You searched and this document matched it.
See all results085705 · Specification Submittal · Rev D · Sep 2025 · English · PDF, 12 pages, 8.6 MB
Lutron Sivoia QS Roller 64 Specification Submittal (085705, rev D)
Lutron's specification submittal for Sivoia QS and QS Wireless Roller 64 shades, the sheet a specifier attaches to a tender.
Lutron 085705 Rev D (September 2025), Sivoia QS Roller 64 Specification Submittal. https://assets.lutron.com/a/documents/085705.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/lutron-sivoia-qs-roller-64-specification-submittal-085705/
About document 085705
Lutron document 085705, Rev D of September 2025, is the Roller 64 specification submittal: widths, noise, light gap, alignment, speed, Class 2 35 V DC supplies, capacity, environment, controls, shade options, brackets and wiring.
What submittal 085705 covers
Lutron document 085705 has these 14 sections. Each link opens the PDF at that page in a new tab.
- Roller 64 overview and features, opens in a new tab page 1
- Specifications: low voltage power and compatible power sources, opens in a new tab page 2
- Flexible configuration, system capacity and environment, opens in a new tab page 2
- Precision control, controls and integration, opens in a new tab page 2
- Shade options, opens in a new tab page 3
- Roller 64 universal bracket, opens in a new tab page 4
- Roller 64 dual-mount bracket, opens in a new tab page 5
- Roller 64 3.5 inch fascia-mount bracket, opens in a new tab page 6
- Roller 64 WIDR universal bracket, opens in a new tab page 7
- Roller 64 WIDR dual-mount bracket, opens in a new tab page 8
- WIDR 4 inch regular roll fascia bracket, opens in a new tab page 9
- WIDR 4 inch reverse roll fascia bracket, opens in a new tab page 9
- Sivoia QS single drive wiring, opens in a new tab page 11
- Sivoia QS Wireless single drive wiring, opens in a new tab page 12
Specifications in 085705
Lutron document 085705 prints 60 values in the groups the document uses, each with the document's unit. A row names the catalog codes it applies to. The page link beside each group opens the PDF where the group starts.
- Standard widths, Roller 64
- 17.5 in (444.5 mm) up to 8 ft (2.438 m)
- Standard widths, Roller 64 WIDR
- 17.5 in (444.5 mm) up to 12 ft (3.657 m)
- Noise
- 35 dBA max., measured 3 ft (1 m) from the EDU
- Light gap, standard
- 3/4 in (19 mm) from fabric to the outside edge of the brackets, both sides
- Alignment, shades moving in unison
- Within 1/8 in (3 mm)
- Bottom bar speed
- 3.6 in/sec (91.4 mm/sec)
- Cabling
- QS wired: low-voltage power and communication in one 4-wire cable; QS Wireless: low-voltage power by 2-wire cable
Low voltage power
PDF page 2 of 085705, opens in a new tab- Operating voltage
- Class 2, 35 V DC
- Power source
- Lutron NEC Class 2 power supply
- Overvoltage protection
- ±10% of line voltage, from the Lutron power supply
- Power failure protection
- Shade programming kept when drive power is lost; power failure memory for the lifetime of the product
Compatible power sources
PDF page 2 of 085705, opens in a new tab- Individual plug-in
- QSPS-P1-1-35V (NEMA 5-15 plug), QSPS-P2-1-35V (CEE 7/7 plug), QSPS-P3-1-35V (BS 1363 plug)Models: QSPS-P1-1-35V, QSPS-P2-1-35V, QSPS-P3-1-35V
- 10-output power panels
- QSPS-10PNL, QSPSY-10PNLModels: QSPS-10PNL, QSPSY-10PNL
- Configurable power panels
- QSPS-10PNL-NPM or QSPS-30PNL-NPM with WIN-PS-5CC-R installedModels: QSPS-10PNL-NPM, QSPS-30PNL-NPM, WIN-PS-5CC-R
- Individual junction box
- QSPS-J-1-35VModels: QSPS-J-1-35V
System capacity
PDF page 2 of 085705, opens in a new tab- Standalone QS configuration
- 100 QS devices; 100 QS zones
Environment
PDF page 2 of 085705, opens in a new tab- Temperature
- 32 °F to 104 °F (0 °C to 40 °C)
- Humidity
