mm)
- From splice center, printed twice
- 6 in to 8 in (152 mm to 203 mm)
- EDU length
- 3.63 in (93 mm)
- Idler length
- 3.19 in (81 mm)
- Unlabeled
- 2.38 in (60 mm)
- Unlabeled
- 1.63 in (42 mm)
Title block
PDF page 1 of 085554, opens in a new tab- Sheet title
- Drapery wall mount, tandem track
- Drawing number
- 085554
- Scale
- 1/10
- View
- Plan
- Revision
- A
Facts Lutron states in 085554
The values Lutron document 085554 states, as published:
- Sheet title
- Drapery wall mount, tandem track, plan view
- Minimum per track
- 24 in
- Minimum system width
- 48 in
- Minimum clearance
- 3.50 in (89 mm)
- End bracket position
- 8.00 in (203 mm) from the end of the track, printed twice
- Bracket-to-bracket spacing
- 16 in to 24 in (407 mm to 610 mm)
- Brackets at a splice
- 6 in to 8 in (152 mm to 203 mm) from the splice center, printed twice
- EDU length
- 3.63 in (93 mm)
- Idler length
- 3.19 in (81 mm)
- Further plan dimensions
- 2.38 in (60 mm) and 1.63 in (42 mm), printed without labels
- Scale and revision
- 1/10, plan view, revision A, no date on the sheet
- Installer note
- Tracks supplied by the factory and fitted to the drawing have the clearances for typical fabric panels. The installer keeps the clearances right for the panel actually chosen.
Questions about document 085554
The answers come from Lutron document 085554 and New Way's record of it.
What is Lutron document 085554?
Lutron's one-sheet plan view at 1/10 scale, revision A, undated, titled drapery wall mount, tandem track. Lutron drawing 085554 is a plan view only; 085808 is the wall mount all-views drawing of the same track.
Which revision of 085554 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which drapery tracks does 085554 cover?
Lutron Sivoia QS drapery tracks.
How wide must a tandem Sivoia QS drapery system be?
Lutron drawing 085554 states a minimum of 24 in per track and 48 in for the tandem system width. Lutron prints both figures in inches only.
What clearance does the tandem track need?
Lutron drawing 085554 shows a minimum clearance of 3.50 in (89 mm). Lutron adds that factory-supplied tracks fitted to the drawing suit typical fabric panels.
The installer keeps the clearances right for the fabric chosen.
Where do the wall brackets go on a tandem track?
Lutron drawing 085554 places the wall brackets at three plan dimensions.
- 8.00 in (203 mm) from the end of the track
- 16 in to 24 in (407 mm to 610 mm) bracket to bracket
- 6 in to 8 in (152 mm to 203 mm) from a splice center
What EDU length and idler length does the tandem plan print?
Lutron drawing 085554 gives an EDU length of 3.63 in (93 mm) and an idler length of 3.19 in (81 mm).
What do the 2.38 in and 1.63 in figures measure?
Lutron drawing 085554 prints 2.38 in (60 mm) and 1.63 in (42 mm) on the plan without labels. The sheet does not say what either one measures.
Other Sivoia QS CAD drawings
CAD drawings for the same Sivoia QS system:
All 33 Sivoia QS CAD drawingsDocuments used with 085554
Lutron drawing 085554 pairs with 085808, the wall mount all-views drawing, and 085810, the bracket detail drawing. Lutron documents 045982 and 086123 are the Sivoia QS drapery installation guide and chassis specification submittal.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045982Drapery Installation Guide | Installation Guide | A | Sep 2024 |
| 086123Drapery Specification Submittal: System (Traditional), Chassis | Specification Submittal | K | Oct 2025 |
| 086117Drapery Specification Submittal: D105 System, Capacity | Specification Submittal | D | May 2026 |
| 086118Drapery Specification Submittal: D145 System, Capacity | Specification Submittal | B | May 2017 |
| 045985Installation Guide: Wireless Drapery Lite System | Installation Guide | A | Nov 2024 |
| 045983Recessed System for Drapery Installation Guide | Installation Guide | A | Sep 2024 |
| Drapery Revit Family: Standard Curved (Wall Mount) | Revit Family | ||
| Drapery Revit Family: Wall Mount | Revit Family | ||
| Drapery Revit Family: Ceiling Mount | Revit Family | ||
| Drapery Revit Family: Dual (Ceiling Mount) | Revit Family |
Revisions of 085554
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085554, and what to read next
Lutron drawing 085554 shows the tandem track in plan only: no elevation, section, bracket detail or wiring is printed.
Publisher and citation for document 085554
Lutron Electronics Co., Inc. publishes document 085554, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085554 filled in.
