You searched and this document matched it.
See all results369847 · Specification Submittal · Rev K · Mar 2024 · English · PDF, 12 pages, 0.8 MB
Lutron Sivoia QS Pico Wireless Control, 4-Button Specification Submittal (369847, rev K)
Lutron's specification submittal for the Pico 4-Button Wireless Remote, a handheld or wall-mounted control for Lutron shades, drapes and lighting.
Lutron 369847 Rev K (March 2024), Sivoia QS Pico Wireless Control, 4-Button Specification Submittal. https://assets.lutron.com/a/documents/369847.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-pico-wireless-control-4-button-specification-submittal-369847/
About document 369847
Lutron document 369847, Rev K of March 2024, is the Pico 4-button specification submittal: compatible systems, radio range and frequency, button layouts, shade compatibility by system, model number code, finishes, engraving, pedestals and mounting accessories.
What submittal 369847 covers
Lutron document 369847 has these twelve sections. Each link opens the PDF at that page in a new tab.
- Features, opens in a new tab page 1
- Specifications: approvals, power, communication, mounting, environment, warranty, opens in a new tab page 2
- Dimensions, opens in a new tab page 3
- Operation: zone controls and shade compatibility, opens in a new tab page 4
- Operation: scene controls, opens in a new tab page 5
- Operation: 2-group controls, opens in a new tab page 6
- Operation: 4-group toggle, opens in a new tab page 7
- Model number: standard icon models, opens in a new tab page 8
- Model number: custom engraving models, opens in a new tab page 9
- Pico pedestal model number and dimensions, opens in a new tab page 10
- Mounting options: adhesive, screw mount and wallbox adapter, opens in a new tab page 11
- Mounting options: metal surface and car visor, opens in a new tab page 12
Specifications in 369847
Lutron document 369847 prints 53 values in the groups the document uses, each with the document's unit. A row names the catalog codes it applies to. The page link beside each group opens the PDF where the group starts.
- Operating voltage
- 3 V DCModels: PJ2-4B-XXX-XXXX
- Battery
- One CR2032, includedModels: PJ2-4B-XXX-XXXX
- Battery life
- 10 years, based on a 1-year shelf life, 10 button presses a day and 86 °F (30 °C) ambientModels: PJ2-4B-XXX-XXXX
- Wiring
- None; no external power or communication wiringModels: PJ2-4B-XXX-XXXX
System Communication and Capacity
PDF page 2 of 369847, opens in a new tab- Radio frequency
- 431 MHz to 437 MHz (Clear Connect RF)Models: PJ2-4B-XXX-XXXX
- Range through walls
- 30 ft (9 m)Models: PJ2-4B-XXX-XXXX
- Range line of sight
- 60 ft (18 m)Models: PJ2-4B-XXX-XXXX
- System addresses
- Thousands, to prevent interference between systemsModels: PJ2-4B-XXX-XXXX
Environment
PDF page 2 of 369847, opens in a new tab- Ambient operating temperature
- 32 °F to 140 °F (0 °C to 60 °C)Models: PJ2-4B-XXX-XXXX
- Relative humidity
- Maximum 90%, non-condensingModels: PJ2-4B-XXX-XXXX
- Location
- Indoor use onlyModels: PJ2-4B-XXX-XXXX
Regulatory Approvals
PDF page 2 of 369847, opens in a new tab- Quality system
- Lutron quality systems registered to ISO 9001Models: PJ2-4B-XXX-XXXX
- Certifications
- FCC (USA), IC (Canada), COFETEL (Mexico), NOM (Mexico), SUTEL (Costa Rica), Anatel (Brazil)Models: PJ2-4B-XXX-XXXX
Dimensions
PDF page 3 of 369847, opens in a new tab- Front view
- 2.6 in (66 mm) and 1.28 in (33 mm)Models: PJ2-4B-XXX-XXXX
- Side view
- 0.34 in (9 mm)Models: PJ2-4B-XXX-XXXX
Mounting Considerations
PDF page 2 of 369847, opens in a new tab- Mounting surface
- Nonmetallic, for proper RF performanceModels: PJ2-4B-XXX-XXXX
- Metal surface kit
- PICO-MOUNT-1-XX-CPN6774, required on a metallic surfaceModels: PICO-MOUNT-1-XX-CPN6774
- Scene control defaults
- 100%, 66%, 33%, 0Models: PJ2-4B-XXX-XXXX
- Save a scene preset
- Press and hold the scene button for 6 secondsModels: PJ2-4B-XXX-XXXX
- Indicator LED
- Flashes on a button press and in programming modeModels: PJ2-4B-XXX-XXXX
- 4-group toggle availability
- HomeWorks, HomeWorks QS, myRoom, myRoom XC, Quantum and Athena systems onlyModels: PJ2-4B-XXX-XXXX
- EL2 and ES2 in RA2 Select and Caséta systems
