You searched and this document matched it.
See all results085401 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Roller Shades CAD Drawing: Roller 100 in Armstrong Compatible 5″ Pocket Section View (085401)
Lutron's section through a Sivoia QS Roller 100/150/300 shade in an Armstrong-compatible 5 in pocket.
Lutron 085401 Rev A, Sivoia QS Roller Shades CAD Drawing: Roller 100 in Armstrong Compatible 5 in. Pocket Section View. https://assets.lutron.com/a/documents/085401.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-shades-cad-drawing-085401/
About document 085401
Lutron drawing 085401, Rev A, is view 1, the 1/2 scale section of that pocket shade: pocket height and depth, tube and roll-up diameters, tube centers, fastener callouts and the pocket notes.
What drawing 085401 covers
Lutron document 085401 has these nine sections, all on its one page.
- Section view of the shade in the pocket
- Pocket height, pocket depth and optional pocket flap
- Tube diameter, optional WIDR tube and maximum roll-up
- Tube center dimensions
- Wall fasteners, hembar and glazing callouts
- Armstrong Axiom pocket note
- Clearance note on site adjustment
- Legend with view markers 1 and 2
- Title block with scale, view and revision
Specifications in 085401
Lutron document 085401 prints 19 values in the groups the document uses, each with the document's unit. A row names the catalog codes it applies to. The page link beside each group opens the PDF where the group starts.
View 1, section view, scale 1/2
PDF page 1 of 085401, opens in a new tab- Pocket height
- 5.69 in (145 mm)
- Pocket depth
- 5.44 in (138 mm)
- Pocket flap (optional)
- 3.00 in (77 mm)
- Tube diameter
- 2.56 in (65 mm) diameter
- Optional WIDR tube diameter
- 3.03 in (77 mm) diameter
- Maximum roll-up
- 3.85 in (98 mm) diameter
- Tube center
- 2.75 in (69 mm)
- Tube center
- 3.19 in (81 mm)
- Dimension without a label
- 1.31 in (33 mm)
- Dimension without a label
- 0.81 in (20 mm)
- Hembar
- Varies
- Glazing
- Typical
- Fixings labeled
- Wall fasteners
- Pocket shown
- Armstrong Axiom pocket, AXP355L shown, provided by othersModels: AXP355L
- Pocket dimensions and mounting details
- For reference only
- Adjustments at maximum roll diameter
- Not all available
Title block
PDF page 1 of 085401, opens in a new tab- Scale
- 1/2
- View
- 1
- Revision
- A
Facts Lutron states in 085401
The values Lutron document 085401 states, as published:
- Pocket height
- 5.69 in (145 mm)
- Pocket depth
- 5.44 in (138 mm)
- Pocket flap
- Optional, 3.00 in (77 mm), conversion as printed
- Tube diameter
- 2.56 in (65 mm)
- Optional WIDR tube
- 3.03 in (77 mm) diameter
- Maximum roll-up
- 3.85 in (98 mm) diameter
- Tube center
- 2.75 in (69 mm) and 3.19 in (81 mm), reference face not stated
- Dimensions without a label
- 1.31 in (33 mm) and 0.81 in (20 mm)
- Other callouts
- Wall fasteners labeled
- Hembar marked as varying
- Glazing shown as typical
- Pocket supplier
- Armstrong Axiom pocket, AXP355L shown, supplied by others and drawn for reference only, with armstrongceilings.com named for the rest
- Clearances
- Factory-supplied shades have the clearances they need, and the installer keeps them once adjustment features are used
- Adjustments at maximum roll diameter
- Not every adjustment is available at the maximum roll diameter
- Scale, view and revision
- 1/2 scale, view 1, revision A, no date printed
- File formats
- PDF, DWG and DXF
Questions about document 085401
The answers come from Lutron document 085401 and New Way's record of it.
What is Lutron drawing 085401?
