You searched and this document matched it.
See all resultsCAD Drawing · English · PDF, DWG, DXF
Lutron Serena Honeycomb Shades CAD Drawing: External Battery Pack Elevation
Lutron's CAD elevation of the Serena cellular shade external battery pack, with the shade tilted for battery access.
Lutron, Serena Honeycomb Shades CAD Drawing: External Battery Pack Elevation. https://assets.lutron.com/a/documents/011-ser-exbat-e.pdf, via https://newwaykl.com/resources/lutron/honeycomb-shades/triathlon/lutron-serena-honeycomb-shades-cad-drawing-external-battery-pack-elevation/
About this Triathlon drawing
Lutron drawing 011-SER-EXBAT-E, revision field a dash, copyright 2009, is the one-page external battery pack elevation at 1/2 scale: elevation view, tilted battery access view, size range note and stack height note.
What this Triathlon drawing covers
This Triathlon drawing has these six sections, all on its one page.
- Elevation view of the Serena cellular shade
- Shade tilted for battery access, battery holder labeled
- Ordered width, height and stack height dimension lines
- External battery pack shade size range note
- Stack height range note
- Title block: drawing number, scale and revision
Specifications in this Triathlon drawing
This Triathlon drawing prints 14 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- External battery pack, shade size range
- 14 1/2 in to 20 1/2 in
Elevation view
PDF page 1 of this Triathlon drawing, opens in a new tab- Ordered shade width
- Marked, no figure printed
- Ordered shade height
- Marked, no figure printed
- Stack height
- 2.5 in to 5 in
- Stack height depends on
- Shade height and fabric selection
- Actual stack height
- Estimated during the online order process
Shade tilted for battery access
PDF page 1 of this Triathlon drawing, opens in a new tab- Battery holder
- Labeled
- Shade position
- Drawn tilted for battery access
- Drawing series
- Serena cellular shade detail drawing
- Sheet title
- Serena cellular shade external battery pack
- Drawing number
- 011-SER-EXBAT-E
- Scale
- 1/2
- Revision
- Dash (no letter)
- Copyright
- 2009
Facts Lutron states in this Triathlon drawing
The values this Triathlon drawing states, as published:
- Subject
- Serena cellular shade external battery pack, elevation view
- Battery access
- The shade is drawn tilted for battery access, with the battery holder labeled
- External battery pack size range
- 14 1/2 in to 20 1/2 in, printed in inches only. The drawing does not say whether the range is the shade width or height
- Stack height
- 2.5 in to 5 in, printed in inches only
- What sets the stack height
- Shade height and fabric selection
- Actual stack height
- Estimated during the online order process, as the sheet's note states
- Dimension lines without figures
- Ordered shade width, ordered shade height and stack height
- Drawing number
- 011-SER-EXBAT-E, with no separate Lutron document number printed
- Scale, revision and date
- 1/2 scale
- Revision field prints a dash
- Copyright 2009
- No issue date
- File formats
- PDF, DWG and DXF files are published for this drawing
Questions about this Triathlon drawing
The answers come from this Triathlon drawing and New Way's record of it.
What is Lutron drawing 011-SER-EXBAT-E?
Lutron's sheet prints no separate document number and no issue date, and names the product Serena Cellular Shade.
Which revision of this Triathlon drawing is current?
Lutron publishes this Triathlon drawing without a revision letter. New Way checked it against assets.lutron.com on 16 October 2026.
Which honeycomb shades does this Triathlon drawing cover?
Lutron Triathlon honeycomb shades.
Which shade sizes use the Serena external battery pack?
Lutron drawing 011-SER-EXBAT-E notes that the external battery pack is for shades 14 1/2 in to 20 1/2 in. Lutron does not say whether that range is the width or the height, and prints no millimeter equivalent.
How is the battery holder reached on the external battery pack?
Lutron draws the Serena cellular shade tilted for battery access, with the battery holder labeled in that tilted view. Lutron's sheet gives no tilt angle, clearance or step-by-step instruction for the battery change.
Does the elevation dimension the brackets or name the fixings?
Lutron drawing 011-SER-EXBAT-E prints no bracket spacing and names no screw or anchor. Lutron marks the ordered shade width, ordered shade height and stack height without figures, so fixings are not stated.
How much stack height should the elevation allow?
Lutron puts the stack height of the Serena cellular shade at 2.5 in to 5 in.
Shade height and fabric selection decide where the stack falls in that range. The actual figure is estimated during the online order process.
Is a DWG or DXF available for the elevation?
Lutron publishes drawing 011-SER-EXBAT-E as PDF, DWG and DXF files, so the elevation drops straight into a CAD drawing set.
Other Triathlon CAD drawings
CAD drawings for the same Triathlon system:
All 19 Triathlon CAD drawingsDocuments used with this Triathlon drawing
Lutron's three other external battery pack drawings are 010-SER-EXBAT-S (typical section), 013-SER-EXBAT-TRIM-S (section with trim) and 012-SER-EXBAT-TLT-S (battery access section). Lutron document 045830 is the Serena insulating honeycomb shade installation guide, 085275 the specification submittal, 085300 the cable-guided version's submittal.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045830Serena Insulating Honeycomb Shade Installation Guide | Installation Guide | B | Oct 2020 |
| 085275Serena Insulating Honeycomb Shades Specification Submittal | Specification Submittal | G | Jun 2020 |
| 085300Serena Cable-Guided Insulating Honeycomb Shades Specification Submittal | Specification Submittal | A | May 2013 |
| 085745Serena and Architectural Honeycomb Shades Specification Submittal | Specification Submittal | F | Sep 2023 |
| 3682573Serena Honeycomb and Wood Blinds Stack Specification Submittal | Specification Submittal | L | Jan 2022 |
| 045902Serena and Architectural Honeycomb Shades Installation Guide | Installation Guide | A | Feb 2022 |
| 045836Serena and Wood Blinds Installation Guide | Installation Guide | F | Mar 2025 |
| Honeycomb Shades Revit Family: Insulating | Revit Family | ||
| 085276Serena 10 Output Power Panel Power Supply (12 V) Specification Submittal | Specification Submittal | C | May 2016 |
| 085283Serena Individual Plug-In Power Supply Specification Submittal | Specification Submittal | D | Nov 2018 |
Not covered in this Triathlon drawing, and what to read next
Lutron drawing 011-SER-EXBAT-E prints no bracket spacing, fixings, clearances, millimeter values or installation steps.
- Section: 010-SER-EXBAT-S, the matching external battery pack typical section
- Installation: 045830, the Serena insulating honeycomb shade installation guide
Publisher and citation for this Triathlon drawing
Lutron Electronics Co., Inc. publishes this document and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron, Triathlon and Serena are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Triathlon?
New Way supplies and installs Lutron Triathlon shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
