You searched and this document matched it.
See all results085262 · Specification Submittal · Rev G · English · PDF, 4 pages, 0.4 MB
Lutron Sivoia QS Wood Blinds Specification Submittal (085262)
Lutron's specification submittal for Sivoia QS wood blinds, wired, with independent lift and tilt from a headrail drive.
Lutron 085262 Rev G, Sivoia QS Wood Blinds Specification Submittal. https://assets.lutron.com/a/documents/085262.pdf, via https://newwaykl.com/resources/lutron/wood-blinds/sivoia-qs/lutron-sivoia-qs-wood-blinds-specification-submittal-085262/
About document 085262
Lutron document 085262, Rev g of 04/10/2025, is the wood blind chassis specification submittal: design features, Class 2 35 V power sources, controls, mounting depths, headrail drawings and the Sutton, Royal and Harvard valances.
What submittal 085262 covers
Lutron document 085262 has these seven sections. Each link opens the PDF at that page in a new tab.
- Aesthetics and design, opens in a new tab page 1
- Specifications: safety, power and compatible power sources, opens in a new tab page 2
- Environment and controls, opens in a new tab page 2
- Mounting options and clearance requirements, opens in a new tab page 3
- Headrail dimensions, opens in a new tab page 3
- Inside and outside mount valances, opens in a new tab page 4
- Slat and valance options, opens in a new tab page 4
Specifications in 085262
Lutron document 085262 prints 37 values in the groups the document uses, each with the document's unit. A row names the catalog codes it applies to. The page link beside each group opens the PDF where the group starts.
Aesthetics
PDF page 1 of 085262, opens in a new tab- Slat finishes
- A wide variety; paints and stains
- Valance styles
- Three, optional
- Headrail
- Aluminum, for applications without a valance
- Brackets and controls
- Low-profile mounting brackets and blind drive controls at the top of the headrail
- Lift
- Independent of tilt; adjusts height and gives access to the window
- Tilt
- Independent of lift, at any blind position
- Presets
- Height and tilt angle recalled together; several presets per blind or group of blinds
- Systems
- Sivoia QS and Sivoia QS Wireless
- Noise
- 44 dBA or less, measured 3 ft (1 m) from the drive unit
- Installation
- Inside mount and outside mount
- Light gap, end caps to slat ends
- 1/16 in (1.6 mm)
- Maximum size, basswood slats
- 108 in (2743 mm) wide x 120 in (3048 mm) high
- Safety standards
- Fully compliant with WCMA safety standards for corded window treatments
- Operating voltage
- Class 2, 35 V
Compatible Power Sources
PDF page 2 of 085262, opens in a new tab- Individual plug-in
- QSPS-P1-1-35V; QSPS-P2-1-35V; QSPS-P3-1-35VModels: QSPS-P1-1-35V, QSPS-P2-1-35V, QSPS-P3-1-35V
- 10-output power panels
- QSPS-10PNL; QSPSY-10PNLModels: QSPS-10PNL, QSPSY-10PNL
- Configurable power panels
- QSPS-10PNL-NPM and QSPS-30PNL-NPM, each with WIN-PS-5CC-R installedModels: QSPS-10PNL-NPM, QSPS-30PNL-NPM, WIN-PS-5CC-R
- Individual junction box
- QSPS-J-1-35VModels: QSPS-J-1-35V
Environment
PDF page 2 of 085262, opens in a new tab- Temperature
- 32 °F to 104 °F (0 °C to 40 °C)
- Humidity
- 0% to 90%, non-condensing
- Sivoia QS
- seeTouch QS keypads; Pico wireless control (through QSM); HomeWorks QS; HomeWorks systems with QSX processors
- Sivoia QS wireless (via Sivoia QS wireless receiver)
- Pico wireless control; 4-group RF shade remote control; RadioRA 2; RA2 Select; RadioRA 3; HomeWorks QS
Mounting Options
PDF page 3 of 085262, opens in a new tab- Bracket positions
- Inside mount; outside mount on trim; outside mount above trim
- Minimum jamb depth for full recess
- 2.75 in (70 mm)
Locking Bracket