- Every button can be programmed to any device and level in the Lutron AppModels: PJ2-4B-XXX-XXXX
- myRoom prime shade compatibility
- Zone layout: Serena, Triathlon and Sivoia QS wireless, Sivoia QS wired with a QS sensor module; scene and 2-group layouts: Sivoia QS wireless, Sivoia QS wired with a QS sensor module; 4-group toggle: not listedModels: PJ2-4B-XXX-XXXX
Model Number
PDF pages 8 and 9 of 369847, opens in a new tab- Model number form
- PJ2-4B-XXX-XXXX: frequency/channel code, button configuration code (4-button), color/finish code, button marking codeModels: PJ2-4B-XXX-XXXX
- Frequency/channel code
- J: 431.0 MHz to 437.0 MHzModels: PJ2-4B-XXX-XXXX
- Gloss finish codes
- GWH white, GBL black, GIV ivory, GLA light almondModels: PJ2-4B-XXX-XXXX
- Satin Colors finish codes
- TSW white, TMN black, TBI biscuitModels: PJ2-4B-XXX-XXXX
- Zone control marking codes
- L01 lights, S01 shadesModels: PJ2-4B-XXX-XXXX
- Scene control marking codes
- L31 lights, S31 shadesModels: PJ2-4B-XXX-XXXX
- 2-group control marking codes
- L21 lights, S21 shades, LS21 lights and shadesModels: PJ2-4B-XXX-XXXX
- 4-group toggle marking code
- L41Models: PJ2-4B-XXX-XXXX
- Custom engraving marking codes
- EL1 (zone, lights), ES1 (zone, shades), EL2 (scene, lights), ES2 (scene, shades)Models: PJ2-4B-XXX-XXXX
- Caséta wireless PRO packaging
- Add P after the button marking code; marked on the L01, L31 and L21 codes only; gloss white (WH), black (BL), ivory (IV) or light almond (LA)Models: PJ2-4B-XXX-XXXX
- Bulk packaging
- May be available for 96 or more pieces of one model number; mounting hardware not includedModels: PJ2-4B-XXX-XXXX
- Text per button
- 1 line of text maximum, 9 pt HelveticaModels: PJ2-4B-XXX-XXXX
- Marked value on the engraving drawing
- 0.78 in (20 mm)Models: PJ2-4B-XXX-XXXX
- Marked value on the engraving drawing, two places
- 0.095 in (2 mm)Models: PJ2-4B-XXX-XXXX
Pico Pedestal
PDF page 10 of 369847, opens in a new tab- Model number form
- L-PEDX-XX: capacity code, color code; sold separatelyModels: L-PEDX-XX
- Capacity codes
- 1 single, 2 double, 3 tripleModels: L-PEDX-XX
- Color codes
- WH white, BL black; gloss finish onlyModels: L-PEDX-XX
- Single pedestal (capacity code 1), marked value
- 1.77 in (45 mm)Models: L-PEDX-XX
- Double pedestal (capacity code 2), marked value
- 3.19 in (81 mm)Models: L-PEDX-XX
- Triple pedestal (capacity code 3), marked value
- 4.59 in (117 mm)Models: L-PEDX-XX
- Other marked values
- 2.96 in (75 mm) and 1.46 in (37 mm), unlabelled in the textModels: L-PEDX-XX
Mounting Options
PDF pages 11 and 12 of 369847, opens in a new tab- Adhesive mount
- Included with the remoteModels: PJ2-4B-XXX-XXXX
- Screw mount
- PICO-SM-KIT, sold separately; special screws for more permanent mounting or non-smooth surfacesModels: PICO-SM-KIT
- Wallbox adapter
- PICO-WBX-ADAPT, sold separately; wallplate adapter and wallplate sold separatelyModels: PICO-WBX-ADAPT
- Metal surface mounting
- PICO-MOUNT-1-XX-CPN6774, sold separately through the local Lutron sales officeModels: PICO-MOUNT-1-XX-CPN6774
- Car visor
- PICO-CARVISOR-CL, sold separatelyModels: PICO-CARVISOR-CL
Software requirements
PDF page 1 of 369847, opens in a new tab- Vive
- Vive Hub software version 01.06.13 or higherModels: PJ2-4B-XXX-XXXX
- Vive PowPak exclusion
- Standalone PowPak modules excluding RM_-ECO32-DV-BModels: PJ2-4B-XXX-XXXX
Software requirements
PDF page 1 of 369847, opens in a new tab- Energi Savr Node
- Software 8.012 or higher, through a QS sensor moduleModels: PJ2-4B-XXX-XXXX
- Quantum
- Software 3.4 or higher, through a QS sensor moduleModels: PJ2-4B-XXX-XXXX
Facts Lutron states in 369847
The values Lutron document 369847 states, as published:
- Systems it controls
- Vive: Maestro Wireless controls, standalone PowPak modules, not RM_-ECO32-DV-B
- Through a QS sensor module: Energi Savr Node, Quantum
- Systems: HomeWorks QS, HomeWorks QSX, RadioRA 2, RA2 Select, RadioRA 3, Caséta Wireless, Athena, myRoom XC, myRoom prime, myRoom plus
- Also GRAFIK Eye QS wireless
- Shades: Serena RF shades, Sivoia QS wireless
- Range and radio
- 30 ft (9 m) range through walls and 60 ft (18 m) in line of sight. Clear Connect RF at 431 MHz to 437 MHz, with thousands of system addresses to keep neighboring systems from interfering.