Lutron's one-sheet CAD section at 1/2 scale, published as PDF, DWG and DXF with no date printed.
Which revision of 085401 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085401 cover?
Lutron Sivoia QS roller shades.
How big is the Armstrong pocket in section on drawing 085401?
Lutron drawing 085401 prints a pocket height of 5.69 in (145 mm).
- Pocket depth: 5.44 in (138 mm)
- Optional pocket flap: 3.00 in (77 mm), conversion as printed
What tube and roll-up diameters does the section show?
Lutron drawing 085401 shows a 2.56 in (65 mm) tube diameter.
- Optional WIDR tube: 3.03 in (77 mm)
- Maximum roll-up: 3.85 in (98 mm)
Where does the tube sit in the pocket?
Lutron drawing 085401 prints two tube center dimensions, 2.75 in (69 mm) and 3.19 in (81 mm). Lutron's sheet does not say which face each one is measured from, so check them on the DWG.
Who supplies the pocket on drawing 085401?
Lutron drawing 085401 states that the Axiom pocket (AXP355L shown) is provided by others. Lutron draws its dimensions and mounting for reference only and names armstrongceilings.com for its specification and installation.
Lutron labels wall fasteners on the section but gives no fastener size or type.
Is the pocket flap required?
Lutron drawing 085401 marks the pocket flap as optional and dimensions it at 3.00 in (77 mm). Lutron's drawing does not say when the flap is used.
Other Sivoia QS CAD drawings
CAD drawings for the same Sivoia QS system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085402Roller Shades CAD Drawing: Roller 100 in Armstrong Compatible 5″ Pocket Elevation View | Roller 100, Roller 300 | A | |
| 085831Roller Shades CAD Drawing: Roller 100/150/300 Wall Mount in 5″ Pocket, Wall Mount, Section View | Roller 100, Roller 300 | A | |
| 085833Roller Shades CAD Drawing: Roller 100/150/300 Dual Wall Mount in 7″X11″ Pocket, Section View | Roller 100, Roller 300 | A | |
| 085404Roller Shades CAD Drawing: Roller 100/150/300 Dual-Mount Shade in 7″ x 11″ Pocket, Section View | Roller 100, Roller 300 | A |
Documents used with 085401
Lutron drawing 085402 is the matching elevation; 086106, 085267 and 085286 are the Roller 100, 150 and 300 specification submittals. Lutron's other Roller 100/150/300 section views are 085389, 085383, 085831, 085832, 085404, 085409, 085834 and 085833.
| Document | Type | Revision | Date |
|---|---|---|---|
| 086106Roller Shades Specification Submittal: Roller 100 | Specification Submittal | B | May 2017 |
| 085267Roller Shades Specification Submittal: Roller 150 | Specification Submittal | D | Apr 2024 |
| 085286Roller 300 Specification Submittal | Specification Submittal | D | Aug 2024 |
| 045627ROLLER 100/150/300 – Pocket Mount Chassis Installation Guide | Installation Guide | A | Feb 2019 |
| 045211Roller Shades Installation Guide: Angled Coupler Chassis Addendum | Installation Guide | A | |
| Roller Shades Revit Family: Dual Roller 100/150/200 (Ceiling Mount) | Revit Family | ||
| Roller Shades Revit Family: Dual Roller 100/150/200 (Wall Mount) | Revit Family | ||
| Roller Shades Revit Family: Roller 100/150/200 (Pocket Mount) | Revit Family | ||
| Roller Shades Revit Family: Roller 100/150/200 (Wall Mount) | Revit Family | ||
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
Revisions of 085401
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085401, and what to read next
Lutron drawing 085401 names no fastener size and gives no installation step for the shade or the pocket.
- Elevation of the pocket shade: 085402, the matching elevation view
- Pocket data: armstrongceilings.com, named in Lutron's note
Publisher and citation for document 085401
Lutron Electronics Co., Inc. publishes document 085401, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085401 filled in.
