You searched and this document matched it.
See all results085427 · CAD Drawing · Rev A · English · PDF, 1 page, 0.3 MB
Lutron Sivoia QS Roller Shades CAD Drawing: Roller 64 Fascia Mount Shade with 3.5″ Top Back Cover and 3.5″ Round Fascia, Section View (085427)
Lutron's section view of a Roller 64 fascia mount shade with a 3.5 in round fascia, for head details.
Lutron 085427 Rev A, Sivoia QS Roller Shades CAD Drawing: Roller 64 Fascia Mount Shade with 3.5 in. Top Back Cover and 3.5 in. Round Fascia, Section View. https://assets.lutron.com/a/documents/0031-r064-rfm-s.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-shades-cad-drawing-roller-64-fascia-mount-shade-with-3-5-top-back-cover-and-3-5-round-fascia-section-view/
About document 085427
Lutron drawing 085427, revision A, is the one-page section of the Roller 64 shade with a 3.5 in top back cover and round fascia: fascia, tube, roll-up and tube center dimensions, mounting and clearance notes.
What drawing 085427 covers
Lutron document 085427 has these five sections, all on its one page.
- Section view with dimensions
- Legend (top view)
- Mounting configuration note
- Clearance and adjustment note
- Title block
Specifications in 085427
Lutron document 085427 prints 17 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
View 1, section view
PDF page 1 of 085427, opens in a new tab- Fascia and top back cover height
- 3.50 in (89 mm)
- Fascia and top back cover depth
- 3.50 in (89 mm)
- Fascia depth
- 2.38 in (60 mm)
- Tube diameter
- 1.67 in (43 mm)
- Maximum roll-up diameter
- 2.75 in (70 mm)
- Tube center
- 1.88 in (48 mm)
- Tube center
- 1.88 in (48 mm)
- Unlabeled dimension
- 0.50 in (13 mm)
- Hembar
- Varies
- Glazing
- Typical
- Fasteners drawn
- Wall fasteners
- Bracket mounting
- Ceiling, wall or jamb; wall mount shown
Title block
PDF page 1 of 085427, opens in a new tab- Drive
- Roller 64
- Drawing
- 085427
- Scale
- 3/4
- View
- 1
- Revision
- A
Facts Lutron states in 085427
The values Lutron document 085427 states, as published:
- What the drawing shows
- A section through a Roller 64 fascia mount shade with 3.5 in top back cover and 3.5 in round fascia
- Fascia and cover height
- 3.50 in (89 mm), fascia and top back cover
- Fascia and cover depth
- 3.50 in (89 mm), fascia and top back cover
- Fascia depth
- 2.38 in (60 mm)
- Tube diameter
- 1.67 in (43 mm)
- Maximum roll-up
- 2.75 in (70 mm) diameter
- Tube center
- Two dimensions labeled tube center, both 1.88 in (48 mm), with no datum given in words
- Unlabeled dimension
- 0.50 in (13 mm), unlabeled
- Mounting
- The bracket supports ceiling, wall and jamb mounting, with the wall mount and wall fasteners drawn
- Clearances
- A shade installed as supplied has the clearances it needs
- Adjustments
- The installer keeps the clearances if the adjustment features are used
- Adjustment at full roll
- Not every adjustment is available at the maximum roll diameter
- Hembar and glazing
- Hembar marked as varying, glazing marked as typical
- Title block
- Roller 64, drawing 085427, scale 3/4, view 1, revision A
Questions about document 085427
The answers come from Lutron document 085427 and New Way's record of it.
What is Lutron drawing 085427?
Lutron drawing 085427 is view 1 at scale 3/4, revision A, with a legend drawn as a top view.
Which revision of 085427 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085427 cover?
Lutron Sivoia QS roller shades.
How much head space does the round fascia shade need?
Lutron drawing 085427 dimensions the fascia and top back cover at 3.50 in (89 mm) high and 3.50 in (89 mm) deep.
- Round fascia depth: 2.38 in (60 mm)
- Tube: 1.67 in (43 mm) diameter
- Maximum roll-up: 2.75 in (70 mm) diameter
Can the bracket mount to a ceiling or a jamb?
Lutron's note on drawing 085427 says the bracket supports ceiling, wall and jamb mounting. Lutron draws the wall mount, with the wall fasteners shown.
What happens to the clearances if the bracket adjustments are used?
Lutron drawing 085427 states that a shade fitted as the factory supplies it has the clearances it needs to run. An installer who uses the adjustment features must keep those clearances.
Lutron adds that some adjustments are unavailable at the maximum roll diameter.
Where does the tube center sit on drawing 085427?
Lutron drawing 085427 prints two figures labeled tube center, both 1.88 in (48 mm). Lutron gives no datum in words for either, so read each dimension line on the PDF first.
Does drawing 085427 fix the hembar and glazing positions?
Lutron drawing 085427 marks the hembar as varying and the glazing as typical. Neither is a fixed dimension on the sheet.
Other Sivoia QS CAD drawings
CAD drawings for the same Sivoia QS system:
All 142 Sivoia QS CAD drawingsDocuments used with 085427
Lutron drawing 085430 is the same shade's 3.5 in square fascia section; 045617 is the installation guide, 085705 the submittal. Lutron drawings 085619 and 085521 detail the Roller 64's 3.5 in top back cover and 3.5 in fascia shade bracket.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045617Roller Shades Installation Guide: Roller 20/64, Fascia Mount Chassis | Installation Guide | A | Apr 2018 |
| 085705Roller 64 Specification Submittal | Specification Submittal | D | Sep 2025 |
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| 369847Pico Wireless Control, 4-Button Specification Submittal | Specification Submittal | K | Mar 2024 |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 085274Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 048863Roller Shades Application Note: Fabric Aesthetic Characteristics | Application Note | A | May 2026 |
| 0454114-Group RF Remote Control Installation Guide | Installation Guide | D | Jan 2015 |
| 045520Basic Wiring and Setup Installation Guide | Installation Guide | B | Nov 2016 |
Revisions of 085427
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085427, and what to read next
Lutron drawing 085427 gives the section only: no elevation, light gaps, shade size limits, fixing sizes or wiring.
Publisher and citation for document 085427
Lutron Electronics Co., Inc. publishes document 085427, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085427 filled in.
