You searched and this document matched it.
See all results086112 · Specification Submittal · Rev A · Jun 2026 · English · PDF, 11 pages, 2.3 MB
Lutron Sivoia QS Roller 20 Specification Submittal (086112, rev A)
Lutron's specification submittal for the Roller 20, a Sivoia QS roller shade carrying up to 20 ft² (1.86 m²) of fabric.
Lutron 086112 Rev A (June 2026), Sivoia QS Roller 20 Specification Submittal. https://assets.lutron.com/a/documents/r20_chassis_spec.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-20-specification-submittal-086112/
About document 086112
Lutron document 086112, Rev A of June 2026, is the Roller 20 chassis specification submittal: performance figures, Class 2 35 V DC power and supplies, system capacity, listings, controls and brackets.
What submittal 086112 covers
Lutron document 086112 has these 14 sections. Each link opens the PDF at that page in a new tab.
- Features and specifications, opens in a new tab page 1
- Low voltage power and compatible power sources, opens in a new tab page 2
- Flexible configuration, opens in a new tab page 2
- System capacity, opens in a new tab page 2
- Regulatory listings, opens in a new tab page 2
- Precision control, control systems and integration, opens in a new tab page 2
- Shade options, opens in a new tab page 3
- Universal bracket: pocket and mounting options, opens in a new tab page 4
- Universal bracket: installed system and light gaps, opens in a new tab page 5
- Dual-mount bracket: pocket and mounting options, opens in a new tab page 6
- Dual-mount bracket: installed system, opens in a new tab page 7
- Fascia-mount bracket: section view, opens in a new tab page 8
- Fascia-mount bracket: installed system, opens in a new tab page 9
- QS Wired and QS Wireless single drive wiring, opens in a new tab page 10
Specifications in 086112
Lutron document 086112 prints 66 values in the groups the document uses, each with the document's unit. A row names the catalog codes it applies to. The page link beside each group opens the PDF where the group starts.
Features and Specifications
PDF page 1 of 086112, opens in a new tab- Light gap, each side
- 0.75 in (19 mm) between the fabric and the outside edges of the brackets; symmetrical
- High aspect ratio (tall, narrow) shades
- Lutron may apply a fabric deduction, which widens the light gaps
- Maximum shade fabric per drive
- 20 ft² (1.86 m²)
- Noise
- 44 dBA maximum, measured 3 ft (1 m) from the EDU
- Supply cable
- QS Wired: low-voltage power and communication in one 4-wire cable; QS Wireless: low-voltage power in one 2-wire cable
- Bottom bar speed
- 3.6 in/s (91.4 mm/s)
- Alignment between shades
- Within 1/8 in (3 mm) at all times
- Power failure memory
- For the lifetime of the product
Low Voltage Power
PDF page 2 of 086112, opens in a new tab- Operating voltage
- Class 2, 35 V DC
- Power source
- Lutron NEC Class 2 power supply, with overvoltage protection of +/-10% of line voltage and ESD protection for all devices
- Power failure protection
- Shade programming kept if drive power is lost
Compatible Power Sources
PDF page 2 of 086112, opens in a new tab- Individual plug-in
- QSPS-P1-1-35V, QSPS-P2-1-35V, QSPS-P3-1-35V, QSPS-P4-1-35VModels: QSPS-P1-1-35V, QSPS-P2-1-35V, QSPS-P3-1-35V, QSPS-P4-1-35V
- 10-output power panels
- QSPS-10PNL, QSPSY-10PNLModels: QSPS-10PNL, QSPSY-10PNL
- Configurable power panels
- QSPS-10PNL-NPM, QSPS-30PNL-NPM, each with WIN-PS-5CC-R installedModels: QSPS-10PNL-NPM, QSPS-30PNL-NPM, WIN-PS-5CC-R
- Individual junction box
- QSPS-J-1-35VModels: QSPS-J-1-35V
Flexible Configuration
PDF page 2 of 086112, opens in a new tab- Local limit adjustment
- Buttons on the EDU
- Remote limits and grouping, QS shades
- Wired controls or Athena, HomeWorks QSX, myRoom XC, Quantum
- Remote limits and grouping, QS Wireless shades
- HomeWorks QSX, myRoom, myRoom XC, RadioRA 2, RA2 Select, RadioRA 3, Caséta PRO
