You searched and this document matched it.
See all results085350 · Specification Submittal · Rev F · Apr 2024 · English · PDF, 9 pages, 7.0 MB
Lutron Commercial Contract Manual Specification Submittal: Contract Roller Manual Shades (085350, rev F)
Lutron's specification submittal for the Contract Roller manual shade, a geared-clutch roller shade for mixed manual and motorized jobs.
Lutron 085350 Rev F (April 2024), Commercial Contract Manual Specification Submittal: Contract Roller Manual Shades. https://assets.lutron.com/a/documents/085350.pdf, via https://newwaykl.com/resources/lutron/roller-shades/manual/lutron-commercial-commercial-contract-manual-specification-submittal-085350/
About document 085350
Lutron document 085350, Rev F of April 2024, is the Contract Roller manual shade specification submittal: size limits, light gaps, bracket load, fabrics, clutch and tube options, bottom bars, child safety and mount drawings.
What submittal 085350 covers
Lutron document 085350 has these nine sections. Each link opens the PDF at that page in a new tab.
- Manual roller shades: features and fabric options, opens in a new tab page 1
- Shade options, opens in a new tab page 2
- System dimensions, opens in a new tab page 3
- System dimensions with optional fascia, opens in a new tab page 4
- Mounting options, opens in a new tab page 5
- Dual mounting, opens in a new tab page 6
- Dual mounting with fascia, opens in a new tab page 7
- Cable guided fabric drop options, opens in a new tab page 8
- Cable guided bottom bars and mounting options, opens in a new tab page 9
Specifications in 085350
Lutron document 085350 prints 55 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Operation
- Geared clutch
- Tube material
- Aluminum; no rust stains from cut tube ends
- Maximum width
- 10 ft (3.05 m), fabric permitting
- Maximum height
- 15 ft (4.57 m), fabric permitting
- Light gaps
- 3/4 in (19 mm), symmetrical
- Operating temperature
- 32 °F to 104 °F (0 °C to 40 °C)
- Humidity
- 0% to 90%, non-condensing
- Shade bracket load
- 200 lb (90.1 kg) each
Fabric Options
PDF page 1 of 085350, opens in a new tab- Spec Grade solar screens
- THEIA compliant; standard and dual-sided
- Sustainable solar screens
- PVC-free
- General purpose solar screens
- Standard and dual-sided
- Blackouts
- Standard and dual-sided
Shade Options
PDF page 2 of 085350, opens in a new tab- Mounting
- Inside mount; outside mount
- Fabric drop
- Regular roll; reverse roll
- Bottom bars
- Designer (standard); Sealed; Architectural exposed; Architectural half wrap
- Clutch operator side
- Left or right
- Tube sizes
- 1.7 in (44 mm), 2.0 in (51 mm) or 2.5 in (65 mm), aluminum
- Pull-chain
- Stainless steel, 0.175 in (4.5 mm) ball diameter
- Chain tensioning device
- Pre-installed; ANSI/WCMA A100.1-2022
- Permanent safety label
- 17 7/8 in x 7/8 in (454 mm x 22 mm), bottom bar, window side
System Dimensions
PDF page 3 of 085350, opens in a new tab- Light gap, outside mount
- 0.75 in (19 mm) each end
- Value on the bracket in the system view
- 4.00 in (102 mm)
- Inside mount
- Bracket-to-bracket width less 1/8 in (3 mm)
System Dimensions with Fascia
PDF page 4 of 085350, opens in a new tab- Fascia endcaps
- 0.125 in (3 mm) per end beyond the bracket-to-bracket width
- Inside mount with endcaps
- Deduct 0.25 in (6 mm)
- Light gap, single and dual fascia
- 0.75 in (19 mm) each end
Mounting Options
PDF page 5 of 085350, opens in a new tab- Wall/ceiling brackets
- Clutch bracket with pull-chain guides; idler bracket with idler receiver; white
- Idler bracket drawing (clutch bracket equal)
- 4.00 in (102 mm); 4.00 in (102 mm); 1.25 in (32 mm)
- Optional fascia drawing
- 4.10 in (104 mm); 2.40 in (61 mm)
- Fascia brackets
- Contract Roller Fascia Bracket Kit; wall/ceiling brackets not compatible
- Pocket mount drawing
- 5.00 in (127 mm); 5.125 in (130 mm)
- Pocket flap
- Optional, 2 in (51 mm)
- Fascia, endcap and pocket finishes
- White, black, bronze, silver
- Pull-chain routing guide
- Pre-installed on each clutch bracket
Dual Mounting
PDF page 6 of 085350, opens in a new tab- Dual bracket drawing
- 7.99 in (203 mm); 5.91 in (150 mm), twice; 2.31 in (59 mm)
- Clutch combinations
- 2 left; 2 right; 1 left and 1 right
- 1 left and 1 right
- For side channel jobs
- Curtain wall
- All clutches left or all right
- Dual pocket drawing
- 7.00 in (178 mm); 11.00 in (279 mm); flap 2 in (51 mm)
Dual Mounting, Fascia
PDF page 7 of 085350, opens in a new tab- Dual fascia drawing
- 7.935 in (201.5 mm); 1.06 in (27 mm)
- Clearance for fascia
- 1 in (25 mm) in front of the brackets, recess mounts
- Fascia fixing
- Snaps on, 1 screw each end
- Screw hole drawing
- 0.230 in (5.8 mm); 0.563 in (14.3 mm); 0.350 in (8.9 mm); 0.297 in (7.5 mm)
- Options
- Back cover (inverted fascia); endcaps
Cable Guided Shades
PDF page 8 of 085350, opens in a new tab- Incline
- Up to 20° from vertical
- Mounting
- Ceiling standard; Contract Cable Guide Wall Adapter Kit
- Fabric drops
- Below glass; above glass
- Sag
- Estimated on the quote
Cable Guided Bottom Bars
PDF page 9 of 085350, opens in a new tab- Bottom bars
- Oval bar or Architectural bar, half wrap or exposed
- Recommended pocket, vertical
