You searched and this document matched it.
See all results085375 · CAD Drawing · Rev B · English · PDF, DWG, DXF
Lutron Commercial Contract Manual CAD Drawing: Contract Roller Manual, Dual Shade, Both Clutches Right with Recessed Pocket, Ceiling Mount, Section View (085375)
Lutron's section drawing of a Contract Roller Manual dual shade (right clutch), ceiling mounted inside a recessed pocket.
Lutron 085375 Rev B, Commercial Contract Manual CAD Drawing: Contract Roller Manual, Dual Shade, Both Clutches Right with Recessed Pocket, Ceiling Mount, Section View. https://assets.lutron.com/a/documents/085375.pdf, via https://newwaykl.com/resources/lutron/roller-shades/manual/lutron-commercial-commercial-contract-manual-cad-drawing-085375/
About document 085375
Lutron document 085375, Rev B at scale 1/3, is the manual dual shade recessed pocket section, right clutch: pocket depth, height and flap, tube and roll-up diameters, tube centers, tensioner and mounting notes.
What drawing 085375 covers
Lutron document 085375 has these eight sections, all on its one page.
- Section view through the pocket, ceiling mount shown
- Pocket depth, pocket height and pocket flap
- Tube diameter, optional tube and maximum roll-up
- Tube center dimensions
- Chain tensioner note
- Legend (top view) and mounting note
- Clearance and adjustment note
- Title block: code, number, scale, view, revision
Specifications in 085375
Lutron document 085375 prints 26 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
View 1, section
PDF page 1 of 085375, opens in a new tab- Pocket depth
- 7.00 in (178 mm)
- Pocket height
- 11.00 in (279 mm)
- Pocket flap
- 2.00 in (51 mm)
- Tube diameter
- Ø1.75 in (44 mm)
- Optional tube diameter
- Ø2.56 in (65 mm)
- Maximum roll-up, first shade
- Ø3.35 in (85 mm)
- Maximum roll-up, second shade
- Ø3.35 in (85 mm)
- Tube center
- 2.25 in (58 mm)
- Tube center
- 3.88 in (98 mm)
- Tube center
- 5.13 in (130 mm)
- Tube center
- 8.69 in (221 mm)
- Unlabeled dimension
- 0.63 in (16 mm)
- Unlabeled dimension
- 2.19 in (55 mm)
- Hembar
- Varies (two hembars drawn)
- Fixing shown
- Ceiling fasteners
- Bracket mounting
- Ceiling or wall (ceiling mount shown)
- Chain tensioner
- Wall or floor mounted
- Clearances
- Set at the factory; kept by the installer when adjustment features are used
- Adjustments at maximum roll diameter
- Not all available
Title block
PDF page 1 of 085375, opens in a new tab- Product
- Contract Roller Manual
- Sheet title
- Ceiling mount dual shade (right clutch) in recessed pocket
- Code
- CHR-C
- Number as printed
- 085375
- Scale
- 1/3
- View
- 1
- Revision
- B
Facts Lutron states in 085375
The values Lutron document 085375 states, as published:
- What the drawing shows
- A section through a Contract Roller Manual dual shade, right clutch, in a recessed pocket with ceiling fasteners
- Pocket depth
- 7.00 in (178 mm)
- Pocket height
- 11.00 in (279 mm)
- Pocket flap
- 2.00 in (51 mm)
- Tube diameter
- Ø1.75 in (44 mm), optional Ø2.56 in (65 mm)
- Maximum roll-up
- Ø3.35 in (85 mm) on each of the two shades
- Tube center dimensions
- 2.25 in (58 mm)
- 3.88 in (98 mm)
- 5.13 in (130 mm)
- 8.69 in (221 mm)
- Unlabeled dimensions
- 0.63 in (16 mm) and 2.19 in (55 mm), printed without labels on the drawing
- Mounting
- Ceiling or wall mounting of the bracket, with the ceiling mount shown
- Chain tensioner
- Wall or floor mounted
- Clearances
- Factory-supplied shades have the clearances they need
- The installer keeps them once adjustment features are used
- Not every adjustment is available at maximum roll diameter
- Title block
- Product: Contract Roller Manual
- Sheet title: ceiling mount dual shade (right clutch) in recessed pocket
- CHR-C, 085375, scale 1/3, view 1, revision B
Questions about document 085375
The answers come from Lutron document 085375 and New Way's record of it.
What is Lutron document 085375?
Lutron's one-page section drawing titled "ceiling mount dual shade (right clutch) in recessed pocket", view 1 under code CHR-C.
Which revision of 085375 is current?
Rev B is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085375 cover?
Lutron Manual roller shades in the Commercial Contract Manual drive class.
How big must the ceiling pocket be for the dual manual shade?
Lutron document 085375 shows a pocket 7.00 in (178 mm) deep and 11.00 in (279 mm) high. Lutron adds a pocket flap of 2.00 in (51 mm).
Where do the two tubes sit inside the pocket?
Lutron document 085375 locates the two tubes with four tube center dimensions.
- 2.25 in (58 mm) and 3.88 in (98 mm)
- 5.13 in (130 mm)
- 8.69 in (221 mm)
Can the bracket wall mount, and where does the tensioner go?
Lutron's note on drawing 085375 says the bracket supports ceiling or wall mounting, with the ceiling mount drawn. Lutron states that the chain tensioner can be mounted on the wall or the floor.
Which tube sizes and fabric roll-ups does the pocket section allow?
Lutron document 085375 shows a Ø1.75 in (44 mm) tube with an optional Ø2.56 in (65 mm) tube. Lutron gives a maximum roll-up of Ø3.35 in (85 mm) for each of the two shades.
What must the installer watch when using the bracket adjustments?
Lutron document 085375 states that a shade installed as supplied from the factory has the clearances it needs. Lutron makes the installer responsible for those clearances once adjustment features are used.
Some adjustments are not available at maximum roll diameter.
Other Manual Commercial Contract Manual CAD drawings
CAD drawings for the same Manual Commercial Contract Manual drive class:
All 20 Manual roller shade CAD drawingsDocuments used with 085375
Lutron document 085373 is the single manual shade pocket section, 085635 the dual shade with fascia and back cover. Lutron document 085380 is the motorized dual shade pocket section, and 085376 the other clutch arrangement of this one.
Revisions of 085375
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| B | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085375, and what to read next
Lutron drawing 085375 gives one section view, without shade widths, fabric, bracket spacing, fastener sizes or the pocket's construction.
Publisher and citation for document 085375
Lutron Electronics Co., Inc. publishes document 085375, Rev B, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron is a trademark of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Manual roller shades?
New Way supplies and installs Lutron Manual roller shades in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085375 filled in.