- Wired relays or group controllers
- None required
System Capacity
PDF page 2 of 086112, opens in a new tab- Standalone QS configuration
- 100 QS devices; 100 QS zones
Regulatory
PDF page 2 of 086112, opens in a new tab- Listings and marks
- cULus listed (E135084); NOM; CE; UKCA
Environment
PDF page 2 of 086112, opens in a new tab- Temperature and humidity
- 32 °F to 104 °F (0 °C to 40 °C); 0% to 90% humidity, non-condensing
Precision Control
PDF page 2 of 086112, opens in a new tab- Preset positions
- Anywhere between the open and close limits
- Stopping accuracy
- Within 1/8 in (3 mm) of programmed open, close and preset positions
- Intelligent Hembar Alignment (IHA)
- Within 1/8 in (3 mm), stopped or moving
- QS shade control systems
- Athena, HomeWorks QS, HomeWorks QSX, Quantum, myRoom, myRoom XC; Radio Window sensors when part of a HomeWorks QS or Quantum system
- QS Wired local controls
- GRAFIK Eye QS shade columns or low-voltage QS keypads, on the same communications link
- QS Wireless control systems
- HomeWorks QSX, myRoom, myRoom XC, RadioRA 2, RA2 Select, RadioRA 3, Caséta PRO; local control by Pico, 4-Group Handheld Remote Control or QS Wireless keypads
Integration
PDF page 2 of 086112, opens in a new tab- Third-party integration
- Contact closure, RS232 and ethernet
Shade Options
PDF page 3 of 086112, opens in a new tab- Mounting
- Inside the window frame, outside the window frame, or in a pocket
- Drive side
- Left or right
- Fabric drop
- Regular roll or reverse roll
- Bottom bars
- Designer (standard); sealed; half-wrap architectural with plastic endcaps; exposed architectural; 1 in (25 mm) exposed; the last three in white, black, bronze, silver or custom color
- Bottom bar concealment
- Top treatments, pockets and fascia do not fully conceal the bottom bar; the upper limit is set so the bottom bar is not drawn into the pocket or brackets
- Sealed bottom bar sizes
- 3/16 x 1 in (5 x 25 mm) or 7/16 x 1 3/8 in (11 x 35 mm)
- Fabric types
- Light filtering: UV protection, high transparency, openness factor 1% or higher; blackout: maximum UV protection, 0% openness factor, blocks 100% of daylight
Universal Bracket
PDF page 4 of 086112, opens in a new tab- Bracket view, printed values
- 0.93 in (24 mm); 1.65 in (42 mm); 1.28 in (33 mm)
- Maximum rollup and projection view, printed values
- Max. 2.58 in (65 mm); max. 2.40 in (61 mm); 1.28 in (33 mm); 1.28 in (32 mm); min. 0.18 in (5 mm)
- Pocket installation view, printed values
- 3.50 in (89 mm); 3.50 in (89 mm); 2.38 in (60 mm)
- Pocket and endcap colors
- White, silver, bronze, black
- Endcap for wall or ceiling mount
- Outside mount only; white only
Universal Bracket: Installed System
PDF page 5 of 086112, opens in a new tab- Drive end and idler end light gaps
- 0.75 in (19 mm) each
- Nominal light gap at the ordered bracket-to-bracket distance
- 3/4 in (19 mm); may not apply to custom light gaps
Dual-Mount Bracket
PDF page 6 of 086112, opens in a new tab- Use
- Two fabric rolls in the same window, typically a sheer and a blackout
- Bracket view, printed values
- 2.31 in (59 mm); 3.50 in (89 mm); 5.03 in (128 mm)
- Maximum rollup and projection view, printed values
- Max. 3.64 in (93 mm); max. 2.40 in (61 mm)
- Pocket installation view, printed values
- 5.00 in (127 mm); 6.25 in (159 mm); 2.89 in (73 mm)
- Dual pocket and endcap colors
- White, silver, bronze, black
Dual-Mount Bracket: Installed System
PDF page 7 of 086112, opens in a new tab- Drive end and idler end light gaps
- 0.75 in (19 mm) each
Fascia-Mount Bracket
PDF page 8 of 086112, opens in a new tab- Bracket size
- 3.5 in (88.9 mm)
- Bracket view, printed values
- 1.00 in (25 mm); 2.68 in (68 mm); 2.68 in (68 mm)
Fascia System: Section View
PDF page 8 of 086112, opens in a new tab- Printed values
- 2.81 in (71 mm), twice; deduct 0.07 in (2 mm) from each without the top back cover
- Inside mount deduction