PDF page 3 of 085262, opens in a new tab- Printed values
- 1.240 in (31.5 mm), 0.730 in (18.5 mm), 0.600 in (15 mm), 2.750 in (70 mm), 0.373 in (9.5 mm), 0.988 in (25 mm), 1.540 in (39 mm), 0.60 in (15 mm)
Headrail Dimensions
PDF page 3 of 085262, opens in a new tab- Printed values
- 3.450 in (88 mm), 2.250 in (57 mm)
System Profile
PDF page 3 of 085262, opens in a new tab- Printed values
- 2.650 in (67 mm), 3.750 in (95 mm), 2.250 in (57 mm)
Clearance Requirements
PDF page 3 of 085262, opens in a new tab- Clearance at the front (room side) of all brackets in a recess or pocket
- 1.375 in (35 mm)
- Minimum recess or pocket depth
- 4 in (102 mm)
Slat Options
PDF page 4 of 085262, opens in a new tab- Basswoods
- A variety of stains and painted colors; custom color matching finishes available
Valance Options
PDF page 4 of 085262, opens in a new tab- Styles
- Sutton, Royal and Harvard, for inside and outside mount
- Sutton profile, printed values
- 0.438 in (11 mm), 3.750 (95 mm), 0.270 in (7 mm)
- Royal profile, printed values
- 0.484 in (12 mm), 3.663 (93 mm), 0.488 in (12 mm)
- Harvard profile, printed values
- 0.438 in (11 mm), 3.750 (95 mm), 0.438 in (11 mm)
Inside Mount
PDF page 4 of 085262, opens in a new tab- Valance width
- System headrail width plus 0.25 in (6 mm), for mounting clearance
Outside Mount
PDF page 4 of 085262, opens in a new tab- Standard return depth
- 2.75 in (70 mm)
- Return depth range
- Any dimension from 1 in (25 mm) to 10 in (254 mm)
Facts Lutron states in 085262
The values Lutron document 085262 states, as published:
- Blind size
- Basswood slat blinds up to 108 in (2743 mm) wide by 120 in (3048 mm) high
- Headrail
- An aluminum headrail gives a plain look where no valance is used
- Slat finishes
- A range of paints and stains, with custom color matching through Lutron Customer Service
- Drive function
- Lift and tilt move independently, with height and tilt angle stored as presets, several per blind or group
- Noise
- Not above 44 dBA measured 3 ft (1 m) from the drive
- Light gap
- 1/16 in (1.6 mm) from the end caps to the slat ends
- Safety
- Fully compliant with WCMA safety standards for corded window treatments
- Systems
- Compatible with both Sivoia QS and Sivoia QS Wireless
- Power
- Class 2, 35 V
- Compatible power sources
- Plug-in: QSPS-P1-1-35V, QSPS-P2-1-35V, QSPS-P3-1-35V
- 10-output panels: QSPS-10PNL, QSPSY-10PNL
- Configurable panels: QSPS-10PNL-NPM, QSPS-30PNL-NPM, with WIN-PS-5CC-R fitted
- Junction box: QSPS-J-1-35V
- Environment
- 32 °F to 104 °F (0 °C to 40 °C), humidity 0% to 90% non-condensing
- Controls
- Sivoia QS: seeTouch QS keypads, Pico through a QSM
- Sivoia QS processors: HomeWorks QS, HomeWorks with QSX
- Sivoia QS Wireless, through its receiver: Pico, 4-group RF shade remote
- Sivoia QS Wireless systems: RadioRA 2, RA2 Select, RadioRA 3, HomeWorks QS
- Mounting depths
- Inside mount, outside mount on trim, or outside mount above trim
- Minimum jamb depth for a full recess: 2.75 in (70 mm)
- Brackets in a recess or pocket need 1.375 in (35 mm) room-side clearance
- Minimum pocket depth: 4 in (102 mm)
- Headrail and profile drawings
- Headrail Dimensions drawing: 3.450 in (88 mm) and 2.250 in (57 mm)
- System Profile drawing: 2.650 in (67 mm), 3.750 in (95 mm), 2.250 in (57 mm)
- Neither drawing labels which value is height, width or depth
- Valances
- Three styles, Sutton, Royal and Harvard, for inside and outside mount
- Inside mount valances: 0.25 in (6 mm) wider than the headrail width
- Outside mount returns: 2.75 in (70 mm) as standard
- Returns specifiable from 1 in (25 mm) to 10 in (254 mm)
Questions about document 085262
The answers come from Lutron document 085262 and New Way's record of it.
