You searched and this document matched it.
See all results085275 · Specification Submittal · Rev G · Jun 2020 · English · PDF, 4 pages, 1.4 MB
Lutron Serena Insulating Honeycomb Shades Specification Submittal (085275, rev G)
Lutron's specification submittal for Serena and Sivoia QS Triathlon insulating honeycomb shades, battery, wired or cordless manual.
Lutron 085275 Rev G (June 2020), Serena Insulating Honeycomb Shades Specification Submittal. https://assets.lutron.com/a/documents/085-275 cellular shade spec sub.pdf, via https://newwaykl.com/resources/lutron/honeycomb-shades/triathlon/lutron-serena-insulating-honeycomb-shades-specification-submittal-085275/
About document 085275
Lutron document 085275, Rev G of June 2020, is the insulating honeycomb shade specification submittal: ratings, approvals, environment, controls, width and height limits, bracket drawings, mounting options, bracket counts, fabric R values and power options.
What submittal 085275 covers
Lutron document 085275 has these twelve sections. Each link opens the PDF at that page in a new tab.
- Features, opens in a new tab page 1
- Regulatory, opens in a new tab page 1
- Ratings, opens in a new tab page 1
- Environment, opens in a new tab page 1
- Compatible controls by model, opens in a new tab page 1
- Shade width and height by type, opens in a new tab page 2
- Bracket dimensions, stack height and light gap, opens in a new tab page 2
- Mounting options, opens in a new tab page 3
- Bracket count by shade size and fabric, opens in a new tab page 3
- Fabric options and R values, opens in a new tab page 3
- Single cell and double cell options, opens in a new tab page 3
- Power options, opens in a new tab page 4
Specifications in 085275
Lutron document 085275 prints 54 values in the groups the document uses, each with the document's unit. A row names the catalog codes it applies to. The page link beside each group opens the PDF where the group starts.
- Models available
- Battery-powered, wired power, cordless manual
- Stopping interval
- 0.125 in (3 mm) throughout the travel
- Bottom rail alignment
- Triathlon drive compensates for fabric weight and battery voltage
- Wireless communication
- Built-in Clear Connect RF
- Wireless control range
- 30 ft (9 m)
- Cordless manual models
- Bottom bar handle included
- Battery performance
- Details in the shade ordering tool
Regulatory
PDF page 1 of 085275, opens in a new tab- Listings and approvals
- cULus listed (E135084); FCC (USA); IC (Canada); CFT (Mexico); CRC (Colombia); SUTEL (Costa Rica); ANATEL (Brazil); SUPERTEL (Ecuador); CE; FCC (USA, Hong Kong); CMIIT (China); IDA (Singapore); CE (European Union); TRA (UAE)
- Operating voltage
- 6 V to 12 V DC
- Operating wattage
- 5 W
- Torque
- 2.5 in-lb (0.28 N·m)
- Speed
- 1.8 in/sec
Environment
PDF page 1 of 085275, opens in a new tab- Temperature
- 32 °F to 104 °F (0 °C to 40 °C)
- Location
- Indoor use only
- Relative humidity
- Below 90%, non-condensing
Compatible Controls
PDF page 1 of 085275, opens in a new tab- Serena models
- Pico wireless control, 4-Group RF Shade Remote Control, Caséta (Smart Bridge)
- Sivoia QS Triathlon models
- Pico wireless control, 4-Group RF Shade Remote Control, seeTouch RF keypads, GRAFIK Eye QS, RadioRA 2, HomeWorks QS, Caséta (Smart Bridge Pro)
System Dimensions
PDF page 2 of 085275, opens in a new tab- Brackets
- Cordless manual shades: brackets; automated shades: Tap 'n' Tilt brackets
- Shade width, cordless manual
- 14.5 in (368 mm) minimum to 63 in (1600 mm) maximum
- Shade width, automated
- 14.5 in (368 mm) minimum to 96 in (2438 mm) maximum
- Fabric width
- Shade width minus 0.125 in (3 mm)
- Shade height, cordless manual
- 12 in (305 mm) minimum to 72 in (1829 mm) maximum
- Shade height, automated
- 12 in (305 mm) minimum to 96 in (2438 mm) maximum
- Light gap (side views with shade installed)
- 0.25 in (6 mm) Tap 'n' Tilt bracket, automated; 0.1875 in (5 mm) bracket, cordless manual
- Stack height
- Fully raised shade, top of bracket to bottom of bottom rail; figures in the Serena Stack Guidelines
- Spacers included
- When outside mount above/below trim is on the order, and/or the shade has an external battery holder
Mounting Options
PDF page 3 of 085275, opens in a new tab- Mounting options
- Inside mount; outside mount on trim; outside mount above trim (includes spacers)
Bracket count by shade size and fabric
PDF page 3 of 085275, opens in a new tab- Cyprus, Monaco
- 14 1/2 in to 45 in (368 mm to 1143 mm): 2 brackets
- Cyprus, Monaco
- 45 1/8 in to 69 in (1146 mm to 1753 mm): 3 brackets
