You searched and this document matched it.
See all results085537 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Roller 20 CAD Drawing: Dual Mount Shade, Elevation View (085537)
Lutron's elevation view of the Sivoia QS Roller 20 dual mount shade, with the minimum sizes and light gap.
Lutron 085537 Rev A, Sivoia QS Roller 20 CAD Drawing: Dual Mount Shade, Elevation View. https://assets.lutron.com/a/documents/085537.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/roller-20-dual-mount-shade-elevation-view/
About document 085537
Lutron drawing 085537, revision A, is the elevation view of the dual mount shade, giving the minimum shade width, minimum shade height and minimum light gap, the mounting note and the clearance note.
What drawing 085537 covers
Lutron document 085537 has these five sections, all on its one page.
- Elevation view of the dual mount shade
- Legend (top view)
- Mounting configuration note
- Clearance note on the adjustment features
- Title block with number, scale, view and revision
Specifications in 085537
Lutron document 085537 prints three values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Minimum width of shade
- 18.5 in (470 mm)
- Minimum shade height
- 12 in (305 mm)
- Minimum light gap
- 0.75 in (19 mm)
Facts Lutron states in 085537
The values Lutron document 085537 states, as published:
- Shade covered
- Roller 20 dual mount shade
- Minimum width of shade
- 18.5 in (470 mm)
- Minimum shade height
- 12 in (305 mm)
- Minimum light gap
- 0.75 in (19 mm)
- Unlabeled dimension
- 5.13 in (131 mm), unlabeled
- Mounting
- the bracket supports ceiling, wall or jamb mounting, wall mount shown
- Clearances after adjustment
- A factory-supplied shade has the clearances it needs
- An installer who uses the adjustment features must keep them
- Not every adjustment is available at the maximum roll diameter
- Scale, view and revision
- scale 1/4, view 2, revision A
- File formats
- PDF, with DWG and DXF files of the same drawing
Questions about document 085537
The answers come from Lutron document 085537 and New Way's record of it.
What is Lutron document 085537?
Lutron's one-page elevation view, numbered view 2 at 1/4 scale, revision A, with a legend drawn as a top view. Lutron publishes the elevation as a PDF with DWG and DXF files; the matching section view is drawing 085533.
Which revision of 085537 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085537 cover?
Lutron Sivoia QS roller shades in the Roller 20 drive class.
What minimum width does drawing 085537 give?
Lutron drawing 085537 gives a minimum width of shade of 18.5 in (470 mm).
What minimum height and light gap does the dual mount elevation show?
Lutron drawing 085537 shows a minimum shade height of 12 in (305 mm) and a minimum light gap of 0.75 in (19 mm).
Where can the Roller 20 dual mount bracket be fixed?
Lutron drawing 085537 notes that the bracket supports ceiling, wall or jamb mounting, and the elevation shows the wall mount.
What is the unlabeled 5.13 in (131 mm) dimension on the elevation?
Lutron drawing 085537 prints one 5.13 in (131 mm) dimension without a label and does not say what it measures. The dual bracket details are drawings 085540 and 085541.
What happens to clearances if the installer uses the adjustment features?
Lutron drawing 085537 makes keeping proper clearances the installer's responsibility once the adjustment features are used.
A shade installed as supplied by the factory has the clearances needed for proper operation. Not every adjustment is available at the maximum roll diameter.
Other Sivoia QS Roller 20 CAD drawings
CAD drawings for the same Sivoia QS Roller 20 drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085540Roller 20 CAD Drawing: Dual Left Shade Bracket, Detail Drawing | Roller 20 | A | |
| 085533Roller 20 CAD Drawing: Dual Mount Shade, Section View | Roller 20 | A | |
| 085541Roller 20 CAD Drawing: Dual Right Shade Bracket, Detail Drawing | Roller 20 | A | |
| 085539Roller 20 CAD Drawing: Fascia Shade Bracket, Detail Drawing | Roller 20 | A |
Documents used with 085537
Lutron drawing 085533 is the matching section view; the dual and custom pocket lineal detail is another Sivoia QS drawing. Drawings 085540 and 085541 (dual left and right brackets) and 085538 and 085539 (universal and fascia brackets) detail the brackets.
| Document | Type | Revision | Date |
|---|---|---|---|
| 086112Roller 20 Specification Submittal | Specification Submittal | A | Jun 2026 |
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 085274Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 048863Roller Shades Application Note: Fabric Aesthetic Characteristics | Application Note | A | May 2026 |
| 0454114-Group RF Remote Control Installation Guide | Installation Guide | D | Jan 2015 |
| 045520Basic Wiring and Setup Installation Guide | Installation Guide | B | Nov 2016 |
| Revit Family: QS J-Box 35V Power Supply | Revit Family | ||
| Revit Family: QS Smart Power Panel, 30 Output | Revit Family |
Revisions of 085537
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085537, and what to read next
Lutron drawing 085537 gives the minimum width, height and light gap only: no pocket, tube, roll-up, bracket or fixing figures.
Publisher and citation for document 085537
Lutron Electronics Co., Inc. publishes document 085537, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085537 filled in.
