You searched and this document matched it.
See all results085533 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Roller 20 CAD Drawing: Dual Mount Shade, Section View (085533)
Lutron's section view of the Sivoia QS Roller 20 dual mount shade, with the pocket size the dual shade needs.
Lutron 085533 Rev A, Sivoia QS Roller 20 CAD Drawing: Dual Mount Shade, Section View. https://assets.lutron.com/a/documents/085533.pdf, via https://newwaykl.com/resources/lutron/roller-shades/sivoia-qs/roller-20-dual-mount-shade-section-view/
About document 085533
Lutron drawing 085533, revision A, is the section view of the dual mount shade, giving the pocket depth and height, tube diameter, tube center dimensions, maximum roll-up diameter, mounting note and clearance note.
What drawing 085533 covers
Lutron document 085533 has these five sections, all on its one page.
- Section view of the dual mount shade
- Legend (top view)
- Mounting configuration note
- Clearance note on the adjustment features
- Title block with number, scale, view and revision
Specifications in 085533
Lutron document 085533 prints seven values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
- Pocket depth
- 6.00 in (152 mm)
- Pocket height
- 9.00 in (229 mm)
- Tube diameter
- 1.28 in (33 mm)
- Max rollup, diameter (marked twice)
- 2.40 in (61 mm)
- Tube center (marked twice)
- 1.44 in (37 mm)
- Tube center
- 2.44 in (63 mm)
- Tube center
- 3.88 in (98 mm)
Facts Lutron states in 085533
The values Lutron document 085533 states, as published:
- Shade covered
- Roller 20 dual mount shade
- Pocket depth
- 6.00 in (152 mm)
- Pocket height
- 9.00 in (229 mm)
- Tube diameter
- 1.28 in (33 mm) diameter
- Maximum roll-up diameter
- 2.40 in (61 mm), marked twice on the section
- Tube center dimensions shown
- 1.44 in (37 mm), marked twice
- 2.44 in (63 mm)
- 3.88 in (98 mm)
- Fixings and parts labeled
- wall fasteners, hembar (varies), glazing (typical)
- Mounting
- the bracket supports ceiling, wall or jamb mounting, wall mount shown
- Clearances after adjustment
- A factory-supplied shade has the clearances it needs
- An installer who uses the adjustment features must keep them
- Not every adjustment is available at the maximum roll diameter
- Scale, view and revision
- scale 1/2, view 1, revision A
- File formats
- PDF, with DWG and DXF files of the same drawing
Questions about document 085533
The answers come from Lutron document 085533 and New Way's record of it.
What is Lutron document 085533?
Lutron's one-page section view, numbered view 1 at 1/2 scale, revision A, with a legend drawn as a top view. Lutron publishes the section as a PDF with DWG and DXF files; the matching elevation view is drawing 085537.
Which revision of 085533 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085533 cover?
Lutron Sivoia QS roller shades in the Roller 20 drive class.
What pocket size does drawing 085533 give?
Lutron drawing 085533 dimensions the pocket at 6.00 in (152 mm) deep and 9.00 in (229 mm) high.
What tube and roll-up diameters does the dual mount section show?
Lutron drawing 085533 shows a 1.28 in (33 mm) tube diameter and a 2.40 in (61 mm) maximum roll-up diameter. The maximum roll-up is marked twice on the section.
Where are the tube centers on the dual mount section?
Lutron drawing 085533 marks three tube center dimensions; the drawing itself shows which edge each is taken from.
- 1.44 in (37 mm), marked twice
- 2.44 in (63 mm)
- 3.88 in (98 mm)
Can the dual mount bracket fix to the ceiling or jamb?
Yes. Lutron drawing 085533 notes that the bracket supports ceiling, wall or jamb mounting.
The section shows the wall mount with wall fasteners.
What happens to clearances if the installer uses the adjustment features?
Lutron drawing 085533 makes keeping proper clearances the installer's responsibility once the adjustment features are used.
A shade installed as supplied by the factory has the clearances needed for proper operation. Not every adjustment is available at the maximum roll diameter.
Other Sivoia QS Roller 20 CAD drawings
CAD drawings for the same Sivoia QS Roller 20 drive class:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085540Roller 20 CAD Drawing: Dual Left Shade Bracket, Detail Drawing | Roller 20 | A | |
| 085537Roller 20 CAD Drawing: Dual Mount Shade, Elevation View | Roller 20 | A | |
| 085541Roller 20 CAD Drawing: Dual Right Shade Bracket, Detail Drawing | Roller 20 | A | |
| 085539Roller 20 CAD Drawing: Fascia Shade Bracket, Detail Drawing | Roller 20 | A |
Documents used with 085533
Lutron drawing 085537 is the matching elevation view; the dual and custom pocket lineal detail is another Sivoia QS drawing. Drawings 085540 and 085541 (dual left and right brackets) and 085538 and 085539 (universal and fascia brackets) detail the brackets.
| Document | Type | Revision | Date |
|---|---|---|---|
| 086112Roller 20 Specification Submittal | Specification Submittal | A | Jun 2026 |
| 0853144-Group RF Remote Control Specification Submittal | Specification Submittal | C | May 2016 |
| Roller Shades Revit Family: QS Shading Keypad 3-Group 3-Button with Raise/Lower | Revit Family | ||
| 085274Hard Wired Power Supply Specification Submittal | Specification Submittal | D | Aug 2014 |
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| 048863Roller Shades Application Note: Fabric Aesthetic Characteristics | Application Note | A | May 2026 |
| 0454114-Group RF Remote Control Installation Guide | Installation Guide | D | Jan 2015 |
| 045520Basic Wiring and Setup Installation Guide | Installation Guide | B | Nov 2016 |
| Revit Family: QS J-Box 35V Power Supply | Revit Family | ||
| Revit Family: QS Smart Power Panel, 30 Output | Revit Family |
Revisions of 085533
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085533, and what to read next
Lutron drawing 085533 gives the pocket, tube and roll-up figures only: no minimum shade sizes, bracket dimensions or fixings.
Publisher and citation for document 085533
Lutron Electronics Co., Inc. publishes document 085533, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085533 filled in.
