You searched and this document matched it.
See all results085834 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Roller Shades CAD Drawing: Roller 100/150/300 Dual Narrow Wall Mount, Section View (085834)
Lutron's section through Sivoia QS Roller 100/150/300 shades in the dual narrow coupled configuration, wall mount drawn.
Lutron 085834 Rev A, Sivoia QS Roller Shades CAD Drawing: Roller 100/150/300 Dual Narrow Wall Mount, Section View. https://assets.lutron.com/a/documents/085834.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-shades-cad-drawing-085834/
About document 085834
Lutron drawing 085834, Rev A, is view 1, the 1/2 scale section titled R100 - Dual Narrow Coupled: pocket depth and height, tube and roll-up diameters, tube centers, projection adjustment and the mounting and clearance notes.
What drawing 085834 covers
Lutron document 085834 has these eight sections, all on its one page.
- Section view
- Mounting note, wall mount shown
- Clearance note on site adjustment
- Legend with view markers 1 and 2
- Pocket depth, pocket height and pocket flap callouts
- Tube diameter, tube center and roll-up callouts
- Sub-bracket, fastener, hanger, hembar and glazing callouts
- Title block with scale, view and revision
Specifications in 085834
Lutron document 085834 prints 18 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Pocket depth
- 7.00 in (178 mm)
- Pocket height
- 11.00 in (279 mm)
- 3 in pocket flap (optional)
- 2.89 in (74 mm)
- Tube diameter
- 2.56 in (65 mm)
- Tube diameter, optional WIDR
- 3.03 in (77 mm)
- Maximum roll-up diameter (printed twice)
- 4.00 in (102 mm)
- Tube center
- 6.75 in (171 mm)
- Tube center
- 3.88 in (99 mm)
- Tube center
- 2.88 in (73 mm)
- Tube center
- 2.75 in (70 mm)
- Projection adjust
- -0 in / +0.5 in
- Unlabeled dimension
- 1.88 in (48 mm)
- Unlabeled dimension
- 0.88 in (22 mm)
- Hembar
- Varies
Mounting note
PDF page 1 of 085834, opens in a new tab- Bracket mounting
- Ceiling or wall; wall mount shown
Title block
PDF page 1 of 085834, opens in a new tab- Scale
- 1/2
- View
- 1
- Revision
- A
Facts Lutron states in 085834
The values Lutron document 085834 states, as published:
- Subject
- Roller 100/150/300 dual narrow coupled shades, titled R100 - Dual Narrow Coupled, section view, wall mount shown
- Pocket depth
- 7.00 in (178 mm)
- Pocket height
- 11.00 in (279 mm)
- Pocket flap
- Optional 3 in pocket flap, dimensioned 2.89 in (74 mm)
- Tube diameter
- 2.56 in (65 mm), or 3.03 in (77 mm) with the optional WIDR tube
- Maximum roll-up
- 4.00 in (102 mm) diameter, printed twice
- Tube centers
- Four printed, reference face not stated
- 6.75 in (171 mm)
- 3.88 in (99 mm)
- 2.88 in (73 mm)
- 2.75 in (70 mm)
- Projection adjust
- -0 in / +0.5 in, printed in inches only
- Other callouts
- 1.88 in (48 mm) and 0.88 in (22 mm) without labels
- Hembar marked as varying
- Glazing shown as typical
- Parts and fixings labeled
- Sub-bracket, wall fasteners and an optional hanger shown without tile support
- Mounting
- Ceiling or wall on the same bracket, per Lutron's note, wall mount drawn
- Clearances
- Factory-supplied shades have the clearances they need, and the installer keeps them once adjustment features are used
- Adjustments at maximum roll diameter
- Not every adjustment is available at the maximum roll diameter
- Scale, view, revision and formats
- 1/2 scale, view 1, revision A, as PDF, DWG and DXF
Questions about document 085834
The answers come from Lutron document 085834 and New Way's record of it.
What is Lutron drawing 085834?
Lutron's one-sheet CAD section at 1/2 scale, published as PDF, DWG and DXF with no date printed.
Which revision of 085834 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085834 cover?
Lutron Sivoia QS roller shades.
How big a pocket do wall-mounted dual narrow coupled shades need?
Lutron drawing 085834 prints a pocket depth of 7.00 in (178 mm).
- Pocket height: 11.00 in (279 mm)
- Optional 3 in pocket flap: 2.89 in (74 mm)
What roll-up does the section allow?
Lutron drawing 085834 shows a maximum roll-up of 4.00 in (102 mm), printed twice.
- Tube diameter: 2.56 in (65 mm)
- Optional WIDR tube: 3.03 in (77 mm)
Can the bracket on Lutron drawing 085834 also be ceiling mounted?
Yes, Lutron's note on drawing 085834 says the bracket supports ceiling or wall mounting. The section shows the wall mount with the sub-bracket and wall fasteners labeled.
Lutron drawing 085409 is the dual narrow coupled section view.
How much projection adjustment is there, and what must the installer watch?
Lutron prints a projection adjust of -0 in / +0.5 in on drawing 085834, in inches only.
Lutron's clearance note makes the installer keep the clearances once an adjustment feature is used. Not every adjustment is available at the maximum roll diameter.
Does the pocket need a flap or a tile support?
Lutron drawing 085834 marks the 3 in pocket flap as optional, dimensioned 2.89 in (74 mm), and draws an optional hanger shown without tile support. Lutron's drawing does not say which ceiling finish calls for either.
Other Sivoia QS CAD drawings
CAD drawings for the same Sivoia QS system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085833Roller Shades CAD Drawing: Roller 100/150/300 Dual Wall Mount in 7″X11″ Pocket, Section View | Roller 100, Roller 300 | A | |
| 085400Roller Shades CAD Drawing: Roller 100/150/300 Dual Left Sub-Bracket, Detail Drawing | Roller 100, Roller 300 | A | |
| 085403Roller Shades CAD Drawing: Roller 100/150/300 Dual Right Sub-Bracket, Detail Drawing | Roller 100, Roller 300 | A | |
| 085517Roller 100 CAD Drawing: Dual Narrow Sub-Bracket, Detail Drawing | Roller 100 | A |
Documents used with 085834
Lutron drawings 085400, 085403 and 085517 are the dual left, dual right and Roller 100 dual narrow sub-bracket details. Lutron drawing 085833 is the dual wall mount 7 in x 11 in pocket section view.
| Document | Type | Revision | Date |
|---|---|---|---|
| 086106Roller Shades Specification Submittal: Roller 100 | Specification Submittal | B | May 2017 |
| 045627ROLLER 100/150/300 – Pocket Mount Chassis Installation Guide | Installation Guide | A | Feb 2019 |
| 045211Roller Shades Installation Guide: Angled Coupler Chassis Addendum | Installation Guide | A | |
| Roller Shades Revit Family: Dual Roller 100/150/200 (Wall Mount) | Revit Family | ||
| Roller Shades Revit Family: Dual Roller 100/150/200 (Ceiling Mount) | Revit Family | ||
| Roller Shades Revit Family: Roller 100/150/200 (Pocket Mount) | Revit Family | ||
| Roller Shades Revit Family: Roller 100/150/200 (Wall Mount) | Revit Family | ||
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 085274Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
Revisions of 085834
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085834, and what to read next
Lutron drawing 085834 prints the wall-mounted section only, with no elevation and no labeled light gap, bracket or fastener size.
Publisher and citation for document 085834
Lutron Electronics Co., Inc. publishes document 085834, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085834 filled in.
