You searched and this document matched it.
See all results085825 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Drapery CAD Drawing: Ripple Fold Idler Bracket, Detail View (085825)
Lutron's detail drawing of the ripple fold idler bracket for the Sivoia QS drapery track.
Lutron 085825 Rev A, Sivoia QS Drapery CAD Drawing: Ripple Fold Idler Bracket, Detail View. https://assets.lutron.com/a/documents/085825.pdf, via https://newwaykl.com/resources/lutron/drapery/sivoia-qs/lutron-sivoia-qs-drapery-cad-drawing-085825/
About document 085825
Lutron drawing 085825, revision A, is the one-sheet idler bracket detail for kit SQD-R-CDM-KIT6: four unlabeled dimensions, the center draw and pull-to-start note, the kit contents and the snap spacing note.
What drawing 085825 covers
Lutron document 085825 has these eight sections, all on its one page.
- Isometric view of the idler bracket
- Section view
- Plan view
- Elevation view
- Snap spacing note
- Application: ripple fold, pull-to-start, center draw only
- Kit contents
- Title block: scale, sheet, revision
Specifications in 085825
Lutron document 085825 prints 15 values in the groups the document uses, each with the document's unit. A row names the catalog codes it applies to. The page link beside each group opens the PDF where the group starts.
Application
PDF page 1 of 085825, opens in a new tab- System
- Ripple fold, with or without pull-to-startModels: SQD-R-CDM-KIT6
- Draw
- Center draw onlyModels: SQD-R-CDM-KIT6
Kit contents
PDF page 1 of 085825, opens in a new tab- Idler brackets per kit
- 6Models: SQD-R-CDM-KIT6
- Master carriers per kit
- 6 SQD-R-CDMModels: SQD-R-CDM-KIT6
Dimensions
PDF page 1 of 085825, opens in a new tab- Unlabeled
- 3.23 in (82 mm)
- Unlabeled
- 2.09 in (53 mm)
- Unlabeled
- 1.72 in (44 mm)
- Unlabeled
- 1.18 in (30 mm)
- Snap spacing on fabric panels
- Not printed; see the Sivoia QS drapery system chassis spec submittal
Title block
PDF page 1 of 085825, opens in a new tab- Part
- Ripple fold idler bracket
- Drawing number
- 085825
- Scale
- 1/2
- Views
- Isometric, section, plan, elevation
- Sheet
- 1 of 1
- Revision
- A
Facts Lutron states in 085825
The values Lutron document 085825 states, as published:
- Drawing
- 085825, detail drawing, sheet 1 of 1, revision A, scale 1/2
- Part drawn
- Ripple fold idler bracket for the Sivoia QS drapery track
- Application
- Ripple fold systems, both with and without pull-to-start
- Draw type
- Center draw only
- Kit part number
- SQD-R-CDM-KIT6
- Kit contents
- 6 idler brackets and 6 SQD-R-CDM master carriers per SQD-R-CDM-KIT6
- Dimensions
- Printed without labels:
- 3.23 in (82 mm)
- 2.09 in (53 mm)
- 1.72 in (44 mm)
- 1.18 in (30 mm)
- Views
- Isometric, section, plan and elevation
- Snap spacing
- Not printed. Lutron's note points to the Sivoia QS drapery system chassis spec submittal for the recommended spacing on fabric panels.
- Submittal number for snap spacing
- Not given on the sheet
Questions about document 085825
The answers come from Lutron document 085825 and New Way's record of it.
What is Lutron document 085825?
Lutron's sheet 1 of 1 at 1/2 scale, drawing the idler bracket alone in isometric, section, plan and elevation views.
Which revision of 085825 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which drapery tracks does 085825 cover?
Lutron Sivoia QS drapery tracks.
What does part number SQD-R-CDM-KIT6 include?
Lutron drawing 085825 states that kit SQD-R-CDM-KIT6 comes with six ripple fold idler brackets and six SQD-R-CDM master carriers.
Which draw types and tracks does the idler bracket serve?
Lutron drawing 085825 marks the bracket for center draw only, on ripple fold tracks with or without pull-to-start. The sheet gives no basis for using it on a side draw track.
Where does the installer find the snap spacing for the fabric panels?
Lutron drawing 085825 prints no snap spacing. Lutron's note sends the reader to the Sivoia QS drapery system chassis spec submittal.
In this library, Lutron document 086123 is the Sivoia QS drapery chassis specification submittal.
How large is the idler bracket?
Lutron drawing 085825 prints four dimensions: 3.23 in (82 mm), 2.09 in (53 mm), 1.72 in (44 mm) and 1.18 in (30 mm). Lutron's sheet does not label which dimension is which.
Is the SQD-R-CDM master carrier drawn on the sheet?
Lutron drawing 085825 names the SQD-R-CDM master carrier only as part of the kit and does not draw it. Lutron drawing 085822 is the ripple fold master carriers detail drawing.
Other Sivoia QS CAD drawings
CAD drawings for the same Sivoia QS system:
All 33 Sivoia QS CAD drawingsDocuments used with 085825
Lutron drawing 085825 is the idler bracket counterpart of 085824; 085823 is the pinch pleat drive bracket detail. Drawing 085822 is the master carriers detail; 086123 and 045982 are the chassis specification submittal and the drapery installation guide.
| Document | Type | Revision | Date |
|---|---|---|---|
| 086123Drapery Specification Submittal: System (Traditional), Chassis | Specification Submittal | K | Oct 2025 |
| 045982Drapery Installation Guide | Installation Guide | A | Sep 2024 |
| 086117Drapery Specification Submittal: D105 System, Capacity | Specification Submittal | D | May 2026 |
| 086118Drapery Specification Submittal: D145 System, Capacity | Specification Submittal | B | May 2017 |
| 045985Installation Guide: Wireless Drapery Lite System | Installation Guide | A | Nov 2024 |
| 045983Recessed System for Drapery Installation Guide | Installation Guide | A | Sep 2024 |
| Drapery Revit Family: Ceiling Mount | Revit Family | ||
| Drapery Revit Family: Dual (Ceiling Mount) | Revit Family | ||
| Drapery Revit Family: Dual (Wall Mount) | Revit Family | ||
| Drapery Revit Family: Standard Curved (Ceiling Mount) | Revit Family |
Revisions of 085825
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085825, and what to read next
Lutron drawing 085825 shows the idler bracket alone, without the track, drive, mounting brackets, fixings or snap spacing.
Publisher and citation for document 085825
Lutron Electronics Co., Inc. publishes document 085825, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085825 filled in.