- Power
- 3 V DC from one CR2032 battery, included, with a 10-year battery life. The life assumes a 1-year shelf life, 10 button presses a day and 86 °F (30 °C) ambient. No wiring.
- Environment
- Operating range 32 °F to 140 °F (0 °C to 60 °C). Relative humidity up to 90%, non-condensing. Indoor use only.
- Dimensions
- Front view 2.6 in (66 mm) and 1.28 in (33 mm). Side view 0.34 in (9 mm).
- Ways to use it
- Handheld remote
- Wall-mount control with or without a faceplate (adapter kit sold separately)
- Car visor control (clip sold separately)
- Table-top control (pedestal sold separately)
- The indicator LED flashes on a button press and in programming mode
- Button layouts
- Zone control, L01 lights and S01 shades: on or open, raise, lower, off or close
- Scene control S31 shades: open, two scene buttons, close
- Scene control L31 lights: three scene buttons, off
- Scene defaults 100%, 66%, 33% and 0
- Hold a scene button 6 seconds to save a level
- 2-group: L21, S21, LS21
- 4-group toggle L41: HomeWorks, myRoom, Quantum and Athena systems only
- Standalone Pico shade compatibility
- Zone control direct: Serena wireless, Triathlon wireless, Sivoia QS wireless
- Zone control, Sivoia QS wired: via QS sensor module or hybrid repeater
- Scene and 2-group layouts standalone: Sivoia QS wireless only
- Caséta Smart Bridge (zone, scene, 2-group): Serena only
- Smart Bridge Pro: Serena, Triathlon, Sivoia QS wireless
- Neither bridge lists the 4-group toggle
- Compatibility on whole-home systems
- HomeWorks QS, myRoom plus, every layout: Triathlon wireless, Sivoia QS wireless, Sivoia QS wired
- Each needs a QS sensor module or a hybrid repeater
- HomeWorks QSX also accepts a HomeWorks wireless processor
- RadioRA 2, RA2 Select, RadioRA 3, zone, scene and 2-group: Triathlon wireless, Sivoia QS wireless, no 4-group toggle
- Athena, myRoom XC, Quantum: Sivoia QS wired only, via QS sensor module
- On Athena, an Athena wireless processor also serves
- Model number code
- PJ2-4B-XXX-XXXX: frequency/channel code, 4-button configuration code, finish code, marking code
- Frequency/channel code J: 431.0 MHz to 437.0 MHz
- Gloss finishes: white GWH, black GBL, ivory GIV, light almond GLA
- Satin Colors finishes: white TSW, black TMN, biscuit TBI
- Caséta wireless PRO packaging: L01, L31, L21 codes only
- PRO packaging adds P after the marking code
- PRO packaging finishes: gloss white WH, black BL, ivory IV, light almond LA
- Custom engraving
- Zone and scene controls only
- Codes EL1, ES1, EL2, ES2 replace L01, S01, L31, S31
- One text line per button at most, 9 pt Helvetica
- The engraving drawing marks 0.78 in (20 mm) and 0.095 in (2 mm)
- 2-group and 4-group toggle controls are not engravable
- Mounting and pedestals
- Mount on nonmetallic surfaces; PICO-MOUNT-1-XX-CPN6774 on metal
- Adhesive mount included
- Sold separately: PICO-SM-KIT screw mount, PICO-WBX-ADAPT wallbox adapter
- PICO-CARVISOR-CL car visor clip, sold separately
- Table pedestals L-PEDX-XX in gloss white or black
- Single 1.77 in (45 mm), double 3.19 in (81 mm), triple 4.59 in (117 mm)
- The drawing does not label the pedestal dimension
Questions about document 369847
The answers come from Lutron document 369847 and New Way's record of it.
