You searched and this document matched it.
See all results085792 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Commercial Roller Shades CAD Drawing: Contract Roller Motorized, Cable Guided 4° with Recessed Pocket, Ceiling Mount, Section View (085792)
Lutron's CAD section of the Contract Roller Motorized shade, cable guided at 4° in a recessed ceiling pocket.
Lutron 085792 Rev A, Commercial Roller Shades CAD Drawing: Contract Roller Motorized, Cable Guided 4° with Recessed Pocket, Ceiling Mount, Section View. https://assets.lutron.com/a/documents/085792.pdf, via https://newwaykl.com/resources/lutron/roller-shades/commercial/lutron-commercial-roller-shades-cad-drawing-085792/
About document 085792
Lutron document 085792, Rev A at scale 1/2, is the one-page Section View of the pocket mount: the fabricated pocket, tube center and maximum roll-up, pocket flap, hembar, fabric sag line and the cable guide.
What drawing 085792 covers
Lutron document 085792 has these ten sections.
- View 1, Section View, scale 1/2
- Fabricated recessed pocket, site-built optional
- Tube, tube center and maximum roll-up
- Pocket flap at the underside of the pocket
- Cable guide, lower termination and mounting load note
- Hembar (varies) and the fabric sag line
- Clearance note, factory supply and adjustment
- Mounting note: ceiling or wall
- Legend (top view) with markers 1 and 2
- Title block: CMR-C, number and revision
Specifications in 085792
Lutron document 085792 prints ten values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Minimum pocket width
- 6.625 in [170 mm]
- Horizontal dimension, second line from the top, no label on the sheet
- 5.375 in [137 mm]
- Horizontal dimension, third line from the top, no label on the sheet
- 2.66 in [68 mm]
- Angle at the upper left of the view, no label on the sheet
- 94°
- Tube center
- 2.64 in [67 mm]
- Pocket height
- 6.25 in [159 mm]
- Max rollup
- Ø3.80 in [Ø97 mm]
- Pocket flap
- 3.0 in [76 mm]
- Minimum clearance to hembar
- 0.5 in [13 mm]
- Cable guide upper and lower mounting points, minimum load
- 300 lbf
Facts Lutron states in 085792
The values Lutron document 085792 states, as published:
- Minimum pocket width
- 6.625 in [170 mm]
- Pocket height
- 6.25 in [159 mm]
- Tube center
- 2.64 in [67 mm]
- Max rollup
- Ø3.80 in [Ø97 mm]
- Pocket flap
- 3.0 in [76 mm]
- Minimum clearance to hembar
- 0.5 in [13 mm]
- Cable guide mounting points
- 300 lbf minimum at each of the upper and lower mounting points, with no metric value given
- Mounting
- Ceiling or wall, with the ceiling mount drawn
- Scale, view and revision
- Scale 1/2, view 1, revision A, with the code CMR-C in the title block
- File formats
- PDF (about 252 KB), DWG and DXF
Questions about document 085792
The answers come from Lutron document 085792 and New Way's record of it.
What is Lutron document 085792?
Lutron's sheet, view 1, coded CMR-C in the title block, supplied as PDF (about 252 KB), DWG and DXF.
Which revision of 085792 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085792 cover?
Lutron Commercial roller shades.
What pocket size does Lutron document 085792 give?
Lutron document 085792 labels the pocket at 6.625 in [170 mm] minimum width and 6.25 in [159 mm] height.
- Pocket flap: 3.0 in [76 mm]
- Tube center: 2.64 in [67 mm]
- Maximum roll-up: Ø3.80 in [Ø97 mm]
What load must the cable guide fixings carry?
Lutron document 085792 requires each cable guide mounting point, upper and lower, to support at least 300 lbf. The sheet prints no metric equivalent.
Can the pocket be site-built and the bracket wall mounted?
Yes on both counts: Lutron document 085792 shows a fabricated pocket and notes a site-built pocket as optional. The mounting note says the bracket supports ceiling or wall mounting, with the ceiling mount drawn.
Why does the section show the fabric curving away from the cable?
Lutron document 085792 draws a fabric sag line and notes that sag depends on system size, fabric and hembar selection. Reducing it may or may not be possible with those choices.
The sheet also labels a minimum clearance to the hembar of 0.5 in [13 mm].
Other Commercial roller shade CAD drawings
CAD drawings for the same Commercial roller shade system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085375Contract Manual CAD Drawing: Contract Roller Manual, Dual Shade, Both Clutches Right with Recessed Pocket, Ceiling Mount, Section View | Commercial Contract Manual | B | |
| 085376Contract Manual CAD Drawing: Contract Roller Manual, Dual Shade, Clutches Left & Right with Recessed Pocket, Ceiling Mount, Section View | Commercial Contract Manual | B | |
| 085373Contract Manual CAD Drawing: Contract Roller Manual, Single Shade with Recessed Pocket, Ceiling Mount, Section View | Commercial Contract Manual | B | |
| 085381Contract Manual CAD Drawing: Contract Roller 4″ Fascia, All Views | Commercial Contract Manual | A |
Documents used with 085792
Lutron drawings 085373 (single) and 085375 and 085376 (dual) are the manual pocket sections; 085381 the 4 in fascia views. Lutron drawing 0285-GUSH-CMT-S is the general cable guided typical section for Sivoia QS roller shades.
Revisions of 085792
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085792, and what to read next
Lutron document 085792 gives no bracket fixing sizes, no wiring and no step-by-step mounting.
- Fabric sag: the Lutron application note on cable guided shade fabric sag
- Manual drive: 085373, the contract manual recessed pocket ceiling mount section
Publisher and citation for document 085792
Lutron Electronics Co., Inc. publishes document 085792, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron is a trademark of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Commercial roller shades?
New Way supplies and installs Lutron Commercial roller shades in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085792 filled in.
