Lutron Manual Roller Shades documents
Lutron's manual roller shades, the Manual Clutch shade (085608) and the Contract Roller manual shade (085350), with a pull chain.
45 documents Newest revision first
Manual roller shade documents
About Manual roller shades
Lutron's manual roller shades are clutch-operated shades with a pull chain. Lutron offers the Manual Clutch shade (085608) and the Contract Roller manual shade (085350).
- No power or control wiring; the shade runs on a pull chain
- Pre-installed chain tensioning device to ANSI/WCMA A100.1-2022, installer-fixed
- Manual Clutch: clutches sized by fabric weight, 8 lb (3.6 kg) to 30 lb (13.6 kg)
- Contract Roller manual: up to 10 ft (3.05 m) wide and 15 ft (4.57 m) tall
- Shared hardware finishes: white, black, bronze and silver (3672659)
Sizes and hardware
The guide below prints each clutch's capacity and tubes and the Contract Roller manual limits from their submittals. Both draw fabric from the Performance Fabric Collection, which selection guide 3672148 sorts into solar screens and blackouts.
Mounting
Submittal 085350 sets light gaps at 3/4 in (19 mm) each side. An inside mount takes 1/8 in (3 mm) off the bracket-to-bracket width, and each bracket is fixed to carry 200 lb (90.1 kg).
Writing it into a tender
A specifier attaches 085350 or 085608. The installer follows guides 045970 and 045975 (Contract Roller manual) or 045971 and 045973 (Manual Clutch).
Which Manual roller shade product to specify
Five options, each with the case it suits and the limits Lutron prints for it. The source link opens the document that states them.
| Option | Pick it when | Limits | Source |
|---|---|---|---|
| Clutch V8 | A small, light shade where the fabric roll weighs no more than 8 lb (3.6 kg). |
| 085608Clutch Specification Submittal |
| Clutch V16 | A mid-size shade where the fabric roll weighs up to 16 lb (7.3 kg); the most drawn clutch in the library. |
| 085608Clutch Specification Submittal |
| Clutch V24 | A larger shade where the fabric roll weighs up to 24 lb (10.8 kg). |
| 085608Clutch Specification Submittal |
| Clutch V24 with spring assist | The heaviest manual roll, up to 30 lb (13.6 kg), where the spring assist eases the pull. |
| 085608Clutch Specification Submittal |
| Commercial Contract Manual | A commercial project mixing manual and motorized Contract Roller shades, or one needing cable guides on sloped glazing. |
| 085350Commercial Contract Manual Specification Submittal: Contract Roller Manual Shades |
Questions about Manual roller shades
Eight questions specifiers ask about Lutron manual roller shades, answered from the submittals named in each answer.
How wide can a Lutron Contract Roller manual shade be?
Up to 10 ft (3.05 m) wide and 15 ft (4.57 m) tall, per submittal 085350, with fabric able to limit the size.
- Inside mount: bracket-to-bracket width less 1/8 in (3 mm)
- Fascia endcaps add 0.125 in (3 mm) at each end
Light gaps are 3/4 in (19 mm) and may widen on tall, narrow shades.
How much fabric can a Lutron Manual Clutch shade lift?
Up to 30 lb (13.6 kg), per submittal 085608, which rates each clutch by fabric weight.
- V8: 8 lb (3.6 kg), 1 in (25 mm) steel tube
- V16: 16 lb (7.3 kg); V24: 24 lb (10.8 kg)
- V24 with spring assist: 30 lb (13.6 kg)
The submittal gives no maximum width or height.
How do the Manual Clutch and Contract Roller manual shades differ?
Submittal 085608 rates the Manual Clutch shade by fabric weight on steel or aluminum tubes. Submittal 085350 prints width and height maxima for the Contract Roller manual shade on aluminum tubes.
Sell sheet 3672659 shows it sharing fascia, pocket, side channel and sill angle with the motorized shade. Both carry the chain tensioning device and Performance Fabric Collection fabrics.
Does a Lutron manual roller shade need a power supply?
No. Submittals 085608 and 085350 describe clutch-operated shades with a pull chain and no drive. The hembar is the bar at the bottom of the shade fabric.
Smart panel 085335, junction box supply 085544 and the hembar alignment paper 3672063 serve the motorized shade (085370). Lutron files the motorized shade here because the two share one hardware family.
Can manual and motorized Contract Roller shades share one fascia?
Yes: sell sheet 3672659 gives both the same fascia, pocket, side channel and sill angle.
Submittal 085350 prints the 4 in (102 mm) fascia and a 5 in x 5 1/8 in (127 mm x 130 mm) single pocket. Lutron notches the fascia only when fascia and side channel ship together; otherwise the installer cuts the clearance.
How is the pull chain made safe for children?
Submittal 085350 fits a stainless steel pull chain with 0.175 in (4.5 mm) balls and a pre-installed chain tensioning device meeting ANSI/WCMA A100.1-2022.
- Safety label 17 7/8 in x 7/8 in (454 mm x 22 mm) on the bottom bar
Submittal 085608 ships the same tensioning device and warning with the Manual Clutch shade.
How are two Lutron manual shades mounted in one window?
Dual brackets for wall, ceiling, pocket or fascia mount (085350) take both clutches left, both right, or one each side.
- Mixed pair: side channel jobs, channel on the shade nearest the window
- Curtain walls: all clutches on one side
- Dual pocket 7 in x 11 in (178 mm x 279 mm), optional 2 in (51 mm) flap
Which documents go into a tender for Lutron manual roller shades?
Submittal 085350 for the Contract Roller manual shade or 085608 for the Manual Clutch shade.
- Guides: 045970, 045975 (Contract Roller manual); 045971, 045973 (Manual Clutch)
- Drawings 085373, 085375, 085376, 085635 (sections); 085381 fascia; 085382 pocket
- Manual Clutch drawings: V8, V16, V24 mounts; Revit: single and dual
Lutron's eight-year limited warranty (368-5115) covers the manual shade system for eight years.
