You searched and this document matched it.
See all resultsCAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Manual Clutch CAD Drawing: V16, 4″ Fascia Mount (Section)
Lutron's CAD section of the V16 manual roller clutch in a 4-inch fascia mount, drawn at a scale of 1/1.
Lutron, Manual Clutch CAD Drawing: V16, 4 in. Fascia Mount. https://assets.lutron.com/a/documents/0181-v16m-sfm-s.pdf, via https://newwaykl.com/resources/lutron/roller-shades/manual/lutron-manual-clutch-cad-drawing-v16-4-fascia-mount-section/
About this Manual drawing
Lutron drawing 0181-V16M-SFM-S, Rev A, is the one-page Typical Section, view 1: the fascia profile around the roll, the V16 clutch, three labeled tubes, the maximum roll and the hembar, marked as varying.
What this Manual drawing covers
This Manual drawing has these seven sections.
- View 1, Typical Section, scale 1/1
- Fascia profile with its dimensions
- Maximum roll diameter
- S11, S14 and A16 tubes with diameters
- V16 clutch
- Hembar (varies)
- Title block: Roller Shade Detail Drawing
Specifications in this Manual drawing
This Manual drawing prints eight values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Horizontal dimension at the top, outer line, no label on the sheet
- 4.2 in (107 mm)
- Horizontal dimension at the top, inner line, no label on the sheet
- 4.0 in (102 mm)
- Max roll
- Ø3.5 in (89 mm)
- Vertical dimension at the left, no label on the sheet
- 4.2 in (107 mm)
- Vertical dimension at the right, no label on the sheet
- 4.1 in (104 mm)
- S11 tube
- Ø1.4 in (35 mm)
- S14 steel tube
- Ø1.8 in (44 mm)
- A16 alum tube
- Ø2.0 in (51 mm)
Facts Lutron states in this Manual drawing
The values this Manual drawing states, as published:
- Drawing number on the sheet
- 0181-V16M-SFM-S, revision A, printed in the title block
- View and scale
- View 1, Typical Section, scale 1/1
- Max roll
- Ø3.5 in (89 mm)
- S11 tube
- Ø1.4 in (35 mm)
- S14 steel tube
- Ø1.8 in (44 mm)
- A16 alum tube
- Ø2.0 in (51 mm)
- Top horizontal dimensions, unlabeled
- 4.2 in (107 mm) on the outer line and 4.0 in (102 mm) on the inner line
- Vertical dimensions, unlabeled
- 4.2 in (107 mm) at the left and 4.1 in (104 mm) at the right
- File formats
- PDF (about 138 KB), DWG and DXF
- Copyright line
- 2010, Lutron Electronics Co., Inc.
Questions about this Manual drawing
The answers come from this Manual drawing and New Way's record of it.
What is Lutron drawing 0181-V16M-SFM-S?
Lutron's one-page Roller Shade Detail Drawing, supplied as PDF (about 138 KB), DWG and DXF under a 2010 copyright line.
Which revision of this Manual drawing is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does this Manual drawing cover?
Lutron Manual roller shades in the Clutch drive class.
What is the maximum roll diameter in the 4 in fascia?
Lutron labels a maximum roll of Ø3.5 in (89 mm) on drawing 0181-V16M-SFM-S.
Which tubes does the sheet draw inside the roll?
Lutron drawing 0181-V16M-SFM-S labels three tubes inside the roll, without saying which suits which shade size.
- S11 tube: Ø1.4 in (35 mm)
- S14 steel tube: Ø1.8 in (44 mm)
- A16 alum tube: Ø2.0 in (51 mm)
Is there a 3 in fascia version of the same drawing?
Yes: Lutron drawing 0177-V16M-SFM-S is the section of the same V16 clutch in a 3-inch fascia mount. Lutron drawing 0185-V16M-PMT-S shows the V16 clutch in a 4.75 in pocket mount.
Which documents go with this Manual drawing?
Three documents go with this Manual drawing, listed under Documents used with this Manual drawing:
Other Manual Clutch CAD drawings
CAD drawings for the same Manual Clutch drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| Clutch CAD Drawing: V24, 4″ Fascia Mount (Section) | Clutch | A | |
| Clutch CAD Drawing: V16, 3″ Fascia Mount (Section) | Clutch | A | |
| Clutch CAD Drawing: V8, 3″ Fascia Mount (Section) | Clutch | A | |
| Clutch CAD Drawing: V16, 4.75″ Pocket Mount (Section) | Clutch | A |
Documents used with this Manual drawing
Lutron drawings 0177-V16M-SFM-S (3 in fascia) and 0185-V16M-PMT-S (4.75 in pocket) are the other V16 clutch sections. Lutron guide 045973 mounts the manual clutch shade with a fascia, and submittal 085608 is the manual clutch specification.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045973Sivoia QS Manual Clutch Shade with Fascia Installation Guide | Installation Guide | A | Apr 2024 |
| 085608Clutch Specification Submittal | Specification Submittal | B | Apr 2024 |
| 048863Sivoia QS Roller Shades Application Note: Fabric Aesthetic Characteristics | Application Note | A | May 2026 |
Revisions of this Manual drawing
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in this Manual drawing, and what to read next
Lutron drawing 0181-V16M-SFM-S labels no bracket, fixing or end cap and prints no mounting steps.
Publisher and citation for this Manual drawing
Lutron Electronics Co., Inc. publishes this document and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron is a trademark of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Manual roller shades?
New Way supplies and installs Lutron Manual roller shades in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