- Cyprus, Monaco
- 69 1/8 in to 96 in (1756 mm to 2438 mm): 4 brackets
- Rio, Napa
- 14 1/2 in to 48 in (368 mm to 1219 mm): 2 brackets
- Rio, Napa
- 48 1/8 in to 72 in (1222 mm to 1829 mm): 3 brackets
- Rio, Napa
- 72 1/8 in to 96 in (1832 mm to 2438 mm): 4 brackets
Fabric Options
PDF page 3 of 085275, opens in a new tab- Light-filtering single-cell: Cyprus
- R value 3.5; available with fire rated option
- Light-filtering single-cell: Monaco, Rio
- R value 3.5
- Light-filtering single-cell: Napa
- R value 3.4
- Light-filtering double-cell: Monaco, Rio
- R value 3.6
- Room-darkening: Cyprus
- R value 4.3; available with fire rated option
- Room-darkening: Monaco, Rio
- R value 4.3
Honeycomb Options
PDF page 3 of 085275, opens in a new tab- Cell height (profile view, general reference only)
- 9/16 in single cell; 7/16 in double cell
Power panel
PDF page 4 of 085275, opens in a new tab- 10-output power supply
- Available separately; line voltage; up to 10 power outputsModels: CSPS-P1-10-6
- Secondary wiring
- Type CL2, CL2P, CL2R, CL2X or equivalent or better cable, to local and national electric code
- Shade power wiring
- 20 AWG to 16 AWG (0.5 mm² to 1.5 mm²), stranded, 2-conductor
Battery power
PDF page 4 of 085275, opens in a new tab- Batteries
- Not included; type and quantity vary with shade size and fabric
- Battery holder location
- Typically within the headrail; an 8 AA holder on the back of the headrail when the shade is too narrow, with bracket spacers for rear clearance
Power Options
PDF page 4 of 085275, opens in a new tab- Input voltage
- 120 V to 240 V AC
- Maximum input current
- 1.5 A
- Operating frequency
- 50/60 Hz
- Output voltage
- 12 V DC
- Output current
- 5 A
- ESD protection
- (+/-) 16 kV
Plug-in power supply
PDF page 4 of 085275, opens in a new tab- Power wire
- 15 ft (4572 mm), included with the shade; wiring compartment on either side
- Individual power supply
- Available separatelyModels: CSPS-XX-1-6-WH
- Variants (plug-face symbol only; no plug type in words)
- ListedModels: CSPS-P1-1-6-WH, CSPS-P2-1-6-WH, CSPS-P3-1-6-WH
Facts Lutron states in 085275
The values Lutron document 085275 states, as published:
- Drive ratings
- Operating voltage 6 V to 12 V DC, operating wattage 5 W, torque 2.5 in-lb (0.28 N·m), speed 1.8 in/sec. The drive stops at 0.125 in (3 mm) intervals.
- Environment
- 32 °F to 104 °F (0 °C to 40 °C), indoor use only, relative humidity below 90% non-condensing
- Wireless control
- Built-in Clear Connect RF, control range 30 ft (9 m)
- Shade width
- Cordless manual: 14.5 in (368 mm) to 63 in (1600 mm)
- Automated: 14.5 in (368 mm) to 96 in (2438 mm)
- Fabric width: 0.125 in (3 mm) less than the shade width
- Shade height
- Cordless manual: 12 in (305 mm) to 72 in (1829 mm)
- Automated: 12 in (305 mm) to 96 in (2438 mm)
- Mounting options
- Inside mount, outside mount on trim, and outside mount above trim with spacers included. Spacers also come with a shade that has an external battery holder.
- Light gap
- Automated, Tap 'n' Tilt bracket side view: 0.25 in (6 mm)
- Cordless manual bracket side view: 0.1875 in (5 mm)
- Each with the shade installed
- Stack height
- Lutron measures stack height on a fully raised shade, from the bracket top to the underside of the bottom rail. Lutron points to its Serena Stack Guidelines for the figures.
- Bracket count
- 2 brackets: to 45 in (1143 mm) in Cyprus and Monaco
- 2 brackets: to 48 in (1219 mm) in Rio and Napa
- 3 brackets: to 69 in (1753 mm) or 72 in (1829 mm) by fabric
- 4 brackets: to 96 in (2438 mm)
- R values
- Light-filtering single-cell: Cyprus 3.5, Monaco and Rio 3.5, Napa 3.4
- Light-filtering double-cell: Monaco and Rio 3.6
- Room-darkening: Cyprus 4.3, Monaco and Rio 4.3
- Cyprus available with a fire rated option
- Regulatory
- cULus listed (E135084), FCC (USA), IC (Canada), CFT (Mexico)
- CRC (Colombia), SUTEL (Costa Rica), ANATEL (Brazil), SUPERTEL (Ecuador)
- CE, CMIIT (China), IDA (Singapore), TRA (UAE)
- Wired-power cable
- 20 AWG to 16 AWG (0.5 mm² to 1.5 mm²) stranded two-conductor cable
- Type CL2, CL2P, CL2R, CL2X or equivalent
- The CSPS-P1-10-6 panel feeds up to 10 outputs
- Battery and plug-in power
- Battery holders sit inside the headrail
- Narrow shades: 8 AA holder on the headrail back, with bracket spacers
- Plug-in shades: a 15 ft (4572 mm) power wire, wiring compartment on either side
- Cordless manual models
- Supplied with a bottom bar handle. The sheet draws separate brackets for cordless manual shades and Tap 'n' Tilt brackets for automated shades.
