You searched and this document matched it.
See all results085532 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Roller 20 CAD Drawing: 2.75″ Square Fascia with Top Back Cover, Section View (085532)
Lutron's section drawing of the Sivoia QS Roller 20 shade with the 2.75 in top back cover and square fascia.
Lutron 085532 Rev A, Sivoia QS Roller 20 CAD Drawing: 2.75 in. Square Fascia with Top Back Cover, Section View. https://assets.lutron.com/a/documents/085532.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-20-cad-drawing-085532/
About document 085532
Lutron drawing 085532, revision A, is the section, view 1 at 3/4 scale: fascia and top back cover height and depth, tube and roll-up diameters, tube center, and the mounting and clearance notes.
What drawing 085532 covers
Lutron document 085532 has these eight sections, all on its one page.
- Section view
- Legend (top view) with markers 1 and 2
- Mounting note with the wall mount shown
- Clearance note on factory and installer-adjusted clearances
- Title block with scale, view and revision
- Tube diameter, tube center and roll-up callouts
- Fascia and top back cover callouts
- Hembar, glazing and wall fastener callouts
Specifications in 085532
Lutron document 085532 prints 20 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Tube diameter
- 1.28 in (33 mm)
- Fascia and top back cover height
- 2.81 in (72 mm)
- Max rollup
- 2.40 in (61 mm) diameter
- Tube center
- 1.44 in (37 mm)
- Fascia and top back cover depth
- 2.81 in (71 mm)
- Tube center
- 1.44 in (37 mm)
- Fascia depth
- 1.69 in (43 mm)
- Unlabeled dimension
- 0.25 in (6 mm)
- Hembar
- Varies
- Glazing
- Typical
- Fixings labeled
- Wall fasteners
Drawing title
PDF page 1 of 085532, opens in a new tab- Top back cover named
- 2.75 in, inches only
- Square fascia named
- 2.75 in, inches only
- Mounting configurations allowed
- Ceiling, wall or jamb; wall mount shown
- Shade installed as supplied by the factory
- Has the clearances it needs to operate
- Adjustments at maximum roll diameter
- Not all available
title block
PDF page 1 of 085532, opens in a new tab- Drawing number
- 085532
- Scale
- 3/4
- View
- 1
- Revision
- A
Facts Lutron states in 085532
The values Lutron document 085532 states, as published:
- Subject
- Roller 20 fascia mount shade with 2.75 in top back cover and 2.75 in square fascia, section view
- Title sizes
- Both 2.75 in sizes are printed in inches only
- Fascia and top back cover
- Height 2.81 in (72 mm), depth 2.81 in (71 mm), as printed
- Fascia depth
- 1.69 in (43 mm)
- Tube
- Diameter 1.28 in (33 mm)
- Maximum roll-up
- 2.40 in (61 mm) diameter
- Tube center
- 1.44 in (37 mm), printed twice, without saying which face each is measured from
- Other callouts
- 0.25 in (6 mm) unlabeled
- Hembar marked as varying, glazing shown as typical
- Wall fasteners labeled
- Mounting
- Ceiling, wall or jamb mounting per Lutron's note, with the wall mount shown
- Clearances
- A shade installed as the factory supplies it has the clearances it needs for proper operation
- Clearances after adjustment
- The installer keeps proper clearances once the adjustment features are used
- Adjustments at maximum roll
- Not every adjustment is available at the maximum roll diameter
- Scale, view and revision
- 3/4 scale, view 1, revision A, no date printed
- File formats
- PDF, DWG and DXF
- Not on the drawing
- Minimum shade width and height, a light gap and fastener sizes are not printed
Questions about document 085532
The answers come from Lutron document 085532 and New Way's record of it.
What is Lutron document 085532?
Lutron's section drawing of the Sivoia QS Roller 20 shade with the 2.75 in top back cover and square fascia. Lutron drawing 085532, revision A, is the section, view 1 at 3/4 scale: fascia and top back cover height and depth, tube and roll-up diameters, tube center, and the mounting and clearance notes.
Which revision of 085532 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085532 cover?
Lutron Sivoia QS roller shades in the Roller 20 drive class.
How much space do the fascia and top back cover take?
Lutron drawing 085532 prints three fascia and top back cover sizes.
- Height: 2.81 in (72 mm)
- Depth: 2.81 in (71 mm)
- Fascia alone, depth: 1.69 in (43 mm)
Which fascia does drawing 085532 show?
Lutron's title names a 2.75 in square fascia and a 2.75 in top back cover on a Roller 20 shade. Lutron prints both 2.75 in sizes in inches only.
What tube and roll-up diameters does the Roller 20 section show?
Lutron drawing 085532 shows a 1.28 in (33 mm) tube and a maximum roll-up of 2.40 in (61 mm).
Does drawing 085532 give a minimum shade size or light gap?
No. Lutron drawing 085532 prints no minimum shade width or height and no light gap.
Lutron drawing 085536 is the elevation view of the Roller 20 fascia mount shade with fascia brackets.
Can the fascia bracket mount to the ceiling or a jamb?
Yes. Lutron's note on drawing 085532 says the bracket supports ceiling, wall or jamb mounting.
The section shows the wall mount with wall fasteners.
Other Sivoia QS Roller 20 CAD drawings
CAD drawings for the same Sivoia QS Roller 20 drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085539Roller 20 CAD Drawing: Fascia Shade Bracket, Detail Drawing | Roller 20 | A | |
| 085561Roller 20 CAD Drawing: Shade in 3.5″ (89mm) Pocket, Section View | Roller 20 | A | |
| 085536Roller 20 CAD Drawing: Shade Mount with Fascia Brackets, Elevation View | Roller 20 | A | |
| 085538Roller 20 CAD Drawing: Universal Shade Bracket, Detail Drawing | Roller 20 | A |
Documents used with 085532
Lutron drawing 085536 is the elevation, 085561 the 3.5 in pocket section, 085539 and 085538 the fascia and universal brackets. Lutron document 045617 is the Roller 20/64 fascia mount chassis installation guide and 086112 the Roller 20 specification submittal.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045617Roller Shades Installation Guide: Roller 20/64, Fascia Mount Chassis | Installation Guide | A | Apr 2018 |
| 086112Roller 20 Specification Submittal | Specification Submittal | A | Jun 2026 |
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| 369847Pico Wireless Control, 4-Button Specification Submittal | Specification Submittal | K | Mar 2024 |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 085274Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 048863Roller Shades Application Note: Fabric Aesthetic Characteristics | Application Note | A | May 2026 |
| 0454114-Group RF Remote Control Installation Guide | Installation Guide | D | Jan 2015 |
| 045520Basic Wiring and Setup Installation Guide | Installation Guide | B | Nov 2016 |
Revisions of 085532
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085532, and what to read next
Lutron drawing 085532 gives the section only: no minimum shade width or height, light gap or fastener size.
Publisher and citation for document 085532
Lutron Electronics Co., Inc. publishes document 085532, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085532 filled in.
