You searched and this document matched it.
See all results085402 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Roller Shades CAD Drawing: Roller 100 in Armstrong Compatible 5″ Pocket Elevation View (085402)
Lutron's elevation of a Sivoia QS Roller 100/150/300 shade in an Armstrong-compatible 5 in pocket.
Lutron 085402 Rev A, Sivoia QS Roller Shades CAD Drawing: Roller 100 in Armstrong Compatible 5 in. Pocket Elevation View. https://assets.lutron.com/a/documents/085402.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-shades-cad-drawing-085402/
About document 085402
Lutron drawing 085402, Rev A, is view 2, the 1/4 scale elevation of that pocket shade: minimum shade width and height, the Armstrong Axiom pocket note and the clearance note.
What drawing 085402 covers
Lutron document 085402 has these six sections, all on its one page.
- Elevation view of the shade in the pocket
- Minimum width of shade and minimum shade height
- Armstrong Axiom pocket note
- Clearance note on site adjustment
- Legend with view markers 1 and 2
- Title block with scale, view and revision
Specifications in 085402
Lutron document 085402 prints ten values in the groups the document uses, each with the document's unit. A row names the catalog codes it applies to. The page link beside each group opens the PDF where the group starts.
View 2, elevation view, scale 1/4
PDF page 1 of 085402, opens in a new tab- Minimum width of shade
- 24 in (610 mm) to 26.5 in (673 mm)
- Minimum shade height
- 12 in (305 mm)
- Dimension without a label
- 0.75 in (18 mm)
- Dimension without a label
- 3.13 in (79 mm)
- Pocket shown
- Armstrong Axiom pocket, AXP355L shown, provided by othersModels: AXP355L
- Pocket dimensions and mounting details
- For reference only
- Adjustments at maximum roll diameter
- Not all available
Title block
PDF page 1 of 085402, opens in a new tab- Scale
- 1/4
- View
- 2
- Revision
- A
Facts Lutron states in 085402
The values Lutron document 085402 states, as published:
- Subject
- Roller 100/150/300 Armstrong-compatible shade with 5 in pocket, elevation view
- Minimum width of shade
- 24 in (610 mm) to 26.5 in (673 mm), printed as a range
- Minimum shade height
- 12 in (305 mm)
- Dimensions without a label
- 0.75 in (18 mm) and 3.13 in (79 mm)
- Armstrong Axiom pocket, AXP355L shown, supplied by others
- Pocket dimensions and mounting
- Drawn for reference only, with armstrongceilings.com named for the pocket's specification and installation
- Clearances
- Factory-supplied shades have the clearances they need, and the installer keeps them once adjustment features are used
- Adjustments at maximum roll diameter
- Lutron notes that not every adjustment is available at the maximum roll diameter
- Scale and view
- 1/4 scale, view 2
- Revision and date
- Revision A, no date printed
- File formats
- PDF, DWG and DXF
Questions about document 085402
The answers come from Lutron document 085402 and New Way's record of it.
What is Lutron drawing 085402?
Lutron's one-sheet CAD elevation at 1/4 scale, published as PDF, DWG and DXF with no date printed.
Which revision of 085402 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085402 cover?
Lutron Sivoia QS roller shades.
What is the minimum shade width in the Armstrong pocket?
Lutron drawing 085402 prints the minimum width of shade as a range, 24 in (610 mm) to 26.5 in (673 mm). Lutron's drawing does not say what sets the two ends of the range.
Who supplies the Armstrong pocket shown on drawing 085402?
Lutron drawing 085402 states that the Axiom pocket (AXP355L shown) is provided by others. Lutron draws the pocket for reference only and points to armstrongceilings.com for its specification and installation.
Does the shade keep its clearances after site adjustment?
Lutron drawing 085402 says a shade installed as the factory supplies it has the clearances it needs.
Once adjustment features are used, the installer must keep proper clearances. Lutron adds that not every adjustment is available at the maximum roll diameter.
What is the shortest shade the Armstrong pocket elevation allows?
Lutron drawing 085402 prints a minimum shade height of 12 in (305 mm) for the Roller 100/150/300 shade in the Armstrong-compatible 5 in pocket.
Does drawing 085402 give separate values for Roller 100, 150 and 300?
Lutron titles drawing 085402 for Roller 100/150/300 and prints one set of values. Lutron does not split the minimum width or height by drive size on the sheet.
Lutron documents 086106, 085267 and 085286 are the Roller 100, Roller 150 and Roller 300 specification submittals.
Other Sivoia QS CAD drawings
CAD drawings for the same Sivoia QS system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085401Roller Shades CAD Drawing: Roller 100 in Armstrong Compatible 5″ Pocket Section View | Roller 100, Roller 300 | A | |
| 085405Roller Shades CAD Drawing: Roller 100/150/300 Dual-Mount Shade in 7″ x 11″ Pocket, Elevation View | Roller 100, Roller 300 | A | |
| 085407Roller Shades CAD Drawing: Roller 100/150/300 Coupled Shade, Elevation View | Roller 100, Roller 300 | A | |
| 085410Roller Shades CAD Drawing: Roller 100/150/300 Dual Narrow Coupled, Elevation View | Roller 100, Roller 300 | A |
Documents used with 085402
Lutron drawing 085401 is the matching section view of the same shade and pocket. Lutron's other Roller 100/150/300 elevation views are 085390, 085387, 085407, 085410 and 085405.
| Document | Type | Revision | Date |
|---|---|---|---|
| 086106Roller Shades Specification Submittal: Roller 100 | Specification Submittal | B | May 2017 |
| 045627ROLLER 100/150/300 – Pocket Mount Chassis Installation Guide | Installation Guide | A | Feb 2019 |
| 045211Roller Shades Installation Guide: Angled Coupler Chassis Addendum | Installation Guide | A | |
| Roller Shades Revit Family: Dual Roller 100/150/200 (Ceiling Mount) | Revit Family | ||
| Roller Shades Revit Family: Dual Roller 100/150/200 (Wall Mount) | Revit Family | ||
| Roller Shades Revit Family: Roller 100/150/200 (Pocket Mount) | Revit Family | ||
| Roller Shades Revit Family: Roller 100/150/200 (Wall Mount) | Revit Family | ||
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 085274Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
Revisions of 085402
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085402, and what to read next
Lutron drawing 085402 shows no section through the pocket, names no fastener and gives no installation step.
- Section through the pocket: 085401, the matching section view
- Pocket data: armstrongceilings.com, named in Lutron's note
Publisher and citation for document 085402
Lutron Electronics Co., Inc. publishes document 085402, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085402 filled in.
