You searched and this document matched it.
See all results085635 · CAD Drawing · Rev B · English · PDF, DWG, DXF
Lutron Commercial Contract Manual CAD Drawing: Contract Roller Manual, Dual Shade, Both Clutches Right with Fascia and Back Cover, Ceiling Mount, Section View (085635)
Lutron's section drawing of the dual fascia and back cover bracket for a Contract Roller Manual dual shade, ceiling mounted.
Lutron 085635 Rev B, Commercial Contract Manual CAD Drawing: Contract Roller Manual, Dual Shade, Both Clutches Right with Fascia and Back Cover, Ceiling Mount, Section View. https://assets.lutron.com/a/documents/085635.pdf, via https://newwaykl.com/resources/lutron/roller-shades/manual/lutron-commercial-commercial-contract-manual-cad-drawing-085635/
About document 085635
Lutron document 085635, Rev B at scale 1/3, is the manual dual shade fascia and back cover section: bracket height and depth, fascia depth, tube and roll-up diameters, tube centers, back cover deduction, mounting notes.
What drawing 085635 covers
Lutron document 085635 has these nine sections, all on its one page.
- Section view, ceiling mount shown
- Bracket height and depth, fascia depth
- Tube diameter, optional tubes and maximum roll-up
- Tube center dimensions
- Back cover deduction note
- Chain tensioner note
- Legend (top view) and mounting note
- Clearance and adjustment note
- Title block: code, number, scale, view, revision
Specifications in 085635
Lutron document 085635 prints 28 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
View 1, section
PDF page 1 of 085635, opens in a new tab- Bracket height with fascia
- 8.06 in (204 mm)
- Bracket depth with fascia (starred)
- 6.13 in (156 mm)
- Fascia depth
- 1.06 in (27 mm)
- Tube diameter
- Ø1.75 in (44 mm)
- Optional tube diameters
- Ø2.56 in (65 mm) or Ø2.00 in (51 mm)
- Maximum roll-up, first shade
- Ø3.35 in (85 mm)
- Maximum roll-up, second shade
- Ø3.35 in (85 mm)
- Tube center
- 2.25 in (57 mm)
- Tube center
- 5.81 in (148 mm)
- Tube center (starred)
- 3.94 in (99 mm)
- Tube center (starred)
- 2.31 in (59 mm)
- Unlabeled dimension (starred)
- 2.25 in (57 mm)
- Unlabeled dimension (starred)
- 0.63 in (17 mm)
- Hembar
- Varies (two hembars drawn)
- Fixing shown
- Ceiling fasteners
- Parts labeled
- Bracket, back cover, dual fascia
- Without back cover
- Deduct 0.11 in from the starred dimensions
- Bracket mounting
- Ceiling or wall (ceiling mount shown)
- Chain tensioner
- Wall or floor mounted
- Clearances
- Set at the factory; kept by the installer when adjustment features are used
- Adjustments at maximum roll diameter
- Not all available
Title block
PDF page 1 of 085635, opens in a new tab- Product
- Contract Roller Manual
- Sheet title
- Dual fascia and back cover bracket
- Code
- CHR-C
- Number as printed
- 085635
- Scale
- 1/3
- View
- 1
- Revision
- B
Facts Lutron states in 085635
The values Lutron document 085635 states, as published:
- What the drawing shows
- A section through a Contract Roller Manual dual shade with dual fascia and back cover, bracket fixed with ceiling fasteners
- Bracket height with fascia
- 8.06 in (204 mm)
- Bracket depth with fascia
- 6.13 in (156 mm), a starred dimension
- Fascia depth
- 1.06 in (27 mm)
- Tube diameter
- Ø1.75 in (44 mm), optional Ø2.56 in (65 mm) or Ø2.00 in (51 mm)
- Maximum roll-up
- Ø3.35 in (85 mm) on each of the two shades
- Tube center dimensions
- 2.25 in (57 mm)
- 5.81 in (148 mm)
- 3.94 in (99 mm), starred
- 2.31 in (59 mm), starred
- Without back cover
- Deduct 0.11 in from every starred dimension, with no metric figure given for the deduction
- Mounting
- Ceiling or wall mounting of the bracket, with the ceiling mount shown
- Chain tensioner
- Wall or floor mounted
- Clearances
- Factory-supplied shades have the clearances they need
- The installer keeps them once adjustment features are used
- Not every adjustment is available at maximum roll diameter
- Title block
- Contract Roller Manual, dual fascia and back cover bracket, CHR-C, 085635, scale 1/3, view 1, revision B
Questions about document 085635
The answers come from Lutron document 085635 and New Way's record of it.
What is Lutron document 085635?
Lutron's one-page section drawing, view 1 under code CHR-C, with no clutch side stated on the sheet.
Which revision of 085635 is current?
Rev B is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085635 cover?
Lutron Manual roller shades in the Commercial Contract Manual drive class.
How much height does the Contract Roller dual bracket with fascia need?
Lutron document 085635 gives a bracket height with fascia of 8.06 in (204 mm). Lutron draws the bracket fixed to the ceiling with ceiling fasteners.
What changes if the back cover is left out?
Lutron document 085635 says to deduct 0.11 in from each starred dimension when the back cover is not installed. Lutron stars the 6.13 in (156 mm) bracket depth with fascia, two tube center dimensions and two dimensions that carry no label.
Can the dual bracket be wall mounted instead?
Yes, Lutron's note on drawing 085635 allows ceiling or wall mounting of the bracket, with the ceiling mount drawn. The chain tensioner can go on the wall or the floor.
What must the installer watch when using the bracket adjustments?
Lutron document 085635 states that a shade installed as supplied from the factory has the clearances it needs. Lutron makes the installer responsible for those clearances once adjustment features are used.
Some adjustments are not available at maximum roll diameter.
How deep is the head with the fascia fitted?
Lutron document 085635 dimensions the bracket depth with fascia at 6.13 in (156 mm) and the fascia depth at 1.06 in (27 mm). Lutron's back cover deduction of 0.11 in applies to the 6.13 in figure.
Other Manual Commercial Contract Manual CAD drawings
CAD drawings for the same Manual Commercial Contract Manual drive class:
All 20 Manual roller shade CAD drawingsDocuments used with 085635
Lutron documents 085375 (both clutches right) and 085376 (clutches left and right) draw the manual dual shade in a pocket. Lutron document 085636 is the motorized dual shade section with fascia and back cover.
Revisions of 085635
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| B | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085635, and what to read next
Lutron drawing 085635 gives one section view: shade widths, fabric, bracket spacing and fastener sizes are not on the sheet.
Publisher and citation for document 085635
Lutron Electronics Co., Inc. publishes document 085635, Rev B, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron is a trademark of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Manual roller shades?
New Way supplies and installs Lutron Manual roller shades in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085635 filled in.
