Lutron Sivoia QS 30-Output Configurable Power Panel Enclosure (Power Modules sold separately), 35V Output Specification Submittal (085592, rev B)

Facts Lutron states in 085592

The values Lutron document 085592 states, as published:

Capacity

• Three sub-plates, each plug-in ready for two 5-output WIN-PS-5CC-R modules
• Thirty outputs when six modules are fitted
• The NPM model ships with empty module positions

Input

120 V~ to 240 V~, 50/60 Hz, 10 A per 10-output sub-plate

Circuit protection

• 15 A breaker per 10-output sub-plate (16 A in some countries), set by inrush
• Three feeds: one per sub-plate at 15 A or 20 A
• Two feeds: two sub-plates share a 20 A breaker
• Two feeds: the third sub-plate takes 15 A or 20 A
• Feed options drawn as a diagram on page 2

Each output

35 V DC, 143 mA, 5 W, NEC Class 2 / PELV, with a WIN-PS-5CC-R installed

Devices per output

One Sivoia QS shade or drapery drive unit, or as many as 8 QS power draw units

Input wiring

• 14 AWG to 10 AWG (2.5 mm² to 4.0 mm²), solid or stranded
• Screws torqued to 5 in-lbs (0.5 N·m)
• Insulation stripped 5/16 in (8 mm)

Output wiring

• 22 AWG to 12 AWG (0.5 mm² to 4.0 mm²)
• Screws torqued to 5 in-lbs (0.5 N·m)
• Insulation stripped 1/4 in (6 mm)
• Thirty 4-conductor output blocks and six 3-conductor link blocks

Conductor sizes at terminals

• V+ and COM: 12 AWG to 18 AWG (4.0 mm² to 1.0 mm²)
• MUX pair: 22 AWG (0.5 mm²), twisted and shielded
• Link terminals take the same COM and MUX sizes

Environment

• 32 °F to 104 °F (0 °C to 40 °C)
• 0% to 90% non-condensing humidity, indoor use only
• Thermal dissipation: 60 BTU/hr with one window treatment and keypad per output
• Thermal dissipation at 5 W per output: 156 BTU/hr

Protection

• Surge: plus or minus 6 kV (ANSI/IEEE C62.41-1991)
• ESD: plus or minus 16 kV air discharge
• Short circuit, miswire, overload, over temperature: self-recovering per output
• No replaceable fuses

Approvals

• cULus Listed, RoHS
• FCC Part 15 Subpart B Class B, ICES 003 Class B
• Power supplies inside: U.S. Department of Energy Level VI
• NOM certification pending at this revision

Size, weight and mounting

• 59.5 in (1511 mm) high
• Weight 55 lb (24.9 kg)
• Surface or recess mounted, vertically within plus or minus 7 degrees

Run

one drive, one PDU: - 500 ft (152 m) on 12 AWG, not accepted by the Palladiom connector

• 200 ft (61 m) on 16 AWG
• 125 ft (38 m) on 18 AWG

Run

two Roller 64 shades: Each up to 30 sq ft (2.75 sq m) plus up to one PDU on one output:

• 200 ft (61 m) on 12 AWG
• 75 ft (23 m) on 16 AWG
• 50 ft (15 m) on 18 AWG

System limits

• Communication link not over 2000 ft (610 m)
• Maximum 100 devices per system, each module-equipped sub-plate counting as one
• Enclosures interconnect through the 3-pin link terminals only