Questions about document 085275
The answers come from Lutron document 085275 and New Way's record of it.
What is Lutron document 085275?
Lutron's four-page insulating honeycomb shade specification submittal, Rev G, footer-dated 10 June 2020. Lutron draws the single cell at 9/16 in and the double cell at 7/16 in, as general reference only.
- Automated Tap 'n' Tilt bracket side view: 0.25 in (6 mm) light gap
- Cordless manual bracket side view: 0.1875 in (5 mm) light gap
Which revision of 085275 is current?
Rev G, dated June 2020, is the revision Lutron publishes. New Way checked it against assets.lutron.com on 15 October 2026.
Which honeycomb shades does 085275 cover?
Lutron Triathlon honeycomb shades.
How wide and tall can a Serena insulating honeycomb shade be?
Lutron document 085275 gives cordless manual shades 14.5 in (368 mm) to 63 in (1600 mm) wide.
- Cordless manual height: 12 in (305 mm) to 72 in (1829 mm)
- Automated width: 14.5 in (368 mm) to 96 in (2438 mm)
- Automated height: 12 in (305 mm) to 96 in (2438 mm)
How many brackets does the shade need?
Lutron document 085275 requires 2 brackets up to 45 in (1143 mm) in Cyprus and Monaco fabrics.
- 2 brackets: up to 48 in (1219 mm) in Rio and Napa
- 3 brackets: up to 69 in (1753 mm) or 72 in (1829 mm) by fabric
- 4 brackets: up to 96 in (2438 mm)
What if a shade is too narrow for headrail batteries?
Lutron document 085275 moves the 8 AA battery holder to the headrail back on shades too narrow for it. Lutron then includes mounting bracket spacers to give the extra rear clearance.
What insulation value do the fabrics give?
Lutron document 085275 lists R values from 3.4 to 4.3 by fabric and cell type.
- Light-filtering single-cell Cyprus, Monaco and Rio: 3.5; Napa: 3.4
- Light-filtering double-cell Monaco and Rio: 3.6
- Room-darkening Cyprus, Monaco and Rio: 4.3; Cyprus has a fire rated option
Which controls and power options apply?
Lutron document 085275 pairs Serena models with the Pico wireless control, 4-Group RF shade remote and Caséta Smart Bridge. Sivoia QS Triathlon models also take the Pico and the 4-Group RF shade remote.
- Triathlon also: seeTouch RF keypads, GRAFIK Eye QS, RadioRA 2, HomeWorks QS
- Triathlon also: Caséta Smart Bridge Pro
- Power: batteries, CSPS-P1-10-6 ten-output panel, CSPS-XX-1-6-WH plug-in supply
Other Triathlon specification submittals
Specification submittals for the same Triathlon system:
All 9 Triathlon specification submittalsDocuments used with 085275
Lutron document 085275 pairs with mounting guide 045830, or 045356 for the cordless manual cellular shade. Lutron's architectural and cable-guided submittals are 085745 and 085300; the Triathlon honeycomb selection guide is 3684408.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045830Serena Insulating Honeycomb Shade Installation Guide | Installation Guide | B | Oct 2020 |
| 045356Serena Honeycomb Shades Installation Guide: Manual Cellular Shades | Installation Guide | D | Feb 2012 |
| 3684408Honeycomb Shades Product Brochure: Shade Selection Guide | Product Brochure | C | Dec 2023 |
| 045902Serena and Architectural Honeycomb Shades Installation Guide | Installation Guide | A | Feb 2022 |
| 045836Serena and Wood Blinds Installation Guide | Installation Guide | F | Mar 2025 |
| 085752Serena Honeycomb Shades CAD Drawing: Architectural Inside Mount Battery Access, Section View | CAD Drawing | A | |
| 085751Serena Honeycomb Shades CAD Drawing: Architectural Inside Mount, Elevation View | CAD Drawing | A | |
| Honeycomb Shades Revit Family: Insulating | Revit Family | ||
| Serena Application Note: Blink Codes | Application Note | ||
| 048561Serena Application Note: Optimizing Battery Life in Shades | Application Note | F | Oct 2024 |
Revisions of 085275
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| G | Jun 2020 | Current. The file on assets.lutron.com. Checked 15 Oct 2026. |
Not covered in 085275, and what to read next
Lutron submittal 085275 gives no bracket placement, mounting, power connection or programming; stack heights are in the Serena Stack Guidelines.
Publisher and citation for document 085275
Lutron Electronics Co., Inc. publishes document 085275, Rev G, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 15 October 2026.
Lutron, Sivoia QS, Triathlon and Serena are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Triathlon?
New Way supplies and installs Lutron Triathlon shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085275 filled in.
