You searched and this document matched it.
See all resultsCAD Drawing · English · PDF, DWG, DXF
Lutron Serena Honeycomb Shades CAD Drawing: Inside Mount Section
Lutron's CAD section of an inside-mounted Serena cellular shade, with a 1.50 in (38.1 mm) minimum depth.
Lutron, Serena Honeycomb Shades CAD Drawing: Inside Mount Section. https://assets.lutron.com/a/documents/001-ser-insmt-s.pdf, via https://newwaykl.com/resources/lutron/honeycomb-shades/triathlon/lutron-serena-honeycomb-shades-cad-drawing-inside-mount-section/
About this Triathlon drawing
Lutron drawing 001-SER-INSMT-S, copyright 2009, 1/2 scale, is the Serena cellular shade inside mount section: the minimum depth, wood blocking, trim, glazing and finished ceiling labels, and the stack height note.
What this Triathlon drawing covers
This Triathlon drawing has these seven sections, all on its one page.
- Inside mount section through the shade
- Minimum depth of 1.50 in (38.1 mm)
- Wood blocking and trim labeled
- Glazing (typical) and finished ceiling labeled
- Ordered shade height and stack height dimension lines
- Note on the stack height range
- Title block with title, number, scale and revision
Specifications in this Triathlon drawing
This Triathlon drawing prints 15 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
Typical section
PDF page 1 of this Triathlon drawing, opens in a new tab- Minimum depth
- 1.50 in (38.1 mm)
- Wood blocking
- Labeled
- Trim
- Labeled
- Glazing
- Typical
- Finished ceiling
- Labeled
- Ordered shade height
- Marked, no figure printed
- Stack height
- 2.5 in to 5 in
- Stack height depends on
- Shade height and fabric selection
- Actual stack height
- Estimated during the online order process
- Drawing series
- Serena cellular shade detail drawing
- Sheet title
- Serena cellular shade, inside mount
- Drawing number
- 001-SER-INSMT-S
- Scale
- 1/2
- Revision
- Dash (no letter)
- Copyright
- 2009
Facts Lutron states in this Triathlon drawing
The values this Triathlon drawing states, as published:
- Subject
- Serena cellular shade, inside mount, typical section
- Minimum depth
- 1.50 in (38.1 mm), labeled minimum depth on the section
- Construction labeled
- Wood blocking and trim
- Window and ceiling labeled
- Glazing (typical) and finished ceiling
- Stack height
- 2.5 in to 5 in, printed in inches only
- What sets the stack height
- Shade height and fabric selection
- Actual stack height
- Estimated during the online order process, as the sheet's note states
- Dimension lines without figures
- Ordered shade height and stack height
- Drawing number
- 001-SER-INSMT-S, with no separate Lutron document number printed
- Scale, revision and date
- Scale 1/2
- Revision field prints a dash
- Copyright 2009, no issue date
- File formats
- PDF, DWG and DXF files are published for this drawing
Questions about this Triathlon drawing
The answers come from this Triathlon drawing and New Way's record of it.
What is Lutron drawing 001-SER-INSMT-S?
Lutron's one-page Serena cellular shade inside mount detail sheet, drawn at 1/2 scale with a 2009 copyright. Lutron's title block prints a dash in the revision field and no separate document number or issue date.
Check the 2009 sheet against installation guide 045830 before a submittal relies on it.
Which revision of this Triathlon drawing is current?
Lutron publishes this Triathlon drawing without a revision letter. New Way checked it against assets.lutron.com on 16 October 2026.
Which honeycomb shades does this Triathlon drawing cover?
Lutron Triathlon honeycomb shades.
What minimum depth does Lutron print for the inside mount?
Lutron drawing 001-SER-INSMT-S prints a minimum depth of 1.50 in (38.1 mm) on the inside mount section. Lutron draws no other dimension value on the section, and the sheet's note gives the stack height range in inches.
Does the section name the fixings?
No. Lutron labels wood blocking on drawing 001-SER-INSMT-S but names no screw, anchor or bracket, so fixings are not stated.
Where is battery access shown for the inside mount?
Lutron shows battery access for the inside mount on a separate sheet, 003-SER-INSTLT-S, the matching inside mount battery access section.
How much stack height should the inside mount section allow?
Lutron puts the stack height of the Serena cellular shade at 2.5 in to 5 in. Shade height and fabric selection decide where the stack falls in that range, per the sheet's note.
Lutron's note has the actual figure estimated during the online order process.
Which building elements does Lutron's inside mount section label?
Lutron labels wood blocking, trim, glazing marked typical and the finished ceiling on drawing 001-SER-INSMT-S. Lutron sizes none of them: the 1.50 in (38.1 mm) minimum depth is the section's only dimension value.
The sheet's note adds the 2.5 in to 5 in stack height range.
Other Triathlon CAD drawings
CAD drawings for the same Triathlon system:
All 19 Triathlon CAD drawingsDocuments used with this Triathlon drawing
Lutron pairs this inside mount section with battery access view 003-SER-INSTLT-S; the other mounts are 007-SER-PKT-S, 009-SER-WMTLT-S, 004-SER-WMT-E and 006-SER-WMTLT-E. Lutron's numbered architectural inside mount section view is document 085750, and the installation guide is 045830.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045830Serena Insulating Honeycomb Shade Installation Guide | Installation Guide | B | Oct 2020 |
| 085745Serena and Architectural Honeycomb Shades Specification Submittal | Specification Submittal | F | Sep 2023 |
| 085300Serena Cable-Guided Insulating Honeycomb Shades Specification Submittal | Specification Submittal | A | May 2013 |
| 045902Serena and Architectural Honeycomb Shades Installation Guide | Installation Guide | A | Feb 2022 |
| 045836Serena and Wood Blinds Installation Guide | Installation Guide | F | Mar 2025 |
| Honeycomb Shades Revit Family: Insulating | Revit Family | ||
| 085276Serena 10 Output Power Panel Power Supply (12 V) Specification Submittal | Specification Submittal | C | May 2016 |
| 085283Serena Individual Plug-In Power Supply Specification Submittal | Specification Submittal | D | Nov 2018 |
| Serena Application Note: Blink Codes | Application Note | ||
| 048561Serena Application Note: Optimizing Battery Life in Shades | Application Note | F | Oct 2024 |
Not covered in this Triathlon drawing, and what to read next
Lutron drawing 001-SER-INSMT-S gives no shade widths, bracket positions, fixings or installation steps.
- Battery access: 003-SER-INSTLT-S, the inside mount battery access section
- Mounting: 045830, the Serena insulating honeycomb shade installation guide
Publisher and citation for this Triathlon drawing
Lutron Electronics Co., Inc. publishes this document and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron, Triathlon and Serena are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Triathlon?
New Way supplies and installs Lutron Triathlon shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