- 3/8 in (10 mm) off the bracket-to-bracket distance; not applied automatically in the ordering tool
- Fascia and endcap colors
- White, gray, bronze, black
Fascia-Mount Bracket: Installed System
PDF page 9 of 086112, opens in a new tab- Drive end and idler end light gaps
- 0.75 in (19 mm) each
- Minimum light gap, inside mount with endcaps
- 15/16 in (23.8 mm)
QS Wired Single Drive Wiring
PDF page 10 of 086112, opens in a new tab- Wire type A, keypad power and communication
- 18 to 22 AWG (1.0 to 0.5 mm²), 250 ft (75 m) maximum; MUX/MUX twisted pair, shieldedModels: GRX-CBL-346S-500
- Wire type B, drive power, 12 AWG option
- 12 AWG (4.0 mm²), 250 ft (75 m) max
- Wire type B, drive power, 16 AWG option
- 16 AWG (1.5 mm²), 100 ft (30 m) max; Lutron cable QSHY-CBL-M-1000 (non-plenum) or QSHY-CBLP-M-1000 (plenum)Models: QSHY-CBL-M-1000, QSHY-CBLP-M-1000
- Wire type B, drive power, 18 AWG option
- 18 AWG (1.0 mm²), 50 ft (17 m) max
- Power supply plugs
- NEMA 5-15 (P1), CEE 7/7 (P2), BS 1363 (P3), JIS C 8303 (P4)Models: QSPS-P1-1-35V, QSPS-P2-1-35V, QSPS-P3-1-35V, QSPS-P4-1-35V
QS Wireless Single Drive Wiring
PDF page 11 of 086112, opens in a new tab- Wire type A, drive power, 12 AWG option
- 12 AWG (4.0 mm²), 250 ft (75 m) max
- Wire type A, drive power, 16 AWG option
- 16 AWG (1.5 mm²), 100 ft (30 m) max; Lutron cable QSHY-CBL-M-1000 (non-plenum) or QSHY-CBLP-M-1000 (plenum)Models: QSHY-CBL-M-1000, QSHY-CBLP-M-1000
- Wire type A, drive power, 18 AWG option
- 18 AWG (1.0 mm²), 50 ft (17 m) max
- Terminals 3 and 4
- Wired communication only; not used in wireless installations
- RF receiver
- Drive RF and RF receiver connectors pre-wired; QS Wireless only
Facts Lutron states in 086112
The values Lutron document 086112 states, as published:
- Maximum fabric per drive
- 20 ft² (1.86 m²)
- Light gap
- 0.75 in (19 mm) between the fabric and the outside edge of the brackets on each side, symmetrical. Lutron may widen it on tall, narrow shades
- Noise
- No more than 44 dBA at 3 ft (1 m) from the drive
- Bottom bar speed
- 3.6 in/s (91.4 mm/s)
- Precision
- Shades stop within 1/8 in (3 mm) of programmed positions and hold alignment within 1/8 in (3 mm) moving or stopped
- QS Wired
- Low-voltage power and communication in one 4-wire cable
- QS Wireless
- Low-voltage power in one 2-wire cable, with an RF receiver on pre-wired drive RF and RF receiver connectors
- Operating voltage
- Class 2, 35 V DC from a Lutron NEC Class 2 power supply. Programming survives power loss
- Compatible power sources
- Plug-in: QSPS-P1-1-35V, QSPS-P2-1-35V, QSPS-P3-1-35V, QSPS-P4-1-35V
- 10-output panels: QSPS-10PNL, QSPSY-10PNL
- Configurable panels: QSPS-10PNL-NPM, QSPS-30PNL-NPM, with WIN-PS-5CC-R
- Junction box: QSPS-J-1-35V
- System capacity
- A standalone QS system supports 100 QS devices and 100 QS zones
- Listings
- cULus listed (E135084), NOM, CE and UKCA
- Operating environment
- 32 °F to 104 °F (0 °C to 40 °C), 0 to 90% humidity non-condensing
- Bottom bar options
- Designer (standard)
- Sealed, 3/16 x 1 in (5 x 25 mm) or 7/16 x 1 3/8 in (11 x 35 mm)
- Half-wrap architectural
- Exposed architectural
- 1 in (25 mm) exposed
- Bracket options
- Universal bracket
- Dual-mount bracket, two fabric rolls in one window
- 3.5 in (88.9 mm) fascia-mount bracket
- Pockets and endcaps in white, silver, bronze or black
- Fascia in white, gray, bronze or black
- Fascia inside mount deduction
- Remove 3/8 in (10 mm) from the bracket-to-bracket distance for endcaps and clearance. The ordering tool does not apply it, and the minimum light gap with endcaps is 15/16 in (23.8 mm)
- Drive power wire
- 12 AWG (4.0 mm²) up to 250 ft (75 m)
- 16 AWG (1.5 mm²) up to 100 ft (30 m)
- 18 AWG (1.0 mm²) up to 50 ft (17 m)
- Keypad power and communication
- 18 to 22 AWG (1.0 to 0.5 mm²) up to 250 ft (75 m)
Questions about document 086112
The answers come from Lutron document 086112 and New Way's record of it.