- 0% to 90%, non-condensing
Precision control
PDF page 2 of 085705, opens in a new tab- Stopping accuracy
- Within 1/8 in (3 mm) of programmed open, close and preset positions
- Intelligent Hembar Alignment (IHA)
- Within 1/8 in (3 mm), stopped or moving
- QS wired control systems
- Athena, HomeWorks QS, HomeWorks QSX, Quantum, myRoom, myRoom XC
- QS wired local control
- GRAFIK Eye QS shade columns, low-voltage QS keypads; Radio Window sensors in HomeWorks QS or Quantum
- QS Wireless control systems
- HomeWorks QSX, myRoom, myRoom XC, RadioRA 2, RA2 Select, RadioRA 3, Caséta PRO
- QS Wireless local control
- Pico or 4-Group handheld remote, QS Wireless keypads
- Integration
- Contact closure, RS232 and Ethernet
Shade options
PDF page 3 of 085705, opens in a new tab- Mounting
- Pocket, inside the window frame or outside the window frame
- Drive side
- Left or right
- Fabric drop
- Regular roll or reverse roll
- Sealed bottom bar sizes
- 3/16 x 1 in (5 x 25 mm) or 7/16 x 1 3/8 (11 x 35 mm)
- Fabric types
- Sheer, privacy, room darkening
Roller 64 universal bracket
PDF page 4 of 085705, opens in a new tab- Values on the bracket views
- 1.00 in (25 mm); 1.95 in (50 mm); 2.17 in (55 mm)
- Maximum rollup and projection drawing
- Max. 3.30 in (84 mm); Max. 3.00 in (76 mm); Min. 0.30 in (7 mm); 1.67 in (42 mm)
- Pocket installation drawing
- 3.50 in (89 mm); 3.50 in (89 mm); 2.375 in (60 mm)
- Endcap
- For wall or ceiling mount, outside mount only, white only
Roller 64 dual-mount bracket
PDF page 5 of 085705, opens in a new tab- Values on the bracket views
- 2.31 in (59 mm); 3.90 in (99 mm); 6.25 in (159 mm)
- Maximum rollup and projection drawing
- Max 4.32 in (110 mm); Max. 3.00 in (76 mm)
- Pocket installation drawing
- 5.50 in (140 mm); 7.50 in (190.5 mm); 2.89 in (73 mm)
Roller 64 3.5 inch fascia-mount bracket
PDF page 6 of 085705, opens in a new tab- Values on the bracket views
- 1.00 in (25 mm); 3.38 in (86 mm); 3.38 in (86 mm)
- Fascia system section view
- 3.38 in (86 mm); 3.43 in (87 mm); 3.45 in (88 mm)
- Inside mount deduction
- 3/8 in (10 mm) off the bracket-to-bracket distance; not applied automatically in the ordering tool
- Minimum light gap, inside mount with endcaps
- 15/16 in (23.8 mm)
Roller 64 WIDR universal bracket
PDF page 7 of 085705, opens in a new tab- Values on the bracket views
- 1.34 in (34 mm); 3.00 in (76 mm); 2.00 in (51 mm)
- Maximum rollup and projection drawing
- Max. 3.30 in (84 mm); Max. 3.60 in (99 mm), as printed; Min. 0.30 in (7 mm); 2.00 in (52 mm)
- Pocket installation drawing
- 4.00 in (102 mm); 4.00 in (102 mm); 2.375 in (60 mm)
Roller 64 WIDR dual-mount bracket
PDF page 8 of 085705, opens in a new tab- Values on the bracket views
- 2.31 in (59 mm); 4.88 in (123 mm); 7.00 in (178 mm)
- Maximum rollup and projection drawing
- 4.88 in (123 mm); Max. 3.30 in (84 mm)
- Pocket installation drawing
- 5.50 in (140 mm); 7.50 in (190.5 mm); 2.89 in (73 mm)
Roller 64 WIDR 4 inch regular roll fascia-mount bracket
PDF page 9 of 085705, opens in a new tab- Values on the bracket views
- 1.34 in (34 mm); 3.84 in (97.5 mm); 3.88 in (98.6 mm)
- Fascia system section view
- 4.00 in (102 mm); 4.00 in (102 mm)
Roller 64 WIDR 4 inch reverse roll fascia-mount bracket
PDF page 10 of 085705, opens in a new tab- Values on the bracket views
- 1.34 in (34 mm); 3.83 in (97.5 mm); 3.26 in (83 mm); 0.15 to 0.26 in (4 mm to 6.6 mm)
- Fascia system section view
- 4.00 in (102 mm); 4.00 in (102 mm)
Sivoia QS single drive wiring
PDF page 11 of 085705, opens in a new tab- Wire type A, keypad power and communication
- 18 to 22 AWG (1.0 to 0.5 mm²), 250 ft (75 m) max., MUX/MUX shielded twisted pairModels: GRX-CBL-346S-500
- Wire type B, drive power, 12 AWG (4.0 mm²)
- 250 ft (75 m) max.
