You searched and this document matched it.
See all results085383 · CAD Drawing · Rev B · English · PDF, DWG, DXF
Lutron Sivoia QS Roller Shades CAD Drawing: Roller 100/150/300 Wall Mount Shade, Section View (085383)
Lutron's section view of the Roller 100/150/300 wall mount shade.
Lutron 085383 Rev B, Sivoia QS Roller Shades CAD Drawing: Roller 100/150/300 Wall Mount Shade, Section View. https://assets.lutron.com/a/documents/085383.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-shades-cad-drawing-085383/
About document 085383
Lutron drawing 085383, revision B, is the CAD section view of that wall mount: tube and roll-up sizes, two tube center dimensions, projection adjustment, the fabric position with the shade closed and the clearance note.
What drawing 085383 covers
Lutron document 085383 has these six sections, all on its one page.
- Section view
- Legend (top view)
- Note on clearances: factory clearances and installer-adjusted clearances
- Tube diameter, tube center and roll-up callouts
- Projection adjust, fabric position and hembar callouts
- Title block with scale, view and revision
Specifications in 085383
Lutron document 085383 prints twelve values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
View 1, section view
PDF page 1 of 085383, opens in a new tab- Tube diameter
- 2.56 in (65 mm)
- Optional WIDR tube diameter
- 3.03 in (77 mm)
- Maximum roll-up diameter
- 4.00 in (102 mm)
- Tube center at maximum projection, horizontal dimension
- 3.00 in (77 mm)
- Tube center, vertical dimension
- 1.56 in (39 mm)
- Projection adjust
- minus 0.5 in to plus 0 in (inches only)
- Fabric position, shade closed
- 1.69 in (43 mm)
- Unlabeled dimension
- 1.00 in (26 mm)
Title block
PDF page 1 of 085383, opens in a new tab- Scale
- 1/2
- View
- 1
- Drawing number
- 085383
- Revision
- B
Facts Lutron states in 085383
The values Lutron document 085383 states, as published:
- Shade drawn
- Roller 100/150/300 wall mount shade, section view
- Tube diameter
- 2.56 in (65 mm)
- Optional WIDR tube diameter
- 3.03 in (77 mm)
- Maximum roll-up diameter
- 4.00 in (102 mm)
- Tube center at maximum projection
- 3.00 in (77 mm) as printed, drawn horizontally
- Second tube center
- 1.56 in (39 mm), drawn vertically, with no datum face named for either tube center
- Projection adjustment
- minus 0.5 in to plus 0 in, printed in inches only
- Fabric position, shade closed
- 1.69 in (43 mm), the dimension drawn to the fabric line that the callout marks
- Parts labeled
- wall fasteners, sub-bracket, hembar (varies)
- Clearance note
- A factory-supplied shade has the clearances it needs
- An installer who uses the adjustment features keeps them
- Not every adjustment is available at the maximum roll diameter
- Mounting note
- none on the sheet, the section showing the wall mount only
- Unlabeled dimension
- 1.00 in (26 mm)
- Scale, view and revision
- scale 1/2, view 1, revision B
Questions about document 085383
The answers come from Lutron document 085383 and New Way's record of it.
What is Lutron drawing 085383?
Lutron's one-sheet section view of the wall mount, view 1 at scale 1/2, with a top-view legend. Lutron publishes the drawing as DWG and DXF files.
Which revision of 085383 is current?
Rev B is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085383 cover?
Lutron Sivoia QS roller shades.
How far does the tube sit off the wall?
Lutron drawing 085383 prints a tube center of 3.00 in (77 mm) at maximum projection and a second tube center of 1.56 in (39 mm). The sheet does not say which face either is measured from.
How much roll-up room does the wall mount need?
Lutron drawing 085383 marks a maximum roll-up diameter of 4.00 in (102 mm). Lutron draws the tube at 2.56 in (65 mm), with an optional WIDR tube of 3.03 in (77 mm).
Where does the fabric hang when the shade is closed?
Lutron drawing 085383 dimensions the fabric position with the shade closed at 1.69 in (43 mm). The callout's leader marks the fabric line and the dimension runs to it.
Is there projection adjustment on the wall bracket?
Lutron drawing 085383 marks a projection adjustment of minus 0.5 in to plus 0 in.
Lutron's note makes an installer who uses it responsible for the operating clearances. Lutron adds that not all adjustments are available at the maximum roll diameter.
Other Sivoia QS CAD drawings
CAD drawings for the same Sivoia QS system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085831Roller Shades CAD Drawing: Roller 100/150/300 Wall Mount in 5″ Pocket, Wall Mount, Section View | Roller 100, Roller 300 | A | |
| 085386Roller Shades CAD Drawing: Roller 100/150/300 Jamb Mount Shade, Section View | Roller 100, Roller 300 | A | |
| 085506Roller Shades CAD Drawing: Roller 100/150/300 Wall/Jamb Left Shade Bracket, Detail Drawing | Roller 100, Roller 300 | A | |
| 085389Roller 100 CAD Drawing: Ceiling Mount, Section View | Roller 100 | A |
Documents used with 085383
Lutron drawings 085506 and 085507 are the wall/jamb left and right shade bracket detail drawings. Lutron drawings 085389 (ceiling mount), 085386 (jamb mount) and 085831 (5 in pocket) are among the other single-shade section views.
| Document | Type | Revision | Date |
|---|---|---|---|
| 086106Roller Shades Specification Submittal: Roller 100 | Specification Submittal | B | May 2017 |
| 045627ROLLER 100/150/300 – Pocket Mount Chassis Installation Guide | Installation Guide | A | Feb 2019 |
| 045211Roller Shades Installation Guide: Angled Coupler Chassis Addendum | Installation Guide | A | |
| Roller Shades Revit Family: Roller 100/150/200 (Wall Mount) | Revit Family | ||
| Roller Shades Revit Family: Dual Roller 100/150/200 (Ceiling Mount) | Revit Family | ||
| Roller Shades Revit Family: Dual Roller 100/150/200 (Wall Mount) | Revit Family | ||
| Roller Shades Revit Family: Roller 100/150/200 (Pocket Mount) | Revit Family | ||
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 085274Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
Revisions of 085383
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| B | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085383, and what to read next
Lutron drawing 085383 prints no shade width limit, fastener size, bracket spacing or wiring.
Publisher and citation for document 085383
Lutron Electronics Co., Inc. publishes document 085383, Rev B, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085383 filled in.
