You searched and this document matched it.
See all results085735 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Palladiom Wire-Free Roller Shades CAD Drawing: Dual Jamb & Wall Mount Section View (085735)
Lutron's 1/2 scale section of two Palladiom Wire-Free shades, one in the jamb and one on the wall in front.
Lutron 085735 Rev A, Palladiom Wire-Free Roller Shades CAD Drawing: Dual Jamb & Wall Mount Section View. https://assets.lutron.com/a/documents/085735.pdf, via https://newwaykl.com/resources/lutron/roller-shades/palladiom-wire-free/lutron-palladiom-wire-free-roller-shades-cad-drawing-085735/
About document 085735
Lutron drawing 085735, revision A, is the dual jamb and wall mount section view 1: minimum recommended jamb depth, tube center dimensions, tube and maximum roll-up, trim, minimum clearances and the battery access note.
What drawing 085735 covers
Lutron document 085735 has these nine sections, all on its one page.
- Section view, jamb and wall mounted shades
- Minimum recommended jamb depth
- Tube center dimensions
- Tube diameter and maximum roll-up for both shades
- Minimum clearances and trim
- Hembar positions
- Battery access note for the jamb mounted shade
- Legend keyed to the top view
- Clearance note for the master technician
Specifications in 085735
Lutron document 085735 prints 22 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
View 1, section view
PDF page 1 of 085735, opens in a new tab- Minimum recommended jamb depth
- 4.15 in (105 mm)
- Tube center
- 2.50 in (64 mm)
- Tube center
- 2.53 in (64 mm)
- Tube center
- 3.25 in (83 mm)
- Tube diameter (2X)
- Ø2.25 in (Ø57 mm)
- Maximum roll-up (2X)
- Ø3.25 in (Ø83 mm)
- Trim
- 0.38 in (10 mm)
- Minimum clearance required
- 0.50 in (13 mm)
- Minimum recommended clearance
- 0.50 in (13 mm)
- Minimum recommended clearance
- 0.50 in (13 mm)
- Minimum recommended clearance (2X), with a value in brackets
- 0.50 in (13 mm); 0.88 in (23 mm) in brackets
- Hembar (2X)
- Varies
- Glazing
- Typical
- Battery access
- The wall mounted shade may obstruct the jamb mounted shade; take care at the batteries not to damage the wall shade
- Clearance note
- A shade installed as the factory supplies it has the clearances it needs to operate; the master technician keeps them after installation
Title block
PDF page 1 of 085735, opens in a new tab- Sheet header
- Palladiom Wire-Free shade, dual jamb and wall mount shade
- Drawing number
- 085735
- Sheet type
- Section view
- Scale
- 1/2
- View
- 1
- Revision
- A
- Legend
- Top view, markers 1 and 2
Facts Lutron states in 085735
The values Lutron document 085735 states, as published:
- Drawing
- 085735, one page, section view, with the sheet header reading dual jamb and wall mount shade
- Scale, view and revision
- 1/2 scale, view 1, revision A, no date printed
- Minimum recommended jamb depth
- 4.15 in (105 mm)
- Tube diameter
- Ø2.25 in (Ø57 mm), marked 2X for the two shades
- Maximum roll-up
- Ø3.25 in (Ø83 mm), marked 2X for the two shades
- Tube centers
- 2.50 in (64 mm)
- 2.53 in (64 mm)
- 3.25 in (83 mm)
- Minimum recommended clearance
- 0.50 in (13 mm) at three positions, one marked 2X with 0.88 in (23 mm) in brackets
- Minimum clearance required
- 0.50 in (13 mm)
- Trim
- 0.38 in (10 mm)
- Hembars
- Two hembars, both marked varies
- Battery access
- Lutron notes the wall mounted shade may obstruct the jamb mounted shade
- Battery access care
- Lutron asks for care when reaching the batteries so the wall shade is not damaged
- Clearances after installation
- Lutron makes the master technician responsible for keeping the factory clearances after installation
- File formats
- PDF, DWG and DXF
Questions about document 085735
The answers come from Lutron document 085735 and New Way's record of it.
What is Lutron drawing 085735?
Lutron's one-page section at 1/2 scale, numbered view 1, with no date printed and published as PDF, DWG and DXF.
Which revision of 085735 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085735 cover?
Lutron Palladiom Wire-Free roller shades.
How deep should the jamb be?
At least 4.15 in (105 mm), the minimum recommended jamb depth Lutron prints on drawing 085735 for the jamb mounted shade.
Can the jamb shade's batteries be reached behind the wall shade?
Lutron notes on drawing 085735 that the jamb mounted shade may be obstructed by the wall mounted shade. Lutron asks for care when reaching the batteries so the wall mounted shade is not damaged.
What clearances and trim does the section allow?
Lutron drawing 085735 prints 0.50 in (13 mm) as the minimum clearance required at one position.
- Minimum recommended clearance: 0.50 in (13 mm) at three positions
- One of the three is marked 2X, with 0.88 in (23 mm) in brackets
- Trim: 0.38 in (10 mm)
Where are the tube centers?
Lutron drawing 085735 prints three tube center dimensions; which shade and surface each runs to is visible on the drawing.
- 2.50 in (64 mm)
- 2.53 in (64 mm)
- 3.25 in (83 mm)
How large is each roll?
Lutron drawing 085735 gives both shades a Ø2.25 in (Ø57 mm) tube and a Ø3.25 in (Ø83 mm) maximum roll-up. Both hembars are marked as varying.
Other Palladiom Wire-Free CAD drawings
CAD drawings for the same Palladiom Wire-Free system:
All 31 Palladiom Wire-Free CAD drawingsDocuments used with 085735
Lutron drawings 085734, 085732 and 085733 are the dual ceiling, dual jamb and dual wall mount section views. Lutron drawing 085716 is the jamb mount section, 085710 the wall mount section, and 085708 the specification submittal.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085708Roller Shades Specification Submittal | Specification Submittal | K | Jun 2025 |
| 045908Roller Shades Installation Guide: Electronic Drive Unit (EDU) Replacement | Installation Guide | A | Jul 2022 |
| 045913Roller Shades Installation Guide: Setup | Installation Guide | C | Sep 2023 |
| 048868Roller Shades Application Note: Shade Drive Sealed Battery Removal and Replacement | Application Note | A | Jul 2026 |
| 048802Roller Shades Application Note: Shading System, Door Applications | Application Note | A | Oct 2021 |
| 3686194Roller Shades Product Brochure | Product Brochure | C | Mar 2025 |
| 3671319Sivoia QS Product Brochure: Residential Shading Solutions | Product Brochure | K | Feb 2023 |
Revisions of 085735
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085735, and what to read next
Lutron drawing 085735 prints no bracket sizes, fixings, shade size limits or battery steps.
Publisher and citation for document 085735
Lutron Electronics Co., Inc. publishes document 085735, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Palladiom are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Palladiom Wire-Free?
New Way supplies and installs Lutron Palladiom Wire-Free shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085735 filled in.
