Lutron Palladiom Wire-Free Roller Shades Specification Submittal (085708, rev K)

Facts Lutron states in 085708

The values Lutron document 085708 states, as published:

Single shade size range

• Width 21 in (53.34 cm) at the smallest up to 12 ft (3.66 m)
• Height 12 in (30.48 cm) at the smallest up to 12 ft (3.66 m)

Wireless control

• ClearConnect Type A RF with a 30 ft (9 m) range
• Compatible: Pico, the 4-Group RF shade remote, Caséta (Smart Hub PRO)
• Also RA2 Select, RadioRA 3, HomeWorks QS and HomeWorks QSX

Voltage, speed, sound and alignment

• Operating voltage 4.5 to 9.0 V DC
• Bottom bar speed 3.6 in/sec (91.4 mm/sec)
• 35 dBA measured 3 ft (0.91 m) from the EDU
• Shades in a group hold alignment within 0.125 in (3 mm)

Environment and approvals

• 32 °F to 104 °F (0 °C to 40 °C), indoor use only
• Relative humidity below 90% non-condensing
• cULus listed (E135084), FCC, IC, NOM, CE and UKCA

Light gaps and deductions

• Symmetrical light gaps as small as 0.75 in (19 mm)
• Tall, narrow shades: fabric deduction up to 0.25 in (6 mm) per side
• That deduction gives a 1 in (25 mm) gap
• No bracket-to-bracket width deductions for outside or inside mounts
• The idler gives 0.375 in (10 mm) of compliance

Fabric drop and bottom bars

• Regular roll: fabric drops on the window side
• Reverse roll: room side, recommended for dual-sided fabric
• Bars: Palladiom bottom rail, half-wrap Architectural, metal or plastic endcaps
• Designer bar, five options in all
• Sealed: 3/16 in by 1 in (5 mm by 25 mm) or 7/16 in by 1-3/8 in (11 mm by 35 mm)
• The bar may be ordered in a different finish from the brackets

Batteries by shade width

• Three 1.5 V D-cells: 21 in to 23 3/16 in (53.34 cm to 58.90 cm)
• Four: 23 1/4 in to 29 5/8 in (59.05 cm to 75.25 cm)
• Six: 29 11/16 in to 144 in (75.41 cm to 365.8 cm)
• Sleeve lengths: 7.5 in (190.5 mm) for 3 cells, 10.0 in (254 mm) for 4
• 15.0 in (381 mm) for 6 cells
• Batteries not included

Battery access clearance

• Bracket depth 0.625 in (16 mm) max from the front: wall, jamb, ceiling mounts
• Ceiling-mount depth also limited by the fabric roll-up size
• Depth drawings also print 3.75 in (95 mm) and 2.50 in (63.5 mm), unlabeled
• Sleeve clearance 3 in (76 mm) or more: clipped for one-by-one loading
• With less, the shade comes off the brackets

Pocket, room-side and corner clearance

• Not recommended for a pocket or recess
• Fitting and removal: 6 in (150 mm) min clear on the brackets' room side
• On a door, that clearance is above the shade
• Butt-and-pass corners put the idler brackets in the corner
• 1/4 in (6 mm) between the pass shade roll and the butt shade bracket

Door and dual mounting

• Door shades use the ceiling / door operator bracket
• Its slide ring moves vertically so door movement cannot extend it
• Dual mounting is limited by the same clearances
• Some pairings: one or both shades come out to change batteries

Bracket footprint and projection

• Projection, slide ring out: 5.50 in (141 mm), wall and jamb operator brackets
• 4.375 in (111 mm) on the ceiling or door operator brackets
• Center bracket drawings: 5.50 in (141 mm) and 4.375 in (111 mm), unlabeled
• Every bracket drawing prints 2.00 in (51 mm) and 3.125 in (79 mm) without labels
• Each mounting footprint is drawn at actual size with no dimensions

Bracket load and shims

• Mount to blocking or other suitable structural material
• Installer-chosen fasteners so each bracket supports 400 lbs (181 kg)
• One 1/16 in (1.6 mm) shim per bracket: projection on a wall or door
• Shims also level a ceiling mount or adjust the jamb distance
• Lutron recommends no more than two shims under any one bracket

Finishes and foot covers

• Aluminum: PWH Pure White, CLA Clear Anodized, BLA Black Anodized
• Aluminum: SN Satin Nickel, BRS Brass, SGT Satin Graphite
• Brass: AZ Aged Bronze; seven finishes in all
• Wall and ceiling end brackets include one foot cover, center brackets two
• No shims in SN, SGT or AZ
• CLA or BLA suggested as the shim match

Roll-up limit

• Finish table: 3.25 in roll-up limit, no metric value
• Wall, ceiling and door end bracket rows, every center bracket row
• The jamb end bracket rows print none