You searched and this document matched it.
See all results085733 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Palladiom Wire-Free Roller Shades CAD Drawing: Dual Wall Mount Section View (085733)
Lutron's section view of two Palladiom Wire-Free shades wall mounted one above the other on a single window.
Lutron 085733 Rev A, Palladiom Wire-Free Roller Shades CAD Drawing: Dual Wall Mount Section View. https://assets.lutron.com/a/documents/085733.pdf, via https://newwaykl.com/resources/lutron/roller-shades/palladiom-wire-free/lutron-palladiom-wire-free-roller-shades-cad-drawing-085733/
About document 085733
Lutron drawing 085733, Rev A, is the dual wall mount shade section view at 1/2 scale: tube centers, tube and roll-up diameters, clearances, hembars, a spacer by others and a battery access note.
What drawing 085733 covers
Lutron document 085733 has these nine sections, all on its one page.
- Section view: two stacked wall mounted shades
- Spacer by others, tied to the building structure
- Tube center dimensions
- Tube diameter and maximum roll-up for both shades
- Minimum recommended clearances
- Hembar positions
- Battery access note for the lower shade
- Legend keyed to the top view
- Clearance note for the master technician
Specifications in 085733
Lutron document 085733 prints 21 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
View 1, section view
PDF page 1 of 085733, opens in a new tab- Tube center
- 3.50 in (89 mm)
- Tube center
- 3.50 in (89 mm)
- Tube center
- 2.13 in (54 mm)
- Unlabeled dimension
- 1.375 in (35 mm)
- Tube diameter, each shade
- Ø2.25 in (Ø57 mm)
- Maximum roll-up, each shade
- Ø3.25 in (Ø83 mm)
- Minimum recommended clearance
- 0.50 in (13 mm)
- Minimum recommended clearance
- 0.50 in (13 mm)
- Spacer
- By others
- Hembar (2X)
- Varies
- Glazing
- Typical
- Spacer fixing
- Must be tied to the building structure
- Battery access
- The top shade may obstruct the bottom shade; take care at the batteries not to damage the bottom shade
- Clearance note
- A shade installed as the factory supplies it has the clearances it needs to operate; the master technician keeps them after installation
Title block
PDF page 1 of 085733, opens in a new tab- Sheet header
- Palladiom Wire-Free shade, dual wall mount shade
- Drawing number
- 085733
- Sheet type
- Section view
- Scale
- 1/2
- View
- 1
- Revision
- A
- Legend
- Top view, markers 1 and 2
Facts Lutron states in 085733
The values Lutron document 085733 states, as published:
- Drawing
- 085733, one page, section view, headed dual wall mount shade
- Scale, view and revision
- 1/2 scale, view 1, revision A, no date printed
- Tube centers
- 3.50 in (89 mm) printed twice and 2.13 in (54 mm) once
- Unlabeled dimension
- 1.375 in (35 mm), printed with no label
- Tube diameter
- Ø2.25 in (Ø57 mm), printed for each shade
- Maximum roll-up
- Ø3.25 in (Ø83 mm), printed for each shade
- Spacer
- Marked by others on the section
- Spacer fixing
- Lutron notes the spacer must be tied to the building structure
- Minimum recommended clearance
- 0.50 in (13 mm), printed at two positions
- Hembars
- Two hembars, both marked varies
- Battery access
- Lutron notes the top shade may obstruct the bottom shade. Lutron asks for care at the batteries so the bottom shade is not damaged.
- Clearances after installation
- Lutron makes the master technician responsible for keeping the factory clearances after installation
- File formats
- PDF, DWG and DXF
Questions about document 085733
The answers come from Lutron document 085733 and New Way's record of it.
What is Lutron document 085733?
Lutron's section view of two Palladiom Wire-Free shades wall mounted one above the other on a single window. Lutron drawing 085733, Rev A, is the dual wall mount shade section view at 1/2 scale: tube centers, tube and roll-up diameters, clearances, hembars, a spacer by others and a battery access note.
Which revision of 085733 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085733 cover?
Lutron Palladiom Wire-Free roller shades.
What does Lutron drawing 085733 show?
Lutron drawing 085733 is a one-page sheet marked view 1 and revision A, with no date printed. Lutron prints the tube centers, roll sizes and clearances, with notes on the spacer and on battery access.
Who supplies the spacer?
Lutron marks the spacer as by others on drawing 085733. Lutron requires the spacer to be tied to the building structure and prints no labeled spacer size or material.
Can the batteries of the bottom shade be reached?
Lutron notes on drawing 085733 that the shade on the bottom may be obstructed by the shade on top. Lutron asks for care when reaching the batteries so the bottom shade is not damaged.
What clearance does the section recommend?
Lutron drawing 085733 prints a minimum recommended clearance of 0.50 in (13 mm) at two positions on the section. Lutron's note leaves the master technician to keep the factory clearances after installation.
Where are the tube centers?
Lutron prints three tube center values on drawing 085733. Which shade and surface each runs to shows only on the drawing.
- 3.50 in (89 mm), printed twice
- 2.13 in (54 mm), printed once
- 1.375 in (35 mm), a value with no label
Other Palladiom Wire-Free CAD drawings
CAD drawings for the same Palladiom Wire-Free system:
All 31 Palladiom Wire-Free CAD drawingsDocuments used with 085733
Lutron drawings 085734, 085735 and 085732 are the other dual-shade section views; 085710 and 085726 the single wall mount sections. Lutron drawings 085719 and 085718 are the wall mount end bracket details, and 085708 is the specification submittal.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085708Roller Shades Specification Submittal | Specification Submittal | K | Jun 2025 |
| 045908Roller Shades Installation Guide: Electronic Drive Unit (EDU) Replacement | Installation Guide | A | Jul 2022 |
| 045913Roller Shades Installation Guide: Setup | Installation Guide | C | Sep 2023 |
| 048868Roller Shades Application Note: Shade Drive Sealed Battery Removal and Replacement | Application Note | A | Jul 2026 |
| 048802Roller Shades Application Note: Shading System, Door Applications | Application Note | A | Oct 2021 |
| 3686194Roller Shades Product Brochure | Product Brochure | C | Mar 2025 |
| 3671319Sivoia QS Product Brochure: Residential Shading Solutions | Product Brochure | K | Feb 2023 |
Revisions of 085733
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085733, and what to read next
Lutron drawing 085733 prints no labeled spacer size or material, no fixing schedule and no battery steps.
Publisher and citation for document 085733
Lutron Electronics Co., Inc. publishes document 085733, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Palladiom are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Palladiom Wire-Free?
New Way supplies and installs Lutron Palladiom Wire-Free shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085733 filled in.