- Wire type B, drive power, 16 AWG (1.5 mm²)
- 100 ft (30 m) max.
- Wire type B, drive power, 18 AWG (1.0 mm²)
- 50 ft (17 m) max.
- Drive power cable
- Non-plenum QSHY-CBL-M-1000; plenum QSHY-CBLP-M-1000Models: QSHY-CBL-M-1000, QSHY-CBLP-M-1000
- Drive connector
- 4-pin EDU connector: MUX, MUX, V+, Com
Sivoia QS Wireless single drive wiring
PDF page 12 of 085705, opens in a new tab- Terminals 3 and 4
- Wired communication only; not used in wireless installations
- RF receiver
- QS Wireless only; drive RF and receiver connectors pre-wired
- Plug-in power supplies on the wiring pages
- QSPS-P1-1-35V NEMA 5-15; QSPS-P2-1-35V CEE 7/7; QSPS-P3-1-35V BS 1363; QSPS-P4-1-35V JIS C 8303Models: QSPS-P1-1-35V, QSPS-P2-1-35V, QSPS-P3-1-35V, QSPS-P4-1-35V
Facts Lutron states in 085705
The values Lutron document 085705 states, as published:
- Standard widths
- Roller 64: 17.5 in (444.5 mm) up to 8 ft (2.438 m)
- Roller 64 WIDR: 17.5 in (444.5 mm) up to 12 ft (3.657 m)
- Fabric choice may limit the maximum size
- Noise
- 35 dBA maximum at 3 ft (1 m) from the EDU, with smooth, silent starts and stops
- Light gap
- 3/4 in (19 mm) from the fabric to the outside bracket edge, both sides
- Inside mounts with endcaps on fascia brackets: minimum 15/16 in (23.8 mm)
- Tall narrow shades may get a fabric deduction
- Alignment and speed
- Shades move in unison within 1/8 in (3 mm)
- Shades stop within 1/8 in (3 mm) of programmed positions
- Bottom bar speed 3.6 in/sec (91.4 mm/sec)
- Power
- Class 2, 35 V DC from a Lutron NEC Class 2 power supply, with programming that survives power loss.
- Compatible power sources
- Plug-in: QSPS-P1-1-35V, QSPS-P2-1-35V, QSPS-P3-1-35V
- 10-output panels: QSPS-10PNL, QSPSY-10PNL
- Configurable panels: QSPS-10PNL-NPM, QSPS-30PNL-NPM, with WIN-PS-5CC-R
- Junction box: QSPS-J-1-35V
- System capacity and environment
- Standalone QS system: 100 QS devices and 100 QS zones
- 32 to 104 °F (0 to 40 °C)
- 0 to 90% humidity non-condensing
- Control systems
- QS wired: Athena, HomeWorks QS, HomeWorks QSX, Quantum, myRoom, myRoom XC
- Also GRAFIK Eye QS shade columns and QS keypads
- QS Wireless: HomeWorks QSX, myRoom, myRoom XC, RadioRA 2, RA2 Select, RadioRA 3, Caséta PRO
- Plus Pico and 4-Group remotes
- Drive power wiring
- 12 AWG (4.0 mm²) up to 250 ft (75 m)
- 16 AWG (1.5 mm²) up to 100 ft (30 m)
- 18 AWG (1.0 mm²) up to 50 ft (17 m)
- Keypad power and communication: 18 to 22 AWG (1.0 to 0.5 mm²)
- Keypad shielded twisted pair up to 250 ft (75 m)
- Inside mount deduction
- Inside mount with endcaps on a fascia bracket: remove 3/8 in (10 mm)
- Taken off the bracket-to-bracket distance
- The ordering tool does not apply this deduction automatically
- Bracket and pocket finishes
- All brackets in white; 4 in fascia brackets in black or white
- Pockets, dual pockets and their endcaps: white, silver, bronze or black
- 3.5 in and 4 in fascias, endcaps: white, gray, bronze or black
- Bottom bar options
- Designer bottom bar (standard)
- Sealed bottom bar: 3/16 x 1 in (5 x 25 mm) or 7/16 x 1 3/8 (11 x 35 mm)
- Half-wrap architectural with plastic endcaps
- Exposed architectural
- 1 in (25 mm) exposed
- The last three: white, black, bronze, silver or custom-colored
- Blackout and bottom bar concealment
- Complete blackout needs side channels
- Plus a pocket or a fascia with top back cover
- Pockets, fascias and top treatments do not fully hide the bottom bar
- Upper limit keeps the bottom bar out of the pocket or brackets
- Dual-mount brackets
- Roller 64 and WIDR dual-mount brackets carry two fabric rolls in one dual pocket, typically a sheer and a blackout.