- 5.50 in (140 mm)
- Recommended pocket, 10°
- 6.375 in (162 mm)
- Recommended pocket, 20°
- 7.50 in (190 mm)
- Max roll-up
- ø3.35 in (85 mm)
- Other values on the pocket drawing
- 4.125 in (105 mm); 0.125 in (3 mm); 6.25 in (159 mm); 2.00 in (51 mm)
- Dual cable guided
- No standard solution
Facts Lutron states in 085350
The values Lutron document 085350 states, as published:
- Maximum size
- 10 ft (3.05 m) wide and 15 ft (4.57 m) tall, fabric permitting, checked in Lutron myProjects
- Light gaps
- 3/4 in (19 mm) symmetrical, which Lutron may widen on tall, narrow shades
- Operating environment
- 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing
- Bracket load
- 200 lb (90.1 kg) per shade bracket, fixed to blocking or other structural material
- Clutch and tube
- Clutch: left or right
- Tube: 1.7 in (44 mm), 2.0 in (51 mm) or 2.5 in (65 mm) aluminum
- Chain: stainless steel, 0.175 in (4.5 mm) balls
- Child safety
- Chain tension device pre-installed to ANSI/WCMA A100.1-2022, fixed by the installer
- Safety label
- Permanent, 17 7/8 in x 7/8 in (454 mm x 22 mm), on the bottom bar's window side
- Shade options
- Mount: inside or outside
- Roll: regular or reverse
- Bottom bars: Designer (standard), Sealed, Architectural exposed or half wrap
- Width deductions
- Inside mount takes 1/8 in (3 mm) off the bracket-to-bracket width, or 0.25 in (6 mm) with fascia endcaps
- Fascia
- Contract Roller Fascia Bracket Kit required
- 1 in (25 mm) clear in front of the brackets, recess mounts
- One screw at each end
- Pull-chain routing
- Guide pre-installed on each clutch bracket
- Fascia notch
- Cut by Lutron only when fascia and side channel ship on the shade
- Dual mounting
- Clutches: 2 left, 2 right, or 1 left and 1 right
- Curtain walls: all clutches on one side
- Side channel: only on the shade nearest the glass
- Finishes
- White brackets, with fascia, endcaps and pockets in white, black, bronze or silver
- Cable guided
- Glazing up to 20° from vertical
- Ceiling mount standard, wall adapter kit optional
- Recommended pocket dimension printed for vertical, 10° and 20°
Questions about document 085350
The answers come from Lutron document 085350 and New Way's record of it.
What is Lutron document 085350?
Lutron's nine-page Contract Roller manual shade specification submittal, dated 25 April 2024 and printed as part number 085350f.
Which revision of 085350 is current?
Rev F, dated April 2024, is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085350 cover?
Lutron Manual roller shades in the Commercial Contract Manual drive class.
How large can a Contract Roller manual shade be?
Lutron document 085350 covers windows up to 10 ft (3.05 m) wide and 15 ft (4.57 m) tall. Lutron notes the fabric can lower that limit and points to Lutron myProjects to confirm size and fabric together.
Which child-safety standard does the manual shade meet?
Lutron document 085350 states the pre-installed pull-chain tension device meets ANSI/WCMA A100.1-2022. Under clause 5.1.1, a permanent label of 17 7/8 in x 7/8 in (454 mm x 22 mm) sits on the bottom bar's window side.
Can fascia go on the standard wall/ceiling brackets?
No. Lutron document 085350 requires the Contract Roller Fascia Bracket Kit, and each fascia endcap adds 0.125 in (3 mm) beyond the bracket-to-bracket width. In recess mounts Lutron asks for 1 in (25 mm) clear in front of the brackets.
Who makes the pull-chain cut-out in the fascia?
Lutron document 085350 has Lutron notch the fascia when fascia and side channel are both configured with the shade. Separately ordered trim is not notched, and the installer adds the clearance.
Which finishes can the designer choose?
Lutron document 085350 supplies the brackets in white and the fascia, endcaps and pockets in white, black, bronze or silver. Lutron document 085350 lists four bottom bars: Designer, Sealed, and the Architectural bar exposed or half wrapped.
Other Manual Commercial Contract Manual specification submittals
Specification submittals for the same Manual Commercial Contract Manual drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085370Commercial Contract Manual Specification Submittal: Contract Roller, QS & QS Wireless Motorized Shades | Commercial Contract Manual | G | Aug 2024 |
Documents used with 085350
Lutron guides 045970 (single mount, optional fascia) and 045975 (dual mount) install the manual shade; 085370 is the motorized submittal. Lutron drawings 085373, 085375, 085376 and 085635 are manual shade sections, 085381 the 4 in fascia, 085382 the pocket.
Revisions of 085350
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| F | Apr 2024 | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085350, and what to read next
Lutron document 085350 gives no installation steps and no fabric performance data.
Publisher and citation for document 085350
Lutron Electronics Co., Inc. publishes document 085350, Rev F, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron is a trademark of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Manual roller shades?
New Way supplies and installs Lutron Manual roller shades in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085350 filled in.
