You searched and this document matched it.
See all results085417 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Roller Shades CAD Drawing: Roller 100/150/300 High Angled Coupled, Plan View (085417)
Lutron's plan view of Sivoia QS Roller 100/150/300 shades on a high angled coupling.
Lutron 085417 Rev A, Sivoia QS Roller Shades CAD Drawing: Roller 100/150/300 High Angled Coupled, Plan View. https://assets.lutron.com/a/documents/085417.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-shades-cad-drawing-085417/
About document 085417
Lutron drawing 085417, revision A, is the one-sheet CAD plan of that coupling at scale 1/8: the maximum angle, the minimum coupled and drive panel widths, the light gap labels and the installer note.
What drawing 085417 covers
Lutron document 085417 has these nine sections, all on its one page.
- Sheet header: Roller 100/150/300, R100 high angled coupled
- Plan view of the coupled shades
- Maximum coupling angle
- Minimum coupled panel fabric width
- Minimum drive panel width
- Regular roll and reverse roll light gap labels
- Minimum gap and an unlabeled dimension
- Installer note on clearances and adjustment
- Title block with scale, view and revision
Specifications in 085417
Lutron document 085417 prints eleven values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Maximum angle
- 45° (printed MAX 45°)
- Minimum coupled panel fabric width
- 22.125 in (562 mm)
- Minimum drive panel width
- 25.5 in (648 mm) to 26.5 in (673 mm)
- Regular roll light gap
- Labeled; no figure in the label
- Reverse roll light gap
- Labeled; no figure in the label
- Minimum gap
- 0.75 in (19 mm)
- Dimension without a label
- 0.63 in (16 mm)
Title block
PDF page 1 of 085417, opens in a new tab- Drawing number
- 085417
- Scale
- 1/8
- View
- Plan
- Revision
- A
Facts Lutron states in 085417
The values Lutron document 085417 states, as published:
- Drawing number and revision
- 085417, revision A, in the title block, no issue date printed
- View and scale
- Plan view, scale 1/8, with the title block view box reading PLAN
- Shades drawn
- Roller 100/150/300 shades on a high angled coupling, with R100 in the sheet header
- Maximum angle
- 45°, printed as MAX 45°
- Minimum coupled panel fabric width
- 22.125 in (562 mm)
- Minimum drive panel width
- 25.5 in (648 mm) to 26.5 in (673 mm), printed as a range
- Light gap labels
- Regular roll and reverse roll light gaps, both labeled, neither label carrying a figure
- Minimum gap
- 0.75 in (19 mm)
- Dimension without a label
- 0.63 in (16 mm)
- Installer note
- A factory-supplied shade has the clearances it needs
- The installer keeps the clearances once adjustment features are used
- Some adjustments are unavailable at the largest roll diameter
- File formats
- PDF (one sheet, about 213 KB), DWG and DXF
Questions about document 085417
The answers come from Lutron document 085417 and New Way's record of it.
What is Lutron drawing 085417?
Lutron's one-sheet plan view at scale 1/8, with no issue date printed. Lutron publishes the sheet as a PDF of about 213 KB and as DWG and DXF files.
Which revision of 085417 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085417 cover?
Lutron Sivoia QS roller shades.
What is the largest angle the high angled coupling allows?
Lutron drawing 085417 marks a maximum of 45° for the Roller 100/150/300 high angled coupling.
How narrow can the panels be on a high angled coupled shade?
Lutron drawing 085417 gives a minimum coupled panel fabric width of 22.125 in (562 mm). Lutron gives the minimum drive panel width as a range, 25.5 in (648 mm) to 26.5 in (673 mm).
What light gaps does drawing 085417 print?
Lutron drawing 085417 labels a regular roll and a reverse roll light gap, with no figure in either label. Lutron prints a minimum gap of 0.75 in (19 mm), and 0.63 in (16 mm) without a label.
Does the high angled coupled plan say the clearances are built in?
Lutron drawing 085417 states that a shade installed as the factory supplies it has the clearances it needs.
Lutron makes the installer responsible for those clearances once adjustment features are used. Lutron adds that some adjustments are not available at the largest roll diameter.
Other Sivoia QS CAD drawings
CAD drawings for the same Sivoia QS system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085414Roller Shades CAD Drawing: Roller 100/150/300 Low Angled Coupled, Plan View | Roller 100, Roller 300 | A | |
| 085407Roller Shades CAD Drawing: Roller 100/150/300 Coupled Shade, Elevation View | Roller 100, Roller 300 | A | |
| 085402Roller Shades CAD Drawing: Roller 100 in Armstrong Compatible 5″ Pocket Elevation View | Roller 100, Roller 300 | A | |
| 085401Roller Shades CAD Drawing: Roller 100 in Armstrong Compatible 5″ Pocket Section View | Roller 100, Roller 300 | A |
Documents used with 085417
Lutron drawings 085414 and 085407 are the low angled plan and the elevation of the same coupled shades. Lutron document 045315 is the angled coupled shade measuring template.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045315Roller Shades Installation Guide: Angled Coupled Shade, Measuring Template | Installation Guide | B | |
| 086106Roller Shades Specification Submittal: Roller 100 | Specification Submittal | B | May 2017 |
| 045627ROLLER 100/150/300 – Pocket Mount Chassis Installation Guide | Installation Guide | A | Feb 2019 |
| 045211Roller Shades Installation Guide: Angled Coupler Chassis Addendum | Installation Guide | A | |
| Roller Shades Revit Family: Dual Roller 100/150/200 (Ceiling Mount) | Revit Family | ||
| Roller Shades Revit Family: Dual Roller 100/150/200 (Wall Mount) | Revit Family | ||
| Roller Shades Revit Family: Roller 100/150/200 (Pocket Mount) | Revit Family | ||
| Roller Shades Revit Family: Roller 100/150/200 (Wall Mount) | Revit Family | ||
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family |
Revisions of 085417
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085417, and what to read next
Lutron drawing 085417 gives no coupler or bracket dimensions, no pocket or fascia section and no mounting details.
Publisher and citation for document 085417
Lutron Electronics Co., Inc. publishes document 085417, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085417 filled in.