What is Lutron document 369847?
Lutron's 12-page Pico 4-button specification submittal, footer 369847k, dated 03.29.2024. The compatibility tables on pages 4 to 7 say which Pico layout controls which shades on each Lutron system.
Which revision of 369847 is current?
Rev K, dated March 2024, is the revision Lutron publishes. New Way checked it against assets.lutron.com on 15 October 2026.
Which roller shades does 369847 cover?
Lutron Sivoia QS roller shades. Lutron document 369847 refers readers to document 048740.
Which Lutron shades can a standalone Pico 4-button remote control?
Lutron document 369847 lists Serena wireless, Triathlon wireless and Sivoia QS wireless shades for a standalone zone-control Pico.
- Sivoia QS wired shades: through a QS sensor module or hybrid repeater
- Standalone scene and 2-group Picos: Sivoia QS wireless shades only
How far does a Pico remote reach?
Lutron document 369847 gives a 30 ft (9 m) range through walls and 60 ft (18 m) in line of sight.
The remote uses Clear Connect RF at 431 MHz to 437 MHz.
How is a Pico 4-button model number built?
Lutron document 369847 gives the form PJ2-4B-XXX-XXXX.
- Codes: frequency/channel code (J), 4-button configuration code, finish code, button marking code
- Finish examples: GWH gloss white, TSW Satin Colors white
- Marking examples: S01 shade zone control, S31 shade scene control
Caséta wireless PRO packaging takes the L01, L31 and L21 lights codes only, with a P after the marking code.
Can a Pico be mounted on a metal surface?
Lutron document 369847 says all RF devices should be mounted on nonmetallic surfaces.
Mounting on metal requires the PICO-MOUNT-1-XX-CPN6774 kit to keep RF performance, available through the local Lutron sales office.
Can the Pico buttons be engraved with custom labels?
Lutron document 369847 offers custom engraving on zone and scene controls only.
- Codes EL1, ES1, EL2, ES2 replace L01, S01, L31, S31
- One line of text per button at most, in 9 pt Helvetica
- Engraving drawing marks 0.78 in (20 mm) and 0.095 in (2 mm)
2-group and 4-group toggle controls cannot be engraved.
Other Sivoia QS specification submittals
Specification submittals for the same Sivoia QS system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 0853144-Group RF Remote Control Specification Submittal | C | May 2016 | |
| 085313Horizontal Sheer Blinds Specification Submittal | Roller 64, Roller 100 | D | May 2016 |
| 369612Pico Wireless Control Specification Submittal | Roller 20 to 300 | Q | Jun 2025 |
| 085274Hard Wired Power Supply Specification Submittal | D | Aug 2014 |
Documents used with 369847
Lutron document 369612 is the Sivoia QS Pico submittal; 085314 and 045411 are 4-Group RF remote submittal and setup guide. Lutron document 369847 refers Vive compatibility to Application Note 740 (048740); 085313 is the horizontal sheer blind submittal.
| Document | Type | Revision | Date |
|---|---|---|---|
| 0454114-Group RF Remote Control Installation Guide | Installation Guide | D | Jan 2015 |
| CAD Drawing: Shade Equipment CAD Block | CAD Drawing | ||
| 085612Roller 100 CAD Drawing: 4.75″ x 5″ (121 x 127mm) Pocket, Detail Drawing | CAD Drawing | A | |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 048863Roller Shades Application Note: Fabric Aesthetic Characteristics | Application Note | A | May 2026 |
| 045520Basic Wiring and Setup Installation Guide | Installation Guide | B | Nov 2016 |
| 045964Cordless Manual Roller Shade Installation Guide | Installation Guide | B | Nov 2025 |
| 045000710 Output Power Panel Power Supply (12 V) Installation Guide | Installation Guide | A | Jul 2025 |
| 04562030-Output Configurable Power Panel Enclosure, 35V Output Installation Guide | Installation Guide | B | Jan 2018 |
Revisions of 369847
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| K | Mar 2024 | Current. The file on assets.lutron.com. Checked 15 Oct 2026. |
Not covered in 369847, and what to read next
Lutron document 369847 does not describe pairing a Pico with a shade or system, and needs no wiring.
- Pairing: the installation guide of the shade being controlled
- Vive systems: 048740, Lutron Application Note 740
Publisher and citation for document 369847
Lutron Electronics Co., Inc. publishes document 369847, Rev K, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 15 October 2026.
Lutron, Sivoia QS, Triathlon and Serena are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 369847 filled in.
