You searched and this document matched it.
See all results085384 · CAD Drawing · Rev C · English · PDF, DWG, DXF
Lutron Sivoia QS Roller 100 CAD Drawing: Wall Mount Shade, Elevation View (085384)
Lutron's elevation drawing of the wall-mounted Sivoia QS Roller 100/150/300 shade.
Lutron 085384 Rev C, Sivoia QS Roller 100 CAD Drawing: Wall Mount Shade, Elevation View. https://assets.lutron.com/a/documents/085384.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-100-cad-drawing-085384/
About document 085384
Lutron drawing 085384, revision C, is the elevation, view 2 at 1/4 scale: the minimum shade width and height, the maximum roll, the minimum light gap with its quote reference, and the clearance note.
What drawing 085384 covers
Lutron document 085384 has these six sections, all on its one page.
- Elevation view
- Shade size, light gap and maximum roll callouts
- Quote reference for the actual light gap
- Legend (top view) with markers 1 and 2
- Clearance note on factory and installer-adjusted clearances
- Title block with scale, view and revision
Specifications in 085384
Lutron document 085384 prints 13 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Minimum width of shade
- 24 in (610 mm)
- Minimum shade height
- 12 in (305 mm)
- Minimum light gap
- 0.75 in (21 mm), as printed
- Actual light gap
- Refer to the quote
- Max roll
- 4.00 in (102 mm)
- Unlabeled dimension
- 3.88 in (99 mm)
- Shade installed as supplied by the factory
- Has the clearances it needs to operate
- Clearances once adjustment features are used
- The installer's responsibility
- Adjustments at maximum roll diameter
- Not all available
title block
PDF page 1 of 085384, opens in a new tab- Drawing number
- 085384
- Scale
- 1/4
- View
- 2
- Revision
- C
Facts Lutron states in 085384
The values Lutron document 085384 states, as published:
- Minimum width of shade
- 24 in (610 mm)
- Minimum shade height
- 12 in (305 mm)
- Maximum roll
- 4.00 in (102 mm)
- Minimum light gap
- 0.75 in (21 mm), as printed
- Actual light gap
- On the quote, per Lutron's note
- Other callout
- 3.88 in (99 mm), unlabeled
- Clearances
- A shade installed as the factory supplies it has the clearances it needs for proper operation
- Clearances after adjustment
- The installer keeps proper clearances once the adjustment features are used
- Adjustments at maximum roll
- Not every adjustment is available at the maximum roll diameter
- Scale, view and revision
- 1/4 scale, view 2, revision C
- File formats
- PDF, DWG and DXF
- Not on the drawing
- No bracket is named or dimensioned, and no fastener or section through the head is printed on this elevation
Questions about document 085384
The answers come from Lutron document 085384 and New Way's record of it.
What is the minimum shade size for a wall mount?
Lutron drawing 085384 prints a minimum shade width of 24 in (610 mm) and a minimum shade height of 12 in (305 mm).
Which revision of 085384 is current?
Rev C is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085384 cover?
Lutron Sivoia QS roller shades in the Roller 100 drive class.
Does drawing 085384 name a bracket or fixings?
No. Lutron's elevation 085384 draws the end brackets in outline only, with no name or dimension, and prints no fastener.
Lutron drawings 085506 and 085507 are the wall and jamb left and right shade bracket details for the family.
What is the 3.88 in (99 mm) dimension?
Lutron prints 3.88 in (99 mm) on drawing 085384 without a label, so the page gives it no name. Read where the value is measured on the DWG.
Does a factory-supplied shade need extra clearance on the wall?
Lutron's clearance note on drawing 085384 says a shade installed as the factory supplies it has the clearances it needs.
Once the adjustment features are used, Lutron makes the installer responsible for proper clearances. Lutron adds that not every adjustment is available at the maximum roll diameter.
How big is the roll on a wall-mounted shade?
Lutron drawing 085384 prints a maximum roll of 4.00 in (102 mm) on the elevation.
What light gap should I allow?
Lutron drawing 085384 prints a minimum light gap of 0.75 in (21 mm) and adds that the actual light gap is given on the quote.
Other Sivoia QS Roller 100 CAD drawings
CAD drawings for the same Sivoia QS Roller 100 drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085399Roller 100 CAD Drawing: 4″ (103mm) Square Fascia, Elevation View | Roller 100 | A | |
| 085396Roller 100 CAD Drawing: 4.75″ x 5″ (121 x 127mm) Pocket, Elevation View | Roller 100 | B | |
| 085578Roller 100 CAD Drawing: Butt and Pass Corner Solution | Roller 100 | A | |
| 085387Roller Shades CAD Drawing: Roller 100/150/300 Jamb Mount Shade, Elevation View | Roller 100, Roller 300 | A |
Documents used with 085384
Lutron drawing 085383 is the matching section; 085506, 085507 and 085508 are the wall and jamb bracket and sub-bracket details. Lutron's other elevations are 085396 (pocket), 085399 (fascia) and 085387 (jamb); 085578 is the butt and pass corner drawing.
| Document | Type | Revision | Date |
|---|---|---|---|
| Roller 100 Installation Guide: Angled Coupler WIDR Tube, Light Gap Reference | Installation Guide | A | |
| Roller 100 Installation Guide: Angled Coupler, Light Gap Reference 2.5″ Tube | Installation Guide | A | |
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| 369847Pico Wireless Control, 4-Button Specification Submittal | Specification Submittal | K | Mar 2024 |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 085274Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 048863Roller Shades Application Note: Fabric Aesthetic Characteristics | Application Note | A | May 2026 |
| Roller Shades Revit Family: Roller 100/150/200 (Wall Mount) | Revit Family | ||
| Revit Family: QS J-Box 35V Power Supply | Revit Family |
Revisions of 085384
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| C | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085384, and what to read next
Lutron drawing 085384 gives the wall mount elevation only: no bracket dimensions, head section or fixings.
Publisher and citation for document 085384
Lutron Electronics Co., Inc. publishes document 085384, Rev C, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085384 filled in.