Questions about document 085705
The answers come from Lutron document 085705 and New Way's record of it.
What is Lutron document 085705?
Lutron's twelve-page Roller 64 submittal, dated 25 September 2025 in the footers under 085705d, wiring on the last two pages.
Which revision of 085705 is current?
Rev D, dated September 2025, is the revision Lutron publishes. New Way checked it against assets.lutron.com on 15 October 2026.
Which roller shades does 085705 cover?
Lutron Sivoia QS roller shades in the Roller 64 drive class.
How wide can a Lutron Roller 64 shade be?
Up to 8 ft (2.438 m) for Roller 64, from 17.5 in (444.5 mm), per Lutron document 085705.
- Roller 64 WIDR: 17.5 in (444.5 mm) up to 12 ft (3.657 m)
- The fabric chosen may limit the maximum size
How quiet is the Roller 64 drive?
35 dBA or less, measured 3 ft (1 m) from the EDU, per Lutron document 085705. Lutron adds smooth, silent starts and stops.
What power does a Sivoia QS Roller 64 shade need?
Class 2, 35 V DC from a Lutron NEC Class 2 power supply, per Lutron document 085705.
- Plug-in: QSPS-P1-1-35V, QSPS-P2-1-35V, QSPS-P3-1-35V
- Panels: QSPS-10PNL, QSPSY-10PNL, QSPS-10PNL-NPM, QSPS-30PNL-NPM (with WIN-PS-5CC-R)
- Junction box: QSPS-J-1-35V
What wire gauge does the drive power run take?
12 AWG (4.0 mm²) up to 250 ft (75 m) between power supply and drive, per Lutron document 085705.
- 16 AWG (1.5 mm²): up to 100 ft (30 m)
- 18 AWG (1.0 mm²): up to 50 ft (17 m)
- Cables: QSHY-CBL-M-1000, or QSHY-CBLP-M-1000 in plenum
Can a sheer and a blackout share one window on Roller 64?
Yes. Lutron document 085705 offers dual-mount brackets for Roller 64 and WIDR that hold two fabric rolls in one window.
Typically that is a sheer and a blackout. Lutron document 085705 lists dual pockets and endcaps in white, silver, bronze and black.
Other Sivoia QS specification submittals
Specification submittals for the same Sivoia QS system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 0853144-Group RF Remote Control Specification Submittal | C | May 2016 | |
| 085274Hard Wired Power Supply Specification Submittal | D | Aug 2014 | |
| 369847Pico Wireless Control, 4-Button Specification Submittal | K | Mar 2024 | |
| 369374Roller Shades Specification Submittal: QS Contact Closure Input/Output Interface | H | Apr 2026 |
Documents used with 085705
Lutron documents 045929, 045930, 045937 and 045843 are the Roller 64 WIDR fascia, standard and pocket mount chassis guides. Lutron document 045520 is the wiring and setup guide; 086112 and 085286 are the Roller 20 and 300 specification submittals.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045929Roller 64 Installation Guide: WIDR, 4″ Fascia Mount Chassis (Regular Roll) | Installation Guide | B | Aug 2023 |
| 045930Roller 64 Installation Guide: WIDR, 4″ Fascia Mount Chassis (Reverse Roll) | Installation Guide | B | Aug 2023 |
| 045937Roller 64 Installation Guide: WIDR, Standard Single & Dual Mount Chassis (Universal Bracket) | Installation Guide | A | Aug 2023 |
| 045843Roller 64 Installation Guide: WIDR Pocket Mount | Installation Guide | B | Sep 2021 |
| 045520Basic Wiring and Setup Installation Guide | Installation Guide | B | Nov 2016 |
| Roller 64 CAD Drawing: 3.5 in [90 mm] Pocket | CAD Drawing | ||
| Roller 64 CAD Drawing: 3.5 in x 3.5 in [90 mm x 90 mm] Pocket Mount, Elevation View | CAD Drawing | ||
| Roller 64 Revit Family: Ceiling Mount | Revit Family | ||
| Roller 64 Revit Family: Dual (Ceiling Mount) | Revit Family | ||
| Roller 64 Revit Family: Dual (Wall Mount) | Revit Family |
Revisions of 085705
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| D | Sep 2025 | Current. The file on assets.lutron.com. Checked 15 Oct 2026. |
Not covered in 085705, and what to read next
Lutron document 085705 gives no mounting steps, fastener rules or limit setting; read the installation guide shipped with the shade.
Publisher and citation for document 085705
Lutron Electronics Co., Inc. publishes document 085705, Rev D, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 15 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085705 filled in.
