You searched and this document matched it.
See all results085382 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Commercial Contract Manual CAD Drawing: Contract Roller Shade 5″ x 5 1/8″ Pocket, All Views (085382)
Lutron's CAD detail drawing of the Contract Roller pocket, titled 5 x 5 1/8 in, in four views.
Lutron 085382 Rev A, Commercial Contract Manual CAD Drawing: Contract Roller Shade 5 in. x 5 1/8 in. Pocket, All Views. https://assets.lutron.com/a/documents/085382.pdf, via https://newwaykl.com/resources/lutron/roller-shades/manual/lutron-commercial-commercial-contract-manual-cad-drawing-085382/
About document 085382
Lutron document 085382, revision A, is a one-page CAD detail drawing at scale 1/2 with section, elevation, plan and assembled isometric views, the pocket depth and height, maximum length, flap sizes and finishes.
What drawing 085382 covers
Lutron document 085382 has these seven sections, all on its one page.
- Section view, depth, height and dimension A
- Elevation view, maximum length
- Plan view
- Assembled isometric view
- Note 1, finishes
- Note 2, flap sizes, manual and motorized
- Title block, drawing 085382, revision A
Specifications in 085382
Lutron document 085382 prints eleven values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
Section view
PDF page 1 of 085382, opens in a new tab- Depth
- 5 in (127 mm)
- Height
- 5.13 in (130 mm)
- Dimension with no label on the sheet
- 0.94 in (24 mm)
Elevation view
PDF page 1 of 085382, opens in a new tab- Max length
- 180 in (4572 mm)
- Finishes
- White, black, bronze and silver
- Dimension A, Contract Roller manual shades
- 2 inch flap
- Dimension A, Contract Roller motorized shades
- 3 inch flap
- Flap drawn
- 2 inch
Title block
PDF page 1 of 085382, opens in a new tab- Title
- Contract Roller Pocket 5 x 5 1/8 in
- Scale
- 1/2
- Revision
- A
Facts Lutron states in 085382
The values Lutron document 085382 states, as published:
- What the drawing shows
- The Contract Roller recessed pocket at scale 1/2 in section, elevation, plan and assembled isometric views
- Pocket size
- 5 in (127 mm) deep and 5.13 in (130 mm) high
- Maximum length
- 180 in (4572 mm), marked on the elevation view
- Finishes
- White, black, bronze and silver
- Flap (dimension A)
- 2 in for Contract Roller manual shades, 3 in for Contract Roller motorized shades, the 2 in flap drawn
- Other dimension
- 0.94 in (24 mm), printed on the section view with no label
- Title block
- Scale 1/2, drawing 085382, revision A, titled Contract Roller Pocket 5 x 5 1/8 in, no date on the sheet
- File formats
- PDF (about 134 KB), DWG and DXF
Questions about document 085382
The answers come from Lutron document 085382 and New Way's record of it.
What is Lutron document 085382?
Lutron's one-page CAD detail drawing of the empty Contract Roller pocket, published as PDF (about 134 KB), DWG and DXF.
Which revision of 085382 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085382 cover?
Lutron Manual roller shades in the Commercial Contract Manual drive class.
What size is the Contract Roller pocket on drawing 085382?
Lutron drawing 085382 dimensions the pocket at 5 in (127 mm) deep and 5.13 in (130 mm) high. The title block names it 5 x 5 1/8 in.
Which CAD formats does Lutron publish drawing 085382 in?
Lutron publishes drawing 085382 as a PDF with matching DWG and DXF files. The pocket section can go straight into a ceiling detail or a submittal.
How long can one pocket length be?
Lutron drawing 085382 marks a maximum length of 180 in (4572 mm) on the elevation view.
Which flap goes with a motorized shade?
Lutron's note on drawing 085382 gives a 3 in flap for Contract Roller motorized shades. Contract Roller manual shades take a 2 in flap, and the sheet draws the 2 in flap.
What finishes does the pocket come in?
Lutron lists white, black, bronze and silver for the pocket on drawing 085382. The sheet names no other finish.
Other Manual Commercial Contract Manual CAD drawings
CAD drawings for the same Manual Commercial Contract Manual drive class:
All 20 Manual roller shade CAD drawingsDocuments used with 085382
Lutron drawing 085382 serves both drive types, so its notes give a manual flap and a motorized flap. Lutron drawings 085375, 085376, 085380 and 085819 are the dual-shade and dual-pocket sections, and 085381 the all-views fascia drawing.
Revisions of 085382
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085382, and what to read next
Lutron drawing 085382 shows the empty pocket only, with no shade, no fixings and no installation steps.
Publisher and citation for document 085382
Lutron Electronics Co., Inc. publishes document 085382, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron is a trademark of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Manual roller shades?
New Way supplies and installs Lutron Manual roller shades in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085382 filled in.
