You searched and this document matched it.
See all results085736 · CAD Drawing · Rev A · English · PDF, DWG, DXF
Lutron Palladiom Wire-Free Roller Shades CAD Drawing: Butt & Pass Corner Application Drawing Detail (085736)
Lutron's two-sheet CAD detail of two Palladiom Wire-Free shades meeting butt and pass at a corner, ceiling bracket shown.
Lutron 085736 Rev A, Palladiom Wire-Free Roller Shades CAD Drawing: Butt & Pass Corner Application Drawing Detail. https://assets.lutron.com/a/documents/085736.pdf, via https://newwaykl.com/resources/lutron/roller-shades/palladiom-wire-free/lutron-palladiom-wire-free-roller-shades-cad-drawing-085736/
About document 085736
Lutron drawing 085736, revision A, is the butt and pass typical details drawing: idler placement, tube and maximum roll-up, reverse roll light gaps, measurement deduction and minimum recommended clearances.
What drawing 085736 covers
Lutron document 085736 has these five sections. Each link opens the PDF at that page in a new tab.
- Idler placement note, opens in a new tab page 1
- Tube, maximum roll-up and reverse roll light gaps, opens in a new tab page 1
- Ceiling bracket and the section drawing reference, opens in a new tab page 1
- Measurement deduction, maximum roll-up and minimum clearances, opens in a new tab page 2
- Factory clearance note on both sheets, opens in a new tab page 1
Specifications in 085736
Lutron document 085736 prints 13 values in the groups the document uses, each with the document's unit. The page link beside each group opens the PDF where the group starts.
Sheet 1, auxiliary view
PDF page 1 of 085736, opens in a new tab- Tube
- 2.25 in (57 mm)
- Max roll-up
- 3.25 in (83 mm)
- Reverse roll light gap, lower limit
- 1.75 in (44 mm)
- Reverse roll light gap, upper limit
- 1.25 in (32 mm)
- Idlers
- Must be in the corner; no room for battery change
- Bracket shown
- Ceiling bracket
- Scale
- 1/4; a second scale of 1/8 also printed
Sheet 2, auxiliary view
PDF page 2 of 085736, opens in a new tab- Measurement deduction
- 4.25 in (108 mm)
- Max roll-up
- 3.25 in (83 mm)
- Minimum recommended clearance
- 0.50 in (13 mm), printed three times
- Surfaces labeled
- Wall; ceiling
- Scale
- 1/2
Both sheets
PDF page 1 of 085736, opens in a new tab- Revision
- A
Facts Lutron states in 085736
The values Lutron document 085736 states, as published:
- What the drawing shows
- Auxiliary views of two Palladiom Wire-Free shades meeting butt and pass at a corner, ceiling bracket shown, on two sheets
- Corner end
- The idlers must be in the corner, since there is no room for a battery change at that end
- Tube
- 2.25 in (57 mm)
- Maximum roll-up
- 3.25 in (83 mm), printed on both sheets
- Reverse roll light gap
- 1.75 in (44 mm) at the lower limit and 1.25 in (32 mm) at the upper limit
- Measurement deduction
- 4.25 in (108 mm), printed without saying which measurement it is taken from
- Minimum recommended clearance
- 0.50 in (13 mm), printed three times on sheet 2 without saying which surface each is measured to
- Surfaces labeled on sheet 2
- A wall and a ceiling
- Clearance responsibility
- A shade installed as supplied has the clearances it needs, and the master technician keeps them after installation
- Section drawing reference
- System height and detailed mounting requirements come from a section drawing, which the sheet does not number
- Revision and date
- Revision A on both sheets, no date printed
- Scales
- Sheet 1 at 1/4 with a second scale of 1/8, sheet 2 at 1/2
- Files
- Two-page PDF with DWG and DXF versions on assets.lutron.com
Questions about document 085736
The answers come from Lutron document 085736 and New Way's record of it.
What is Lutron drawing 085736?
Lutron's two-page auxiliary view drawing of the corner, with no date printed, published as PDF, DWG and DXF files.
Which revision of 085736 is current?
Rev A is the revision Lutron publishes. New Way checked it against assets.lutron.com on 16 October 2026.
Which roller shades does 085736 cover?
Lutron Palladiom Wire-Free roller shades.
Which end of a Palladiom Wire-Free shade goes into the corner?
The idler end goes in the corner, per Lutron drawing 085736: there is no room there for a battery change.
How big does the fabric roll get?
Lutron drawing 085736 prints a 2.25 in (57 mm) tube and a 3.25 in (83 mm) maximum roll-up.
What light gap does a reverse roll shade leave?
1.75 in (44 mm) at the lower limit and 1.25 in (32 mm) at the upper, per Lutron drawing 085736.
What deduction and clearances apply at the corner?
Lutron drawing 085736 prints a 4.25 in (108 mm) measurement deduction on sheet 2.
The sheet prints a 0.50 in (13 mm) minimum recommended clearance three times, without saying which surface each is measured to.
Who is responsible for clearances after installation?
The master technician, per Lutron drawing 085736, keeps the clearances after installation. A shade installed as the factory supplies it already has the clearances it needs.
Other Palladiom Wire-Free CAD drawings
CAD drawings for the same Palladiom Wire-Free system:
All 31 Palladiom Wire-Free CAD drawingsDocuments used with 085736
Lutron drawing 085737 is the corner to corner detail and 085632 the wired Palladiom butt and pass detail. Lutron drawing 085736 refers to a section drawing without naming it; the ceiling mount section views are 085713 and 085723.
| Document | Type | Revision | Date |
|---|---|---|---|
| 085708Roller Shades Specification Submittal | Specification Submittal | K | Jun 2025 |
| 045908Roller Shades Installation Guide: Electronic Drive Unit (EDU) Replacement | Installation Guide | A | Jul 2022 |
| 045913Roller Shades Installation Guide: Setup | Installation Guide | C | Sep 2023 |
| 048868Roller Shades Application Note: Shade Drive Sealed Battery Removal and Replacement | Application Note | A | Jul 2026 |
| 048802Roller Shades Application Note: Shading System, Door Applications | Application Note | A | Oct 2021 |
| 3686194Roller Shades Product Brochure | Product Brochure | C | Mar 2025 |
| 3671319Sivoia QS Product Brochure: Residential Shading Solutions | Product Brochure | K | Feb 2023 |
Revisions of 085736
This page always shows the revision Lutron publishes today. Lutron replaces the file in place and does not keep earlier revisions online.
| Revision | Date | Status |
|---|---|---|
| A | Not stated | Current. The file on assets.lutron.com. Checked 16 Oct 2026. |
Not covered in 085736, and what to read next
Lutron drawing 085736 gives no system height, bracket fixing or pocket detail and no shade width or fabric data.
Publisher and citation for document 085736
Lutron Electronics Co., Inc. publishes document 085736, Rev A, and serves it from assets.lutron.com. New Way hosts no copy and last checked the file there on 16 October 2026.
Lutron and Palladiom are trademarks of Lutron Electronics Co., Inc.
Reviewed by Edmond Hong, Technical Specialist, New Way.
Specifying Palladiom Wire-Free?
New Way supplies and installs Lutron Palladiom Wire-Free shading in Malaysia and Singapore. A New Way specifier can check your shade schedule and drawings before you submit.
The form opens with document 085736 filled in.