What is Lutron document 085262?
Lutron's four-page Sivoia QS wood blind specification submittal, printed 085262g with the date 04/10/2025 on every page.
Which revision of 085262 is current?
Rev G is the revision Lutron publishes. New Way checked it against assets.lutron.com on 15 October 2026.
Which wood blinds does 085262 cover?
Lutron Sivoia QS wood blinds.
How large can a Sivoia QS wood blind be?
Lutron document 085262 offers basswood slat blinds up to 108 in (2743 mm) wide by 120 in (3048 mm) high.
What power does the blind need?
Lutron document 085262 specifies Class 2 power at 35 V from a Lutron QSPS source.
- Plug-in supplies, or the 10-output QSPS-10PNL or QSPSY-10PNL panels
- Configurable panels with WIN-PS-5CC-R installed
- The QSPS-J-1-35V junction box
How deep must the recess or pocket be?
Lutron document 085262 gives a minimum jamb depth of 2.75 in (70 mm) for a full recess. In a recess or pocket the brackets need 1.375 in (35 mm) of room-side clearance, which makes 4 in (102 mm) the minimum pocket depth.
Which control systems run this blind?
Lutron document 085262 lists Sivoia QS wired controls and Sivoia QS Wireless controls through its receiver.
- Sivoia QS keypads: seeTouch QS, or Pico through a QSM
- Sivoia QS processors: HomeWorks QS, HomeWorks with QSX
- Sivoia QS Wireless: Pico, 4-group RF remote, RadioRA 2, RA2 Select, RadioRA 3, HomeWorks QS
Which mounting positions does the submittal allow?
Lutron document 085262 allows brackets inside mounted, outside mounted on the trim, or outside mounted above the trim. A full recess needs a jamb at least 2.75 in (70 mm) deep.
Other Sivoia QS specification submittals
Specification submittals for the same Sivoia QS system:
| Document | Drive class | Revision | Date |
|---|---|---|---|
| 085665Serena and Wood Blinds Specification Submittal | F | Aug 2025 | |
| 08533510-Output Smart Panel Specification Submittal | Commercial Contract Manual, Roller 20 to 300 | D | Apr 2020 |
| 08559230-Output Configurable Power Panel Enclosure (Power Modules sold separately), 35V Output Specification Submittal | Roller 20 to 300 | B | Nov 2018 |
| 08554435V J-Box Power Supply Specification Submittal | Commercial Contract Manual, Roller 20 to 300 | C | Oct 2017 |
Documents used with 085262
Lutron document 045480 is the installation guide for this blind, 045477 the valance guide, 085665 the Serena and Triathlon submittal. Lutron documents 085329, 085335, 085544 and 085592 are the power supply and panel specification submittals.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045480Wood Blinds Installation Guide: Venetians | Installation Guide | A | May 2015 |
| 045477Wood Blinds Installation Guide: Valance | Installation Guide | A | May 2015 |
| CAD Drawing: Shade Equipment CAD Block | CAD Drawing | ||
| 048846Application Note: EU EcoDesign Standby Power Information | Application Note | A | Nov 2024 |
| Performance Specification: Section 122113, Venetian Blinds | Performance Specification | ||
| 0454114-Group RF Remote Control Installation Guide | Installation Guide | D | Jan 2015 |
| 045520Basic Wiring and Setup Installation Guide | Installation Guide | B | Nov 2016 |
| 045000710 Output Power Panel Power Supply (12 V) Installation Guide | Installation Guide | A | Jul 2025 |
| 048562Application Note: Alkaline Battery Screening and Diagnosis | Application Note | A | Jul 2015 |
| 3671319Product Brochure: Residential Shading Solutions | Product Brochure | K | Feb 2023 |
Revisions of 085262
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| G | Not stated | Current. The file on assets.lutron.com. Checked 15 Oct 2026. |
Not covered in 085262, and what to read next
Lutron document 085262 gives no installation, wiring or limit-setting steps and no power supply ratings.
Publisher and citation for document 085262
Lutron Electronics Co., Inc. publishes document 085262, Rev G, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 15 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085262 filled in.
