You searched and this document matched it.
See all results085389 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Roller 100 CAD Drawing: Ceiling Mount, Section View (085389)
Lutron's section view of the Sivoia QS Roller 100/150/300 ceiling mount shade, for sizing a ceiling recess or head detail.
Lutron 085389 Rev A, Sivoia QS Roller 100 CAD Drawing: Ceiling Mount, Section View. https://assets.lutron.com/a/documents/0043-r100-cmt-s.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/roller-100-ceiling-mount-elevation-view/
About document 085389
Lutron drawing 085389, revision A, is the CAD section view of the ceiling mount shade, dimensioning the bracket depth and height, tube diameter, tube centers, maximum roll-up and projection adjustment range.
What drawing 085389 covers
Lutron document 085389 has these six sections, all on its one page.
- Section view of the ceiling-mounted shade (view 1)
- Legend (top view)
- Bracket, tube and roll-up dimensions
- Projection adjustment range
- Clearance note on the adjustment features
- Title block with number, scale, view and revision
Specifications in 085389
Lutron document 085389 prints 13 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
View 1, section view
PDF page 1 of 085389, opens in a new tab- Bracket depth
- 3.13 in (79 mm)
- Bracket height
- 4.38 in (111 mm)
- Tube diameter
- 2.56 in (65 mm)
- Optional WIDR tube diameter
- 3.03 in (77 mm)
- Maximum roll-up diameter
- 4.00 in (102 mm)
- Tube center
- 2.56 in (65 mm)
- Tube center
- 2.81 in (71 mm)
- Projection adjust
- minus 0.25 in to plus 0.25 in (inches only)
- Unlabeled dimension
- 0.56 in (14 mm)
- Unlabeled dimension
- 1.00 in (25 mm)
Title block
PDF page 1 of 085389, opens in a new tab- Scale
- 1/2
- View
- 1
- Revision
- A
Facts Lutron states in 085389
The values Lutron document 085389 states, as published:
- Shade covered
- Roller 100/150/300 ceiling mount shade, one section for the three drive sizes
- View, scale and revision
- section view, view 1, scale 1/2, revision A
- Bracket depth
- 3.13 in (79 mm)
- Bracket height
- 4.38 in (111 mm)
- Tube diameter
- 2.56 in (65 mm)
- Optional WIDR tube diameter
- 3.03 in (77 mm)
- Maximum roll-up diameter
- 4.00 in (102 mm)
- Tube center dimensions
- 2.56 in (65 mm) and 2.81 in (71 mm), two tube center figures on the section
- Projection adjustment
- minus 0.25 in to plus 0.25 in, printed in inches only
- Parts labeled
- ceiling fasteners, sub-bracket, hembar (varies), glazing (typical)
- Clearance note
- A factory-supplied shade has the clearances it needs
- An installer who uses the adjustment features keeps them
- Not every adjustment is available at the maximum roll diameter
- Unlabeled dimensions
- 0.56 in (14 mm) and 1.00 in (25 mm)
Questions about document 085389
The answers come from Lutron document 085389 and New Way's record of it.
What is Lutron document 085389?
Lutron's one-page section view, drawn as view 1 at 1/2 scale, revision A. One section serves the Roller 100, Roller 150 and Roller 300 drives.
Which revision of 085389 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085389 cover?
Lutron Sivoia QS roller shades in the Roller 100 drive class.
What bracket depth and height does drawing 085389 give?
Lutron drawing 085389 dimensions the ceiling mount bracket at 3.13 in (79 mm) deep and 4.38 in (111 mm) high.
What is the maximum roll-up diameter on the ceiling mount section?
Lutron drawing 085389 shows a maximum roll-up of 4.00 in (102 mm) diameter.
- Tube diameter: 2.56 in (65 mm)
- Optional WIDR tube: 3.03 in (77 mm)
Can the shade projection be adjusted after mounting?
Lutron drawing 085389 shows a projection adjustment of minus 0.25 in to plus 0.25 in, printed in inches only.
Lutron's note says a factory-supplied shade has the clearances it needs. An installer who uses the adjustment features keeps them, and not every adjustment is available at the maximum roll diameter.
What are the two tube center dimensions on drawing 085389?
Lutron drawing 085389 prints two figures labeled tube center on the section, 2.56 in (65 mm) and 2.81 in (71 mm). Lutron prints no datum in words for either figure, so read each dimension line on the PDF before using it.
Which parts does Lutron label on the ceiling mount section?
Lutron drawing 085389 labels the ceiling fasteners, the sub-bracket, the projection adjustment, the hembar and the glazing.
The hembar is marked as varying and the glazing as typical. A legend drawn as a top view carries two numbered items.
Other Sivoia QS Roller 100 CAD drawings
CAD drawings for the same Sivoia QS Roller 100 drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085404Roller Shades CAD Drawing: Roller 100/150/300 Dual-Mount Shade in 7″ x 11″ Pocket, Section View | Roller 100, Roller 300 | A | |
| 085387Roller Shades CAD Drawing: Roller 100/150/300 Jamb Mount Shade, Elevation View | Roller 100, Roller 300 | A | |
| 085395Roller 100 CAD Drawing: 4.75″ x 5″ (121 x 127mm) Pocket, Section View | Roller 100 | A | |
| 085609Roller 100 CAD Drawing: 4″ (103mm) Square Fascia End Cap, Detail Drawing | Roller 100 | A |
Documents used with 085389
Lutron drawing 085390 is the matching elevation view, paired with 085389 in a ceiling mount head detail or submittal. Lutron drawings 085387 (jamb mount elevation view) and 085404 (dual mount section view) cover the same Roller 100/150/300 series.
| Document | Type | Revision | Date |
|---|---|---|---|
| Roller 100 Installation Guide: Angled Coupler WIDR Tube, Light Gap Reference | Installation Guide | A | |
| Roller 100 Installation Guide: Angled Coupler, Light Gap Reference 2.5″ Tube | Installation Guide | A | |
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| 369847Pico Wireless Control, 4-Button Specification Submittal | Specification Submittal | K | Mar 2024 |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 085274Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 048863Roller Shades Application Note: Fabric Aesthetic Characteristics | Application Note | A | May 2026 |
| Revit Family: QS J-Box 35V Power Supply | Revit Family | ||
| Revit Family: QS Smart Power Panel, 30 Output | Revit Family |
Revisions of 085389
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085389, and what to read next
Lutron drawing 085389 gives the section only: no minimum shade width or height, light gap, fixing sizes or wiring.
- Elevation: 085390, the ceiling mount elevation view of the same shade
- Between jambs: 085387, the jamb mount elevation view
Publisher and citation for document 085389
Lutron Electronics Co., Inc. publishes document 085389, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085389 filled in.
