You searched and this document matched it.
See all resultsCAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Manual Clutch CAD Drawing: V16, 4.75″ Pocket Mount (Section)
Lutron's CAD section of the V16 manual roller clutch in a pocket mount, drawn at a scale of 1/1.
Lutron, Manual Clutch CAD Drawing: V16, 4.75 in. Pocket Mount. https://assets.lutron.com/a/documents/0185-v16m-pmt-s.pdf, via https://newwaykl.com/resources/lutron/roller-shades/manual/lutron-manual-clutch-cad-drawing-v16-4-75-pocket-mount-section/
About this Manual drawing
Lutron drawing 0185-V16M-PMT-S, Rev A, is the one-page Typical Section, view 1: the pocket outline in section with five unlabeled inch dimensions, the roll with its maximum diameter and the V16 clutch.
What this Manual drawing covers
This Manual drawing has these five sections.
- View 1, Typical Section, scale 1/1
- Pocket outline with inch dimensions
- Maximum roll diameter
- V16 clutch
- Title block: Roller Shade Detail Drawing
Specifications in this Manual drawing
This Manual drawing prints six values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Horizontal dimension at the top, full line, no label on the sheet
- 4.75 in
- Horizontal dimension at the top, shorter line at the left, no label on the sheet
- 1.02 in
- Vertical dimension at the right, no label on the sheet
- 5.00 in
- Dimension at the lower left, no label on the sheet
- 0.52 in
- Horizontal dimension at the bottom, no label on the sheet
- 3.00 in
- Max roll dia
- Ø3.50 (no unit printed on this line)
Facts Lutron states in this Manual drawing
The values this Manual drawing states, as published:
- Drawing number on the sheet
- 0185-V16M-PMT-S, revision A, printed in the title block
- View and scale
- View 1, Typical Section, scale 1/1
- Max roll dia
- Ø3.50, with no unit printed on this line, unlike every other dimension
- Top horizontal dimensions, unlabeled
- 4.75 in on the full line and 1.02 in on the shorter line at the left
- Right vertical dimension, unlabeled
- 5.00 in
- Lower left dimension, unlabeled
- 0.52 in
- Bottom horizontal dimension, unlabeled
- 3.00 in
- Units
- Inches only, with no metric values printed
- File formats
- PDF (about 86 KB), DWG and DXF
- Copyright line
- 2010, Lutron Electronics Co., Inc.
Questions about this Manual drawing
The answers come from this Manual drawing and New Way's record of it.
What is Lutron drawing 0185-V16M-PMT-S?
Lutron's one-page Roller Shade Detail Drawing, supplied as PDF (about 86 KB), DWG and DXF under a 2010 copyright line.
Which revision of this Manual drawing is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does this Manual drawing cover?
Lutron Manual roller shades in the Clutch drive class.
Which dimensions does the sheet print?
Lutron drawing 0185-V16M-PMT-S prints five unlabeled dimensions, in inches only.
- Across the top: 4.75 in and 1.02 in
- Down the right side: 5.00 in
- Lower left and bottom: 0.52 in and 3.00 in
What is the maximum roll diameter?
Lutron labels a maximum roll diameter of Ø3.50 on drawing 0185-V16M-PMT-S. The line prints no unit, while every other dimension on the sheet is in inches.
Is there a V24 version of the same pocket mount drawing?
Yes: Lutron publishes a separate one-page section of the V24 manual clutch in a 4.75 in pocket mount. The V16 clutch also has 3 in and 4 in fascia sections, Lutron drawings 0177-V16M-SFM-S and 0181-V16M-SFM-S.
Which documents go with this Manual drawing?
Three documents go with this Manual drawing, listed under Documents used with this Manual drawing:
Other Manual Clutch CAD drawings
CAD drawings for the same Manual Clutch drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| Clutch CAD Drawing: V24, 4.75″ Pocket Mount (Section) | Clutch | A | |
| Clutch CAD Drawing: V16, 3″ Fascia Mount (Section) | Clutch | A | |
| Clutch CAD Drawing: V16, 4″ Fascia Mount (Section) | Clutch | A | |
| Clutch CAD Drawing: V16, Dual Ceiling-Mount (Section) | Clutch | A |
Documents used with this Manual drawing
Lutron drawings 0177-V16M-SFM-S (3 in fascia) and 0181-V16M-SFM-S (4 in fascia) are the fascia sections of the same V16 clutch. Lutron guide 045971 mounts the manual clutch shade without a fascia, and submittal 085608 is the manual clutch specification.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045971Sivoia QS Manual Clutch Shade Installation Guide | Installation Guide | A | Apr 2024 |
| 085608Clutch Specification Submittal | Specification Submittal | B | Apr 2024 |
| 048863Sivoia QS Roller Shades Application Note: Fabric Aesthetic Characteristics | Application Note | A | May 2026 |
Revisions of this Manual drawing
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in this Manual drawing, and what to read next
Lutron drawing 0185-V16M-PMT-S prints no metric values, no tube sizes and no mounting steps.
Publisher and citation for this Manual drawing
Lutron Electronics Co., Inc. publishes this document and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron is a trademark of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Manual roller shades?
New Way supplies and installs Lutron Manual roller shades in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