What is Lutron document 086112?
Lutron's 11-page Roller 20 specification submittal, dated 19 June 2026 on every page under part number 086112a.
Which revision of 086112 is current?
Rev A, dated June 2026, is the revision Lutron publishes. New Way checked it against assets.lutron.com on 15 October 2026.
Which roller shades does 086112 cover?
Lutron Sivoia QS roller shades in the Roller 20 drive class.
How much fabric can one Roller 20 drive carry?
Up to 20 ft² (1.86 m²) of fabric per drive, per Lutron document 086112. The bottom bar moves at 3.6 in/s (91.4 mm/s) with noise no higher than 44 dBA at 3 ft (1 m).
Which listings and system capacity does the Roller 20 carry?
Lutron document 086112 lists the Roller 20 as cULus listed (E135084) with NOM, CE and UKCA marks. Lutron gives a standalone QS configuration a capacity of 100 QS devices and 100 QS zones.
How long can the Roller 20 drive power run be?
Up to 250 ft (75 m) on 12 AWG (4.0 mm²) cable, per Lutron document 086112.
- 16 AWG (1.5 mm²): up to 100 ft (30 m)
- 16 AWG cable: QSHY-CBL-M-1000, or QSHY-CBLP-M-1000 in plenum
- 18 AWG (1.0 mm²): up to 50 ft (17 m)
What deduction applies to a fascia inside mount?
Lutron document 086112 removes 3/8 in (10 mm) from the bracket-to-bracket distance of a fascia inside mount. The deduction leaves room for the endcaps and installation clearance.
Lutron warns that the ordering tool skips this deduction; with endcaps the light gap is at least 15/16 in (23.8 mm).
What light gap does a Roller 20 leave?
Lutron document 086112 gives 0.75 in (19 mm) between the fabric and the outside edge of each bracket, drive end and idler end alike. On tall, narrow shades Lutron may deduct fabric, which widens the gaps against telescoping.
Other Sivoia QS specification submittals
Specification submittals for the same Sivoia QS system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 0853144-Group RF Remote Control Specification Submittal | C | May 2016 | |
| 085274Hard Wired Power Supply Specification Submittal | D | Aug 2014 | |
| 369847Pico Wireless Control, 4-Button Specification Submittal | K | Mar 2024 | |
| 369374Roller Shades Specification Submittal: QS Contact Closure Input/Output Interface | H | Apr 2026 |
Documents used with 086112
Lutron documents 045616 and 045617 are the Roller 20 and Roller 64 chassis installation guides for submittal 086112. For bracket mounting, Lutron document 086112 points to the installation guide packed with the shade.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045616Roller Shades Installation Guide: Roller 20/64, Standard Single & Dual Mount Chassis (Universal Bracket) | Installation Guide | A | Apr 2018 |
| 045617Roller Shades Installation Guide: Roller 20/64, Fascia Mount Chassis | Installation Guide | A | Apr 2018 |
| 085532Roller 20 CAD Drawing: 2.75″ Square Fascia with Top Back Cover, Section View | CAD Drawing | A | |
| Roller 20 CAD Drawing: Ceiling Mount, Elevation View | CAD Drawing | A | |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 048863Roller Shades Application Note: Fabric Aesthetic Characteristics | Application Note | A | May 2026 |
| 0454114-Group RF Remote Control Installation Guide | Installation Guide | D | Jan 2015 |
| 045520Basic Wiring and Setup Installation Guide | Installation Guide | B | Nov 2016 |
| 045000710 Output Power Panel Power Supply (12 V) Installation Guide | Installation Guide | A | Jul 2025 |
Revisions of 086112
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Jun 2026 | Current. The file on assets.lutron.com. Checked 15 Oct 2026. |
Not covered in 086112, and what to read next
Lutron document 086112 gives no installation steps, limit setting, programming, or multi-drive or panel wiring diagrams.
Publisher and citation for document 086112
Lutron Electronics Co., Inc. publishes document 086112, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 15 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 086112 filled in.
