You searched and this document matched it.
See all resultsCAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Sivoia QS Drapery CAD Drawing: Standard 20″ Radius Curved
Lutron's plan drawing of the standard 90° curved drapery track with a 20.00 in (508 mm) radius.
Lutron, Sivoia QS Drapery CAD Drawing: Standard 20 in. Radius Curved. https://assets.lutron.com/a/documents/0207-drps-cdr-c.pdf, via https://newwaykl.com/resources/lutron/drapery/sivoia-qs/lutron-sivoia-qs-drapery-cad-drawing-standard-20-radius-curved/
About this Sivoia QS drawing
Lutron's curved track drawing is the one-sheet drapery detail drawing at 1/8 scale, revision A, filed under Sivoia QS drapery: typical plan with viewpoints, minimum leg widths, one unlabeled dimension and the track finishes.
What this Sivoia QS drawing covers
This Sivoia QS drawing has these six sections, all on its one page.
- Typical plan of the curved track, view 1
- Curve radius
- Minimum idler leg and drive leg widths
- Inside and outside viewpoints
- Track finish options
- Title block: drapery detail drawing, scale, revision
Specifications in this Sivoia QS drawing
This Sivoia QS drawing prints eleven values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
View 1, typical plan (scale 1/8)
PDF page 1 of this Sivoia QS drawing, opens in a new tab- Radius
- 20.00 in (508 mm)
- Minimum idler leg width
- 23.125 in (587 mm)
- Minimum drive leg width
- 22.875 in (581 mm)
- Unlabeled
- 1.25 in (32 mm)
- Viewpoints
- Inside, outside
- Track finishes
- White, bronze, clear anodized
- Sheet title
- Standard 90° curved drapery track, 20 in radius
- Drawing type
- Drapery detail drawing
- Scale
- 1/8
- Revision
- A
- Copyright
- 2009
Facts Lutron states in this Sivoia QS drawing
The values this Sivoia QS drawing states, as published:
- Sheet title
- Standard 90° curved drapery track, 20 in radius, drapery detail drawing
- Curve radius
- 20.00 in (508 mm)
- Minimum idler leg width
- 23.125 in (587 mm)
- Minimum drive leg width
- 22.875 in (581 mm)
- Further plan dimension
- 1.25 in (32 mm), unlabeled
- Viewpoints
- Inside and outside, both marked on the typical plan
- Track finishes
- White, bronze and clear anodized
- Scale, view and revision
- Typical plan, view 1, scale 1/8, revision A
- Date
- Copyright 2009 on the sheet, no issue date
- File formats
- PDF (one page), DWG and DXF, file name 0207-drps-cdr-c
Questions about this Sivoia QS drawing
The answers come from this Sivoia QS drawing and New Way's record of it.
What is Lutron's curved track drawing?
Lutron's curved track sheet is published as PDF, DWG and DXF files under the file name 0207-drps-cdr-c. The sheet carries a 2009 copyright line and revision A, and prints no issue date.
Which revision of this Sivoia QS drawing is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which drapery tracks does this Sivoia QS drawing cover?
Lutron Sivoia QS drapery tracks.
What radius does Lutron's standard curved drapery track have?
Lutron's curved track drawing gives a radius of 20.00 in (508 mm) for the standard curved drapery track.
Which finishes is the curved track offered in?
Lutron's curved track drawing states the track is available in white, bronze and clear anodized.
How short can the drive leg and the idler leg be?
Lutron's curved track drawing sets the minimum idler leg width at 23.125 in (587 mm). The minimum drive leg width is 22.875 in (581 mm).
What does the 1.25 in (32 mm) dimension measure?
Lutron's curved track drawing prints 1.25 in (32 mm) on the typical plan without a label. The sheet does not say what it measures.
How does the drawing mark the two sides of the curve?
Lutron's curved track drawing marks one viewpoint as inside and one as outside on the typical plan. The drive leg and the idler leg are labeled at either end of the curve.
Other Sivoia QS CAD drawings
CAD drawings for the same Sivoia QS system:
All 33 Sivoia QS CAD drawingsDocuments used with this Sivoia QS drawing
Lutron's curved track drawing sits beside the curved, standard 90 degree plan view and the two standard curved Revit families. Lutron documents 3684025 and 045982 are the curved template guide for drapery track and the Sivoia QS drapery installation guide.
| Document | Type | Revision | Date |
|---|---|---|---|
| 045982Drapery Installation Guide | Installation Guide | A | Sep 2024 |
| 086117Drapery Specification Submittal: D105 System, Capacity | Specification Submittal | D | May 2026 |
| 086118Drapery Specification Submittal: D145 System, Capacity | Specification Submittal | B | May 2017 |
| 045985Installation Guide: Wireless Drapery Lite System | Installation Guide | A | Nov 2024 |
| 045983Recessed System for Drapery Installation Guide | Installation Guide | A | Sep 2024 |
| Drapery Revit Family: Ceiling Mount | Revit Family | ||
| Drapery Revit Family: Dual (Ceiling Mount) | Revit Family | ||
| Drapery Revit Family: Dual (Wall Mount) | Revit Family | ||
| Drapery Revit Family: Standard Curved (Ceiling Mount) | Revit Family | ||
| Drapery Revit Family: Standard Curved (Wall Mount) | Revit Family |
Revisions of this Sivoia QS drawing
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in this Sivoia QS drawing, and what to read next
Lutron's curved track drawing gives the plan at the 20.00 in (508 mm) radius only, without brackets, spacing, mounting, elevation or drive.
Publisher and citation for this Sivoia QS drawing
Lutron Electronics Co., Inc. publishes this document and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Sivoia QS are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Sivoia QS?
New Way supplies and installs Lutron Sivoia QS shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
